HOW TO FIX A WASHER THAT BOUNCES AND CANNOT FISHING SPIN CYCLE BY REPLACING SHOCKS
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2020
- HOW TO FIX A WASHER THAT BOUNCES AND CANNOT FISHING SPIN CYCLE BY REPLACING SHOCKS
If you have washer that does not finish the spinning cycle because it starts shaking and being out of balance in this video we will show you what was the problem with our washer and how we fix it. We needed to replace the shocks in order to fix the washer and after that it had no problem finishing the spin cycle. One of our shock was completely done and that is what causes the washer to shake and lose balance. Another common problem that can cause a washer not to Finnish the spin cycle because of shaking could be bad drum spider arm / drum flange being corroded. We will make a video in the future how to fix that. Hopefully this video will help you fix your washer that won't finish the spin cycle. It could be multiple factors that can cause a washer to shake and not finish spin cycle.
► Shocks 1 pair ( check part number for your washer): amzn.to/2UZBPEs
► Shocks the other pair ( check part number for your washer): amzn.to/2yDPauH
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. - ยานยนต์และพาหนะ
![How to fix Shaky Samsung Spider Arm Washing Machine [FIXED] Imbalanced - Replacement, Flange Shaft](/img/n.gif)
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
LITERALLY LY THE GUY THAT TEACHES ME HOW TO FIX MY CAR! The washer machine just broke. crazy to end up on your channel. Thanks for all the Chevy Cruze Videos!
Thank you sir for variation from the Automotive repair, it breaks up the monotony, and a valid need to know task. A long time sub, keep up the great work, keeping the car running, and keeping the wife happy with washing machine repair, if moma is happy, then we're all happy 👍✌️
Wow I went from watching a rapair for my benz to fixing my washer.. You're a beast!
Just a tip for those who find the bottom washer opening is just way too tight for them, it's a somewhat easier to access every single bolt that needs to be removed on these shocks from either the back panel or front panel of the washing machine (However, you do have to remove the front cover). There are 4 holes on the back panel, and 4 on the front specifically for the shocks. You will need a 13 mm socket as well as a 6" extension to reach them all.
Thanks helping me to fix my porsche and now my washer, nice job
Very good advice, one of the best fix it videos I've seen
buddy thanks a lot for your help very clear and to the point
Thank you we just got a new LG washer and I was wondering why
Thanks for an expertly done video
Brilliant video please make more
Great DIY, safes a lot of money and is not that hard to swap out.
Thk you for the video
I need to remove my fireplace insert. Can you make a video of it?
Guys guys guys guys !! Favorite word of yours 😂
Might I ask but... where do you originally come from? I might be mistaken, but in the video I saw you wearing something closely resembling a Martenica (Мартеница)??? Just curious... :)
It's either the worn shocks or spider arm. These spider arms fail because of high Zinc content of spider arm (corroded via Galvanic shock). Having worn shocks will cause the weakened spider arm to fail more quickly. But... it may be too late for yours :(... and my own.
Interesting that your machine has 4 shock absorbers, rather than 2. It seems to be the case for larger machines. Also noticed thatyour machine has separate hot & cold water inlets. Most UK machines used to have these.
yellow shocks to the back?
You guys rock. I watch you for auto. Your very awesome and seem bery kikd humble and loving. Do yku have time to talk about our Lord and Savior Jesus Christ?
Thank you for this video. However, I have an LG front loading washer, and found another TH-cam video specific to the LG washers (th-cam.com/video/X_T98WlwrYI/w-d-xo.html) which was really quite good... had additional suggestions such as checking that the leveling feet are properly adjusted, checking which side of the machine the computer/electrical boards are on, and laying the machine on the opposite side (I noted that even though you said you had turned your machine upside down, you had actually just laid it on a side, so you could access the bottom) . He also suggested just putting some bearing grease on the lower (exposed metal rod part of the shock), rather than replacing them. So far... that has worked for me.
Part number please
Looks like same shakes
The rrsistance looksd the same.
Bro I thought those were car shocks that he was gonna put inside it & turn it on 🤣
Srevice
Nothing but a ripoff, it is nothing more than dampening grease used in the cylinders!! Get some off ebay and just re-grease when they start going bad!!!
How so?
@@qdogggp after some deep research, I figured out that the manufacturers use a type of grease called "dampening grease" it just has a heavier consistency to it and works like a shock absorber, very clever!!!!!
@@terryt9153 thanks for the response. I bought new ones and they were the same as the old ones.
how do you remove the top
thumbs down for me
You just slow bro