How to Replace Timing Chain Set 2007-2013 Chevy Silverado
ฝัง
- เผยแพร่เมื่อ 8 มี.ค. 2023
- Buy Now!
New Timing Chain Set from 1AAuto.com 1aau.to/ib/1ATBK00158
This video shows you how to install timing chain set on your 2007-2013 Chevy Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obaZ/1AXAA00013
• Pry Bar 1aau.to/oMX/1AXAA00020
• 10mm Wrench 1aau.to/oQL/1AXAA00010
• 15mm Wrench 1aau.to/oQL/1AXAA00010
• 18mm Wrench
• 10mm Socket 1aau.to/oaWD/1AXAA00017
• 11mm Socket 1aau.to/obfg/1AXAA00015
• 13mm Socket 1aau.to/obfg/1AXAA00015
• 15mm Socket 1aau.to/obfg/1AXAA00015
• 18mm Socket 1aau.to/o8W/1AXAA00043
• 21mm Socket 1aau.to/o8W/1AXAA00043
• 24mm Socket
• 8mm Socket 1aau.to/oaWD/1AXAA00017
• Bearing Puller
• Belt Wrench
• Engine Hoist
• Harmonic Balancer Installer
• Harmonic Balancer Puller 1aau.to/oX/1AEHB00094
• Stretch Belt Tool 1aau.to/oi/1AXAA00114
• Trim Tool Set 1aau.to/o3F/1AXXX00006
• Hose Clamp Pliers 1aau.to/oeK/1AXAA00076
• Ratchet 1aau.to/obqj/1AXAA00016
• Socket Extensions 1aau.to/obfg/1AXAA00015
• Torque Wrench 1aau.to/oauv/1AXAA00044
• Drill
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/ozs/1AXSS00035
• Marker / Writing Utensil
• RTV
• 6mm Hex Socket
• Drain Pan 1aau.to/ovI/1AXAA00320
• Funnel 1aau.to/ogQ/1AXAA00310
• Hammer 1aau.to/oPQ/1AXAA00091
• Pick 1aau.to/oIY/1AXAA00037
• Pole Jack
• Punch
• Razor Blade / Gasket Scraper 1aau.to/oh4/1AXAA00280
• Rubber Mallet 1aau.to/ofY/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for the video. Im doing a 14 yukon denali awd. As i leave this comment and did a 13 silverado rwd already. Keep up the good work and dont let negative comments get you down. Thats just how some people are.
Need more videos of the 4wd variances. Not everyone is lucky enough to be working on a 2wd and I see most of the videos lean for 2wd more so thab 4wd.
You guys are awesome for uploading these... Thank You!!👍👍
I'm looking for the part number of the "Cam Bolt". Does know the GM part number?
How do you know if you need to change the timing chain?
IS THIS THE SAME PROCESS FOR A 2015 CHEVY TAHOE? THANKS
Do you have to use same dampener on chain w 3 bolt cam swap..can you use the ls6 black one...thx
Never pull the pan without replacing the oil pressure relief that is just above the oil filter, screwed into the pan itself (easily seen at 35:11 of the video) . IF the pump was replaced because of suspected oil pressure issues, chances are a new oil pump will NOT fix the problem. This oil pressure relief I mentioned is probably the issue - the spring weakens over time. Also, NEVER install the crank pulley with the front cover tight. Doing so can easily cause a misalignment with the crank oil seal in the front cover. Front cover should be tightened AFTER pulley is installed (or use a special tool for this). This will surely leak in a few thousand miles. Other than those things - this is really the proper way to replace the oil pump. The pick up tube o-ring and it's seating in the pump is the most important part. For a DIY, it's extremely difficult to get this properly installed without dropping the pan.
Doest the timing marks have to be at 12 o clock position on #1 compression stroke?
Aren’t you the same guy that was with A1 auto parts?
Could you tag me in a video of changing the timing chain on a 07 impala lt 3.9 L
Good job, 👍
Do you loose oil when taking the differential out!? Mine making noise after re assembly! Thanks
Hello my truck cranks but will start but sometimes it won’t and is sluggish sometimes i here no slap but could this be issue?
thanks
for vvt version?
Mine don’t line up. How do correct it?
What is the size of the engine?
No need to replace the two rivets you drilled out at 35:38?
About how many hours should a shop take to complete a job like this?
What type of puller is that called ?
+curtis brunner Specialty Tools
Bearing Puller
Belt Wrench
Engine Hoist
Harmonic Balancer Installer
Harmonic Balancer Puller
Stretch Belt Tool
Trim Tool Set
title isn't accurate 2011 on uses vvt whole different experience butch
Have to do this job at work very soon. Not looking forward to it.
Taking every damn thing off
15 mins into video I’m like I thought that we were just replacing the timing chain???
This is ridiculous.. lol is this a video
Of timing chain swap or a whole rebuild
Of the front end? Lmao good lord
I would just replace the chain only.
This is not necessary why did you take the whole truck apart?
+Travis McPherson We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
Probably would have been easier to just pull the whole Engine 😂
To much wrk for a do it urselfer...shop is gonna cost u big...