DIY Kerfed L Ported Stained Front Baffle Subwoofer Box

It is a very good day to apply most common techniques in building car subwoofer enclosure. And the 3 most common techniques are: Carpeting the side panels, staining front baffle and kerfing the port. Also a 4th technique is added in the mix and that is how to seamlessly tuck the carpet in the notches of the box. So sit back, relax and enjoy the show.
00:00 - Shopping for some good quality plywood at Wilcon home depot.
01:00 - For a FREE subwoofer box schematic. Go to this link - www.tinkercad.com/things/abo1...
01:40 - The table saw is truly the hardest working horse in the shop.
02:00 - Wood glue can be used to caulk the box air tight. No need to get silicone and such.
02:20 - How to bend plywood by kerfing. Soak it with water and bend.
02:35 - Use lots of clamps in holding it to place a perfect 90 degree bend. An all purpose adhesive can be used to fill the plywood kerf gaps and cuts to strengthen it super strong.
03:15 - This is a quick technique in measuring a speaker's mounting hole diameter: 2 pieces L square can measure the diameter accurately.
03:50 - Properly sand the kerfed front baffle with 120 and 240 grit sanding paper. After that, stain away!
04:05 - Apply 1 coat of polyurethane on the baffle after stain has dried to give it a shiny and smooth look and feel.
04:35 - The 4th technique is applied here: Cut about 1/8 of an inch deep groove. This will be used to tuck the carpet seem for a more seamless look and feel.
05:35 - Glue all panels together except the top. Lots of clamps needed here.
05:50 - 2 pieces Category 7 CS12-250 subwoofers unboxing time!
07:00 - Subwoofer box carpeting time!
08:30 - All done. Final product showcase time!
09:00 - Expert box builders should verify the final and actual subwoofer system tuning and impedance. I use Dayton Audio DATS v3 in testing almost everything audio-electronics.
That's it. I hope you all enjoy our little show for today and stick around for the subwoofer bass test video next week. Thank you for watching. Have a nice weekend everyone!

[@moyadmoyad6267]

Very hard work. My friend, I have a carpentry shop and make a lot of speaker box. I care a lot in this field

[@chrclmnky]

Thank you sir. Good to know.

[@ronniegarcia561]

Saan po kayo.

[@ebresteralsina1598]

Where are u from?

[@chrclmnky]

@@ebresteralsina1598 Butuan City

[@moyadmoyad6267]

Jordan

[@jr1001jr]

Bro, I'm sure that your Carpentry Journeyman/Trainer/Mentor is very proud of you.
👍😎👍

[@jA-en7iu]

Brasil, São Paulo - Gostei do seu trabalho, você é muito detalhista na construção da caixa nota 1000

[@Rat-oe4vi]

Beautiful and the sound is great

[@chrclmnky]

😇

[@DubHead69420]

Damn, what a beautiful box! 😍

[@chrclmnky]

😊

[@sushilbiradar8449]

Awesome work 👍

[@user-sr7fo5fe6x]

Sweet... I'd gladly have that in my kit.

[@chrclmnky]

Right on

[@johnysmashalot411]

Man this dude makes it look so easy... Good shit bro... Mad props...

[@chrclmnky]

Thanks.

[@boomboom2673]

BRO YOU A GENIUS

[@chrclmnky]

Thanks Boom Boom.

[@leonardofelipedepaulacampo2863]

Exelente serviço, parabéns

[@DJWizmuzk]

Very neat and detailed work bro 🇯🇲

[@chrclmnky]

Big up

[@garlicbad]

Nice to have a home center in your town.

[@chrclmnky]

Hello Ethan, right now there are at least 6 home depots in my very small town.

[@13BTRX3]

Beautiful job!

[@chrclmnky]

👍😎🤘

[@JuanManuel123ify]

Una verdadera obra de arte compañero.....Gracias por compartir su maravilloso trabajo con nosotros....un gran abrazo desde Las Islas Canarias (España).....

[@chrclmnky]

Thank you, Juan. Cheers from the Philippines. 😃

[@hakanyigit868]

Nais kong ibahagi mo ang mga sukat. Gusto ko ng ganito

[@kevinwilliams1726]

Good work. Came out great 👍

[@chrclmnky]

Thanks 👍

[@scottiffanimccord1509]

Love it good job, thank you!

