Great video and great job from the guys at truck toyz. It take a lot of tools and knowledge on doing stuff like that. I learn every day when it comes to builds on my H3. Take care and stay safe.
I agree, Manuel. The profile lines are getting better. I hope one day to replace the front bumper with a proper bull bar. That would complete the profile.
Saw you out at the island this Saturday with the clean up. Talk about a super pretty day. You were moving on that sand bro. I was doing a solid 30 on the way back from the jetty, you stopped disappeared and 10 min later you were back with me lol.
Brother, my cousin Marco and my buddy AJ are the ones who know their way around. I just shoot the videos and have fun. I will take you up on the invite but I don’t know much lol.
Robert really you take care SANDY I like to see people like you that love their vehículo 🚗 and no stop for nothing to do something good for your friend (SANDY) Robert like always God bless you and your family and friends
Thank you! Unfortunately, I didn't weigh it and it didn't come in the instructions. I run the Ironman nitrogen kit with standard springs and it doesn't impact the handling and no squat. I didn't delete the 3rd row cause I have grandkids and a niece and I can always use that extra space lol.
@@CoastalGX it's OK I'm sure I can find specs somewhere lol. You'll save like almost a 100lbs if you remove the 3rd row seats. Yea my kids love those seats too.
The bumper is solid as can be. It looks good to me and it works perfectly. The bad part was after I got stuck in the clay like mud months ago. I thought I had cleaned it thoroughly but the bumper has some deep crevices and I had to really dig in there to get the dried mud out weeks later. The other con was the retaining pin that holds the swingout arms. Just a little sea spray oxidized the pin so I had to marinate it with wd40 for a couple of days until it got freed up again. I added a little grease and it’s perfect now.
When I saw where that camera was going, I was worried that your jerry can wasn't going to fit in the carier with the butt end of the camera sticking through. How messed up are the backup/parking guide lines now?
Sensors work, but the front bumper doesn’t have them. So basically I had to deactivate them. The rear bumper is great, but I have to treat certain spots on the exposed metal because the powder coating flakes off in certain edges of the metal. It’s not a big deal, but I have to watch out for any exposed parts due to saltwater. Otherwise, all parts are solid and operate as they should. The bumper is solid. 🎥
@@CoastalGX thanks for your input. I don’t understand why most aftermarket rear bumpers don’t have high lift jack points. I found yours to be one of the only ones to have an area to lift the car up.
@@graysonatlas may be because they are falling out of popularity. I prefer a bottle jack paired with my recovery boards so it doesn't sink in. Seems safer.
This is what I like seeing man....
Awesome mods
Awesome knowledgeable information
Awesome content
The vibes you share with us are freakin awesome
🙏🏽 thank you Chris. I appreciate the positive feedback. Motivates me to keep going.
Great video and great job from the guys at truck toyz. It take a lot of tools and knowledge on doing stuff like that. I learn every day when it comes to builds on my H3. Take care and stay safe.
I know you appreciate it!! Thanks Mike!
I did all my wiring and can’t imagine filming! Great job!👊🏼👊🏼👏🏼👏🏼
Thanks, Gabe! I appreciate your support, encouragement and motivation. You’re a good friend. 🎥🎬👍🏽
Sounds like a good shop.
Yes, solid and trusted by many in our area.
That black tail looks good on Ol Sandy
I agree, Manuel. The profile lines are getting better. I hope one day to replace the front bumper with a proper bull bar. That would complete the profile.
Saw you out at the island this Saturday with the clean up. Talk about a super pretty day. You were moving on that sand bro. I was doing a solid 30 on the way back from the jetty, you stopped disappeared and 10 min later you were back with me lol.
Were you in a Titan?
@@CoastalGX
Yes sir
@@CoastalGX
That Lexus looked good on the beach…
Love the new look of sandy
Thanks Liam. I hope the storms give us a break this weekend.
@@CoastalGX ya wensday and Thursday were perfect for camping
Great install man!
Thank you!
Primo they did a very good job on it. That bumper looks awesome! 👌
Thanks primo!! It came in handy this weekend.
I was out at the East cut this week.. lmk when you want to go on the boat my invite man u look like u know alot of the good spots.
Brother, my cousin Marco and my buddy AJ are the ones who know their way around. I just shoot the videos and have fun. I will take you up on the invite but I don’t know much lol.
@@CoastalGX all is good. Im sure we can manage.. Which side do you like best spi or port Mansfield?
@@juliandelagarza5926 definitely port Mansfield. I don’t know what it is, but the trout there seem beefier lol.
Great content as always!
Thank you!!! 🎥🎬
Awesome install
Thank you!
Robert really you take care SANDY I like to see people like you that love their vehículo 🚗 and no stop for nothing to do something good for your friend (SANDY)
Robert like always God bless you and your family and friends
Hello Juan, yes I really like this vehicle lol. Take care!
Awesome video! Brother, very informative, good heads up on what u can run into man. What's the weight of that bumper? Did u delete the 3rd row seats?
Thank you! Unfortunately, I didn't weigh it and it didn't come in the instructions. I run the Ironman nitrogen kit with standard springs and it doesn't impact the handling and no squat. I didn't delete the 3rd row cause I have grandkids and a niece and I can always use that extra space lol.
@@CoastalGX it's OK I'm sure I can find specs somewhere lol. You'll save like almost a 100lbs if you remove the 3rd row seats. Yea my kids love those seats too.
Sandy looking hella mean these days.
Thanks brotha! Take care of that precious FJ!
I got a question, what are your thoughts on this bumper after having it for a few months now? i am deciding between this and kaymar for my gx460
The bumper is solid as can be. It looks good to me and it works perfectly. The bad part was after I got stuck in the clay like mud months ago. I thought I had cleaned it thoroughly but the bumper has some deep crevices and I had to really dig in there to get the dried mud out weeks later. The other con was the retaining pin that holds the swingout arms. Just a little sea spray oxidized the pin so I had to marinate it with wd40 for a couple of days until it got freed up again. I added a little grease and it’s perfect now.
When I saw where that camera was going, I was worried that your jerry can wasn't going to fit in the carier with the butt end of the camera sticking through. How messed up are the backup/parking guide lines now?
My 2012 didn’t have the moving lines on the camera. The modified setup now has zero lines.
I bet it hurt you when they were cutting it.!! But the end result was awesome 👏
Yeah brother, there comes a point where you just have to move forward and not turn back. 🎬🎥
Looking back how do you like your bumper today? Do the sensors work ok?
Sensors work, but the front bumper doesn’t have them. So basically I had to deactivate them. The rear bumper is great, but I have to treat certain spots on the exposed metal because the powder coating flakes off in certain edges of the metal. It’s not a big deal, but I have to watch out for any exposed parts due to saltwater. Otherwise, all parts are solid and operate as they should. The bumper is solid. 🎥
@@CoastalGX thanks for your input. I don’t understand why most aftermarket rear bumpers don’t have high lift jack points. I found yours to be one of the only ones to have an area to lift the car up.
@@graysonatlas may be because they are falling out of popularity. I prefer a bottle jack paired with my recovery boards so it doesn't sink in. Seems safer.
Turn me up Robert!
🤣
Very nice video and modification. How much does it cost to install it?
Justin with Truck Toyz can give you a quote. I don’t have his number handy, but it’s on the video.
I need to open a shop……
Do it!!
" chingadera "...........lol. Yup you're in the RGV alright.
"Chingadera"....the thing you find right next to "la madre esa." lol