Great video. One thing he doesn't mention, is that the numbered holes on the bottom of the element, are not pre-drilled. At least, the weren't on mine. Be very careful, and drill those holes at a low speed.
Excellent instructions for raising glass top to repair burners. Do you have a video for locating the fuse for the oven for this same Kenmore stove. Thanks for making it easy.
Good instructions. I just installed a dual element Frigidaire burner, I did not take a picture of the wiring. The center part heats up, but the outer ring only goes 3/4 way around. Did I cross one of the wires?
Great video. I have a frigidaire glass top that has a problematic front right burner, everytime I turn that burner on i can hear it sparking behind the knob and one of my kitchen lights dim when it sparks. Any ideas?
Bill, the burner im having a problem with heats up on high but when I try to maintain a medium or medium high level of heat the burner sometimes goes off. Is this some kind of thermostat problem? Thanks for your help.
Good video. I have a stove just like this and within in few months I had to replace a small burner. Now it has burned out, The other small burner is also out. Now the large burner the inside of it has burned out. This stove is only two years old. Is this just a piece of junk? No happy with this stove. I think of buying some else. If I keep this up I would have a fortune in it.
Hello I have a Kenmore glass top that just clicks when burner is turned on. No power to the board until it clicks a little then have power but no heat to element thanks
Have a burner that still won’t work. It is the front left dual burner (simmer select) on a Kenmore range. I have replaced the burner (before testing, but ended up testing both and they both work). So, thought it might be the burner switch, so replaced it, burner still doesn’t work although I discovered that if I turn on simmer select the burner will warm up but doesn’t come on fully. I am thinking it must be a board as I didn’t see any broken wires or loose connections. Any thoughts?
the burner im having a problem with heats up on high but when I try to maintain a medium or medium high level of heat the burner sometimes goes off And gose on Back again itself but it doesn't stay on when i want. And there is no video on youtube about that .. please help me about this .. thanks
Hello Bill do you have a service where I can call you to repair our front load washers and dryers? we get all the front loads washers and dryers from store turn ins
I have this problem on my 99 Kenmore stove. I was cooking last night, and the burner suddenly quit working. A few weeks ago, it was making an odd clicking sound as if the power was straining to come on. As I'm moving to a new house in less than a month, which has a new stove, I don't want to go to the expense of fixing it. But it will mean that I'm going to have one less burner for my holiday cooking. :(
Thank very much you went step by step and speaking clearly and slowly explaining everything..even a dummy like me knows now ..keep it up ..thanks again.
ok saludos amigo tengo una frigidayre pero se me le kemo el transformador ke va en la placa digame usted como pongo a funcionar las estufas electricas sin la placa osea directas como hacer esa conexion se lo agradeseria porfis
Thanks Bill, you rock!! I've fixed so many things at home and for friends! Thanks for the videos!!! Love to learn!!!
Thank you Bill for your excellent easy to understand video. God bless😊
When you unscrew the stove top you can flip the whole thing over. Found it to be a little easier. Cheers
New sub. Thanks. No husband and no money. Always need and enjoy DIY.
Thanks for your help Billy, I have a question I need to replace the burner, the model # how can get it without out being removed please
Great video. One thing he doesn't mention, is that the numbered holes on the bottom of the element, are not pre-drilled. At least, the weren't on mine. Be very careful, and drill those holes at a low speed.
Thank you, excellent explanation. Have a great day!
Excellent instructions for raising glass top to repair burners. Do you have a video for locating the fuse for the oven for this same Kenmore stove. Thanks for making it easy.
Straightforward, excellent demonstration. Helped me repair my cook top. Thank you.
The ones in the back are the real beauty
Bill, I wish you made a video for every job I might ever have to do. Great, great job. New subscriber here. Thank you.
Very comprehensive.
Excellent video man. You definitely helped me out in understanding what I’m about to get into, how to approach it and what to look for. Thanks a ton.
Good well done!I just installed my new burner.👍🏽
Awesome. Thanks for the help. Just what I needed to know.
Thanks for detail video and explanation.
Thank You Sir . Good Information to me and to the World.
Very well explained, thanks 🙏🏽
CHYEAH BUDDY 🤙🤙🤙YOU JUST MADE ME LOOK LIKE A SUPER HERO 🕺THANKS DUDE ✌ ✌✌
Good work. You guys don't do enough cussing! Keep up the good work😀
Thank you! Very helpful!