[@chrclmnky]

😊

[@1ohmwrecker]

Damn that turned out gorgeous! 👏

[@chrclmnky]

Tnx 😎👍

[@kuldeepkd6419]

Great work 👍

[@chrclmnky]

Thank you so much 😀

[@tangoalpha8381]

Parabéns amigo ficou excelente!!!

[@chrclmnky]

Thank you Antonio. 🙂

[@jairorinconesperales]

Felicitaciones siempre con proyectos espectaculares. Saludos.

[@chrclmnky]

Thank you again Jairo. Cheers. ☺️

[@nnoficial2334]

Mantep lur ilmu nya patut di tiru

[@Joaovmachado]

Nice job bro. Congrats!!

[@chrclmnky]

Thank you JV. Cheers. 🙂

[@pio2516]

I love your job.👍👍👍👍

[@chrclmnky]

Thanks!

[@roquemarc4717]

grabe Ganda ng pagkakagawa❤

[@adam_1dizon121]

Dope ass build bro.. I wouldn't be surprised on how good those entry level subs sound on 500 watts

[@chrclmnky]

Thanks brother. Nice to see you again.

[@adam_1dizon121]

@@chrclmnky no doubt bro.. I'm always here keep up the great builds

[@mukeshas2125]

Good work

[@chrclmnky]

Thanks Mukesh

[@VivoVivo-ib4qk]

Nice DIY Speaker nice Design

[@chrclmnky]

Thanks

[@gabrielborini1773]

Mano só projeto brabo!!!! Um salve do brasil

[@royvalle9976]

Good job

[@chrclmnky]

Many thanks. 😍

[@Live_Loud]

Lovely! You must be charging hefty charges on such boxes! Because they deserve it!

[@farhanhakimi136]

Nice work

[@chrclmnky]

Thank you! Cheers!

[@rajkumaarkumaar2039]

Best of best💯
Diy builder
Fan from🇮🇳

[@chrclmnky]

Thank you Rajkumaar. Nice to see you again.

[@thor2408]

Excellence work

[@chrclmnky]

Thanks

[@soloxb]

Superb

[@chrclmnky]

Thanks 🤗

[@martinobarranca5435]

Very good job man

[@chrclmnky]

Thanks Martino.

[@user-gt1ww2sg1p]

very beautiful😊😊😊

[@chrclmnky]

Thank you 😎

[@blind7800]

wooww, nice job!!

[@chrclmnky]

😊

[@chongthammeghachandra3721]

Nice ,pliz Make Inbuild Speaker subwoofer

[@edud8452]

Nice work man as you saw I have the sub box with the center port Im going to try a side ported box like this to see the difference I've heard it would be louder with the subs in a common chamber like this. awesome video👍

[@chrclmnky]

Nice to see you again Eric. I opted to have a common port to save a lot of space. And i like the design too. ☺️

[@louiedjtv7839]

Nice idol.keep it up.
My support done.
Stay connected.Godbless

[@chrclmnky]

Thanks 😄

[@mariaivasousanascimento28]

Parabéns belo trabalho..

[@chrclmnky]

Thank you Marciel.

[@cortessarge5399]

wow very.professional.nice job

[@chrclmnky]

Thank you Sir. Nice to see you again

[@cortessarge5399]

@@chrclmnky likewise sir keep safe..

[@bonher69]

Very nice

[@chrclmnky]

Thanks

[@leog978]

Panalo ang pulang stain pre. Gawa ka na ng table saw extension!

[@dvjturngwongputhon3964]

สุดยอดครับ👍👍👍

[@chrclmnky]

Thank you so much. 😎😍

[@gameislife4777]

Nice boss pulido tlga ng mga gawa mo parang pang factory made na 👍

[@chrclmnky]

Thank you po sir ng marami. 😁

[@douglasribeiro4635]

Top. Você é um gênio.

[@chrclmnky]

Thank you Douglas.

[@xharlan03x]

ganda naman!

[@chrclmnky]

🧨🧯😎

[@thepnimit...7043]

1:30
2:11
The assistant.
8:27 Beautiful.

[@chrclmnky]

😁

[@rolandmendoza5953]

Ang husay talaga ni bossing

[@chrclmnky]

🌞😎

[@vinayagatvserviceporulur4635]

I AM IN INDIA YOUR WORK IS SO AMAZING AWASOME BRO

[@chrclmnky]

Thank you Vinayaga.

[@oscarespinoza8451]

...impecable.!👏👏👏👏👍😀

[@chrclmnky]

Thanks Oscar, nice to see you again sir.

