what sort of MILEAGE RANGE before this breather system fails: 50, 75, *100*, 150kMi ??? I believe this kit helps prevent blowing the famous "oil cooler seals" when the blow-by gasses have plugged the skinny PCV hoses to intake
wowwww, after looking AND looking and looking finally some one mention a complete kit, many are missing to inform about the one pcv on the drivers side
I want to point out to anyone that is doing this job, the bolt that holds the separator under the separator cover on the passenger side is bolted to the cam with a reverse thread bolt. I figured it out by feel and a light bulb in mind lit when it wouldn’t loosen easily, some things that rotate have a reverse thread bolt. Not sure where this info is published other than a service manual figured it would be helpful
Unfortunately we only replaced the caps on the back of the head and not the hoses on the valve cover. But we'll defnitely suggest it go in the que for the future!
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
Hi there!
I just did it on my E350 . It was a piece of cake ( and two beers)
Cheers!!! Thanks FCP euro.....
Glad to hear it went well!
what sort of MILEAGE RANGE before this breather system fails:
50, 75, *100*, 150kMi ???
I believe this kit helps prevent blowing the famous "oil cooler seals" when the blow-by gasses have plugged the skinny PCV hoses to intake
wowwww, after looking AND looking and looking finally some one mention a complete kit, many are missing to inform about the one pcv on the drivers side
This is for M272 and M273 Engines
hi there Please make a kit and video for the the 4 cylinder M271? or catch can or AOS?? help. thanks
what about the m271evo engine?
I want to point out to anyone that is doing this job, the bolt that holds the separator under the separator cover on the passenger side is bolted to the cam with a reverse thread bolt. I figured it out by feel and a light bulb in mind lit when it wouldn’t loosen easily, some things that rotate have a reverse thread bolt. Not sure where this info is published other than a service manual figured it would be helpful
The vehicle I worked on was a 2010 c300 btw
Is there a video to show how to do the hose replacement
Unfortunately we only replaced the caps on the back of the head and not the hoses on the valve cover. But we'll defnitely suggest it go in the que for the future!
Wish I knew about this before dropping $200 for this repair.
is it normal to have oil in crankcase breather hose?
might be normal nut not to have it wet