Bought a Lemon 2018 Ecoboost Mustang and performed this maintenance exactly how you showed, and low and behold the car runs perfect now!! It used to break up and hit fuel shut-off up top, but it's smooth as butter now thx to you!!!
Bro you have no idea how much you're comment helped me fix my car I had the same issue for years and could never figure it out thank you so much bro you're a beauty
One question, did a notification on your gauge cluster pop up saying check fuel fill inlet pop up while the problem was occurring? I just replaced mine and it disappeared as soon as I started it up now just waiting for that check engine light to disappear. I’ve had multiple problems back to back. First it was the purge valve and then this. So hopefully I solved the problem
I have a 2016 Ecoboost premium and my car would not start. my codes are P00C6 and P0627 . I went and changed what you showed in the video. The car is still not starting. Would you please help me here please?
This is the link for the one I used. www.oreillyauto.com/detail/c/motorcraft/fuel---emissions/fuel-injection/efi-pressure-sensor/127d4b0cb6aa/motorcraft-fuel-injector-pressure-sensor/mot0/cm5250
Mark, were you able to get this part and replace it on your mustang? I have a 2017 ford mustang ecoboost premium. The part on the car at the moment is BU5A-9F972-BA The link takes me to the one in the comment here. However instead of BA it says CA at the end. Just wanting to reach out and see if this part fit your vehicle model?
@@rubencedillo4912 many thanks Ruben. I ordered the one with CA at the end. It is the current replacement part and it worked. The car is moving well. I am grateful. Blessed 2023
Bought a Lemon 2018 Ecoboost Mustang and performed this maintenance exactly how you showed, and low and behold the car runs perfect now!! It used to break up and hit fuel shut-off up top, but it's smooth as butter now thx to you!!!
Bro you have no idea how much you're comment helped me fix my car I had the same issue for years and could never figure it out thank you so much bro you're a beauty
Did it used to cut off after u added fuel? If so what fixed it
Thanks for making it so simple, changed mine in about 15 minutes
So excited to replace my fuel pressure sensor in my ecoboost mustang!
Excellent, my friend. Followed your procedure and now I’m good👍🏻👍🏻
Thanks bro this helped from paying $200 lol!
Awesome video, thanks for this.
What’s your fuel rail pressure normally at?
Just tried this was having the same issue repair done but car still rough idle dropping rpms any suggestions
You didn’t tell us unplugging that second peace to prime the fuel lines would be a pain in the ass. That wasn’t good
One question, did a notification on your gauge cluster pop up saying check fuel fill inlet pop up while the problem was occurring? I just replaced mine and it disappeared as soon as I started it up now just waiting for that check engine light to disappear. I’ve had multiple problems back to back. First it was the purge valve and then this. So hopefully I solved the problem
Good info and video
good job👍 , thank you is sharing👍🙏
I’m getting a ruff idle at start up, and when I get gas. I’m charging this tomorrow. And the front too
Hello do have fix it? I have this Problem too
Check your evap purge valve. Super easy fix. Check and see if you have any check engine codes
I have the same problem. did that fix your car? also, what do you mean the front too?
Good video
I’m getting “run power active mode” on my dash 2015 eco boost mustang could this be the problem?
Can someone tell me where the fuel regulator is on the 2014 Ford Mustang V6 3.7?
Is it the same process for a GT?
No bro ecos have a turbo contected to the catch can which gts don’t have, it’s just a problem on the eco boosts
I have a 2016 Ecoboost premium and my car would not start. my codes are P00C6 and P0627 . I went and changed what you showed in the video. The car is still not starting. Would you please help me here please?
Im having the same issue here did u get it fixed?
I was told there are2 sensors I need replace where is the other one located
What is the part called that it screws into?
thanks
Many thanks. What is the exact part number for replacement? I want to get it right. BU5Z-9F972-B ??
This is the link for the one I used. www.oreillyauto.com/detail/c/motorcraft/fuel---emissions/fuel-injection/efi-pressure-sensor/127d4b0cb6aa/motorcraft-fuel-injector-pressure-sensor/mot0/cm5250
Mark, were you able to get this part and replace it on your mustang?
I have a 2017 ford mustang ecoboost premium. The part on the car at the moment is BU5A-9F972-BA
The link takes me to the one in the comment here. However instead of BA it says CA at the end.
Just wanting to reach out and see if this part fit your vehicle model?
@@rubencedillo4912 many thanks Ruben. I ordered the one with CA at the end. It is the current replacement part and it worked. The car is moving well. I am grateful. Blessed 2023
This video tutorial is very helpful. You save me big bucks from going to the dealership.
@@EDGClassics Will this part work for a 2017 Ecoboost?
Bonjour il ya pas de voyant qui ça lume et pas nécessaire de passer la valise merci
Mine will not come off
I was hoping for a reply to my previous comment.
my sensor is stuck won't want to come off lol