You sir, have just saved me money. Thanks
excellent explanation thanks 👍🏼
Outstanding explanation !! Thanks !!
exelent video but where do you get parts thanks bill
Good instructions. I just installed a dual element Frigidaire burner, I did not take a picture of the wiring. The center part heats up, but the outer ring only goes 3/4 way around. Did I cross one of the wires?
Great video. I have a frigidaire glass top that has a problematic front right burner, everytime I turn that burner on i can hear it sparking behind the knob and one of my kitchen lights dim when it sparks. Any ideas?
unfortunately The very talented man Bill who made this video passed away a couple of years ago that's why you don't get a reply.
Thanks Bill!
Bill, the burner im having a problem with heats up on high but when I try to maintain a medium or medium high level of heat the burner sometimes goes off. Is this some kind of thermostat problem? Thanks for your help.
great video on newer appliance with great tips keep the coming thank you
Good video. I have a stove just like this and within in few months I had to replace a small burner. Now it has burned out, The other small burner is also out. Now the large burner the inside of it has burned out. This stove is only two years old. Is this just a piece of junk? No happy with this stove. I think of buying some else. If I keep this up I would have a fortune in it.
Excellent video. Extremely helpful. Many thanks.
Great sweat shirt!!! Thanks for the tips and demo!
What's that flying into the air at 11:07?
So the back of the stove top is hinged? No chance of shifting it forward or backward?
Burner and switch both replaced simmer burner still will not work? What’s next?
smooth and very clever. good job, thanks
Hello I have a Kenmore glass top that just clicks when burner is turned on. No power to the board until it clicks a little then have power but no heat to element thanks
Have a burner that still won’t work. It is the front left dual burner (simmer select) on a Kenmore range. I have replaced the burner (before testing, but ended up testing both and they both work). So, thought it might be the burner switch, so replaced it, burner still doesn’t work although I discovered that if I turn on simmer select the burner will warm up but doesn’t come on fully. I am thinking it must be a board as I didn’t see any broken wires or loose connections. Any thoughts?
troubleshooting starts at 4:07
Hi Frigidaire burner comes on but switch is touchy to where it clicks on. Is this definitely a switch issue. Or could it still be burner.
Hi where is the best place to get the same part that you replace on this video? Cuz I have the same stove...
Great video thanks for sharing.
the burner im having a problem with heats
up on high but when I try to maintain a medium
or medium high level of heat the burner
sometimes goes off And gose on Back again itself but it doesn't stay on when i want. And there is no video on youtube about that .. please help me about this .. thanks
valuable stuff, thanks ...
Well done, Semper Fi
I'm lucky! Mine is a GE range that was made for SEARS and has a Hi/Lo switch on it for the power boil!!!
Only the outter ring of my tri burner is working. How do you trouble shoot that?
Front right large burner goes to high heat no matter what the dial is turned to?
Hello Bill do you have a service where I can call you to repair our front load washers and dryers? we get all the front loads washers and dryers from store turn ins
I just replaced,working outside element only.Did I wired wrong?
My whole cooktop just stopped while I was cooking. It is 5 weeks old. The whole cooktop does not turn on. Any ideas
Could u pls share a pic of your wiring I forgot to take a picture of mine
My burner is light up all the time with the leters HE blowing air but when l turn the switch on does not work thanks
I have this problem on my 99 Kenmore stove. I was cooking last night, and the burner suddenly quit working. A few weeks ago, it was making an odd clicking sound as if the power was straining to come on. As I'm moving to a new house in less than a month, which has a new stove, I don't want to go to the expense of fixing it. But it will mean that I'm going to have one less burner for my holiday cooking. :(
LucilleB x
who sell the replacement burner
Our Kenmore glasstop stove has a burner that goes to high heat no matter what setting it is on. How can we fix this problem? Thanks for your help.
Replace the infinite switch that controls that burner.
Thank very much you went step by step and speaking clearly and slowly explaining everything..even a dummy like me knows now ..keep it up ..thanks again.
ok saludos amigo tengo una frigidayre pero se me le kemo el transformador ke va en la placa digame usted como pongo a funcionar las estufas electricas sin la placa osea directas como hacer esa conexion se lo agradeseria porfis
Porfis
Semper Fi Brother
My inside isn't working..already replaced the burner, same issue
I mess up with the wires and I didn’t take pictures before. What would happen if I hock wires in the wrong place?
Oh man, how did it go?
I just did the exact same thing today, haven't trued putting them back but I did take pictures
I just bought this stove 6 months ago and it's messing up already I regret buying it.. I should have stuck to a regular old-fashioned stove instead
what does sab mean all I try to do is set the clock
Troubleshooting ice maker
Part number?? Pls
Thanks Bill!