[@cesarcastellin2037]

Hola desde Venezuela la alfombra ya paso se moda usa el texturizado de todas manera haces un buen trabajo

[@chrclmnky]

Thanks but carpet is still the king.

[@oxy6165]

wow anganda 🤩

[@chrclmnky]

😄

[@ryanwhitehead34]

something I wanna get into. watching your videos. made me order some svd skar audio 8 but I wanna do a box for 3

[@chrclmnky]

3 subs are nice.

[@ryanwhitehead34]

that bending shit looks sweet af. you got nice hustle man. hope you make a descent $$.but is that a app to come up with the configurations

[@chrclmnky]

@@ryanwhitehead34 😎🧯🔥

[@buendu3049]

ang ganda...

[@chrclmnky]

matsalams

[@morrisonfredd9726]

Lindo cajon sos un crack amigo kisiera uno de esos para mi

[@chrclmnky]

thanks

[@csuprocurement765]

Ayos Yoyo Iking !

[@chrclmnky]

😆

[@believersmedium9428]

napa subscribe ako napaka galing ng talent niyo po sir idol.

[@chrclmnky]

Matsalams po sir.

[@74midwestbass74]

AWESOME WORK BRO!!!

[@chrclmnky]

Thanks. How you doin brother.

[@74midwestbass74]

GOOD BRO! Trying to figure out a design for my BASS VAN BUILD!

[@chrclmnky]

@@74midwestbass74 you have all the time in the world to design one or two. For me it would take forever to realize the project. 😭

[@74midwestbass74]

@@chrclmnky NO WAY!!! You already build AWESOME boxes! Now you just have to make a bigger one

[@chrclmnky]

@@74midwestbass74 im getting there. Need to save a lot. Still have to body repair my van. Repaint. And boom Bassin' time! One thing is not cheap is the AGM batteries though.

[@antonioperezprado5489]

Hola amigo q calibre de cables me recomiendas para estos woofers , calibre 12 o calibre 10? Saludos desde mexico

[@jeproxcreationsteamaudioph5255]

Tibay kaau pagka arit sir! 💪

[@chrclmnky]

Matsalams sir

[@JohnCarloDeJesus]

Bro what size of t-nut and allen are you using? They seem to fit perfectly in all your projects. Thanks!

[@chrclmnky]

Hello John. I use different sizes of T-nuts and bolts. In this project were M4 T nuts and Allen head machine bolts. Same size as Pioneers. JBL's usually are M6. Others were M5's.

[@adrianestanislao926]

Ang husay lodi

[@chrclmnky]

Thanks po. 🐶

[@XxTrustNoOnexX]

Perfect

[@chrclmnky]

How you doin brother.

[@XxTrustNoOnexX]

@@chrclmnky It's going well ... Your videos will always improve my mood even more 👌🙏

[@chrclmnky]

@@XxTrustNoOnexX good to hear

[@gustavoguillen6926]

Clean

[@chrclmnky]

Thanks Gustav

[@ef3banakarolinasantosfaria5]

Brasil muito lindo cara

[@chrclmnky]

Thanks very much

[@ferminponcerafael2464]

Tienen Que sonar Una Maravilla.

[@chrclmnky]

Yes they do. Thanks.

[@yamaha3606]

Como se llama el programa que usas para sacar medidas cubicas en las cajas acústicas?

[@ramakantghorse1357]

Good

[@chrclmnky]

I am delighted.

[@pradipkumarkar5106]

I request u to give some sound test demo at the end of the vdo. I love ur vdo.

[@chrclmnky]

Thanks Pradip. Sure 😊

[@rajchopra41991]

Hello sir u are doing a great job sir
I need to know the box measurements so it can fit in my hyundai elantra 2015

[@chrclmnky]

Thanks very much. This will fit. For the layout and dimension, there is a link to the TinkerCad file in the video description.

[@rajchopra41991]

@@chrclmnky thank you sir

[@nomatik6096]

you can make a test at the end of the video,It would be cool)

[@chrclmnky]

Hello Nurken, I usually shoot another video for the subwoofer tests. Watcg out next week for that, subscribe now. Thanks.

[@moppi5965]

Nice Build! Can you sometime use DD audio subwoofer? Digital desing.

[@chrclmnky]

Ok will do. Thanks.

