Repair switch for 6501EA1001. Used for 1year old LG Top loader. WT7155CW. Glad it worked and I changed it myself. They dont make them like they used to. Easy to replace once I figured how to take the top off. Cost $47.16 for part and $20 for fast shipping. I need my washer! 😅
This video helped me out, the only problem was that the piece I ordered from Amazon the string part was too short. I bought the piece from clicking the link on this video. I just ended up swapping the old plastic string with the new one & it worked. My model is an LG WT7300CW
I wish someone would explain how the switch works. Because going from Pin 1-3 even on a brand new switch givee 23 ohms and this reading doesn't change even if you blow through the pressure hose as hard as you can
The switch is a pressure transducer with a cmos chip inside, it isn’t like a regular pressure switch. The only way to check it is to see if you get the ~22ohms from pins 1-3 and if it still rattles when shaken, unless of course you use an oscilloscope to check the output.
I bought a replacement unit and fitted it myself following this brilliant video. My machine 14 kilo LG. Cost of genuine part $25
Repair switch for 6501EA1001. Used for 1year old LG Top loader. WT7155CW. Glad it worked and I changed it myself. They dont make them like they used to. Easy to replace once I figured how to take the top off. Cost $47.16 for part and $20 for fast shipping. I need my washer! 😅
Glad we could help outQ
This video helped me out, the only problem was that the piece I ordered from Amazon the string part was too short. I bought the piece from clicking the link on this video. I just ended up swapping the old plastic string with the new one & it worked. My model is an LG WT7300CW
We are glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.
Thanks for the video. Hopefully this fixes the flooding that just happened.
Check the switch, he says. How? What are we looking for as indicators of good health or failure?
I wish someone would explain how the switch works. Because going from Pin 1-3 even on a brand new switch givee 23 ohms and this reading doesn't change even if you blow through the pressure hose as hard as you can
The switch is a pressure transducer with a cmos chip inside, it isn’t like a regular pressure switch. The only way to check it is to see if you get the ~22ohms from pins 1-3 and if it still rattles when shaken, unless of course you use an oscilloscope to check the output.
sir LG hauzen 10kg
set 47 minutes its spining but 27 minutes its stop to spin and not drain..wats the problem?
What is your model number?
@@appliancepartspros SEW-4HW126A
@@appliancepartspros SEW-4HW126A
How to test lg washer sensor?
What is your model number?
Good explain.
Thanks🌹
Do you test it on pins 1 and 3?
Yes
@@ChosenOne9387and between pin 1 and 2.... and 3 and 2. Must it give reading? Got troubles with my samsung too loader.
Thank you
If the hose is good just replace the Switch. much simpler.
I was thinking the same when he was trying to cut the tape
I cant get the right pressure switch for my LG washing machine
What is the model number of your washer?
"Check the water level pressure switch and replace it if needed". How do you check it ? Thanks
If you have a multimeter you can test it for continuity.
@@appliancepartsproshow????