[@giuseppebosco4269]

good job. What software do you use to calculate the box and hole size

[@chrclmnky]

Thanks. Bass Box 6 Pro for calculations and TinkerCad for the schematics.

[@richardabrique.589]

New subscriber here boss. Maganda b ang bass ng category 7 boss as in quality soft b sya. Yun kc ang hinahanap q soft bass pero malakas. Yung tipong kht malakas ang bass nya masarap p rn sya pakinggan. Boss ano ang pwede i-partner jan na pang mid/hi. Ok b boss ang column speakers for mid/hi at ilan watss kaya boss? Thanks and God bless

[@formattedskys2992]

I want to learn to do the things you do

[@chrclmnky]

😉

[@simonivan4916]

Sample sounds lodi 🙏🏼

[@chrclmnky]

idol, pili pa ako mga new tracks na walang royalty. Abangers nalang idol. hehe

[@jdcb2331]

galing mo sir! gawa ka rin sir tutorial paano gamitin bassbox pro

[@chrclmnky]

Thanks po. Will do.

[@mikeperez6806]

Boss mag kano po dalawang speaker na ganiyan

[@athaningal6528]

boss galing mopo

[@chrclmnky]

Thanks po sir.

[@edwin_chew]

After building such massive numbers of beautiful and cool speakers, are there any for sale? 🤔🤔

[@chrclmnky]

Hello Edwin, boxes were orders from customers.

[@technicaldhruv3304]

Pls make a video on tower speakers 😁😄

[@chrclmnky]

Ok will do in the future.

[@shivamraghav91]

Sound :- ho ho ho (dog)🤣🤣😂😂

[@karyaseni9009]

mantap bos

[@chrclmnky]

Thanks Prince Rose

[@johncastro7481]

Idol.......

[@chrclmnky]

Matsalams John

[@MCKILLERHALO]

puedes darme por favor las medidas para un cajon asi de 18mm mdf tengo 2 pioneer ts w306 400rms gracias

[@chrclmnky]

Hello, kindly watch this video, dual Pioneer TS-A300D4, same speakers as TS-W306. For the schematics, go to the video description and find the link to TinkerCad schematics. Thanks!

[@younginfamou6053]

Ay bro how much would u charge for a box like this here ? But perhaps a bit bigger displacement for a 15” driver

[@chrclmnky]

Not so many doller$

[@younginfamou6053]

@@chrclmnky where are you located

[@chrclmnky]

@@younginfamou6053 Philippines

[@YegonVictor-tn1xz]

i have seen you put some soft materials in the box (other video) how does that help or what is it for

[@chrclmnky]

Hello. Theoretically it " tricks" the woofer to make the box appear "bigger". Also it cuts down inner box resonance therefore producing heavy bump.

[@YegonVictor-tn1xz]

now i know

[@user-mu8mr3us2n]

Красота. Позалипал

[@TheSpidersoftheworld]

hello i have an 15" 2000rms speaker. it needs 3.5-4 cu ft 35hz it's hectic series by Nemises.
do you have any birch wood box builds.
i am trying to build my brother a box all the boxes in the local area are made of MDF and blow apart.

[@chrclmnky]

Hello, yes i have plywood boxes made. Browse the videos on my channel. Thanks.

[@azeemshaikh908]

Nice,
can you put the link for the tools you use for these type of projects?

[@chrclmnky]

Thank you Shaikh. 😁

[@kevinjones7259]

I've been watching your work for a while & was wondering if u do custom jobs for your subscribers

[@chrclmnky]

Hello Kevin, yes I do actually most of these boxes were shipped to customers anywhere within the Philippines.

[@shivji8541]

Purchase kaise kare

[@jacobeukman488]

Any nice vented box designs for 2 x 12inch 1200 watt rms subs DVC 2 x 4ohm

[@chrclmnky]

You can copy this

[@jeanmarienathasha3340]

❤️😍

[@biggteez12]

What size of plywood do you use for your sub builds?

[@chrclmnky]

Just the standard 4'x8' plywood sheets with 3/4" inch thick (18mm).

[@biggteez12]

@@chrclmnky thanks guys I appreciate it. Thanks for the educational videos as well God bless

[@juancoroneljr9773]

Why kind of inserts and screws do you use?

[@chrclmnky]

Just T nuts and allen head carbon steel bolts.

[@Killjoy888]

Do you make boxes for others? Is be really really interested in a box

[@chrclmnky]

Hello Mitchell, yes all the sub boxes made here are for clients and customers.