How to replace belt tensioner, idler pulley with new belt on 2011 Hyundai sonata || Drive belt broke
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#hyundaibelt #hyundaisonatatensioner #drivebelttensioner #belt #drivebelt #belttensioner #2010hyundaisonata #hyundai #soanta #beltbroke #batterylight #hyundaisonatabatterylight #idler #idlerpulley #pully #drivebeltpully #pully #belttensioner #tensioner
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
Thank you. This is the best video I could find on this procedure. Other vids were showing to remove the side mount and lift the engine to get that idler out. Your way is much simpler
You're welcome!
Man when u got the right tools make shit easier
Yeah well worth the investment
Putting the belt on is the hardest part
This is the best video no need to touch motor mounts very informative and yes 17mm offset wrench must have and at the end put the belt on every pulley and then last one end it at big pulley on very front bottom of car, crank belt tensioner far and it should go right over that last pulley with ease.💪
Yup
Great instructions! Thanks for including the fact that they changed the head size.
Welcome!!!!
Thanks for your video!
I changed my alternator, serpentine belt, and pulleys. Everything was was easy coming off except that dam stripped bolt I was struggling to take off from the pulley. That’s the only fail of TH-cam videos people don’t discuss what to do if there’s a stripped bolt or rust one. I also struggled putting on the serpentine belt two people is definitely needed for that at least for me lol. Overall if it wasn’t for those mishaps I would’ve had my car done quickly but took me two days cause I also was waiting for parts to come in. Yes I am a female that works on my own car😂
Nice well done!!!! Yeah it can some time come in to difficulties or things don’t go smooth but u got it!!! Girl power!!!
Great video again RB , gonna do this repair soon
Very good 👍 bro
I don’t even own a long wrench like that lol 😂
Why you didn’t removed the tire and went thru the side? Way easier that way
For those who wanna do it from top and don’t have lift
excellant video.
Thank u!!
I think the torque spec for any bolt going into the aluminum block on the Hyundais is 16ft lbs, but I'm just going by memory.
True anything on a aluminum block like a tensioner shouldn’t be more than 20ft lbs which is basically barely tighter than a drain plug
Does the idler pulley 3:55 need the belt grooves? Most items online have a smooth pulley like the tensioner pulley. I'm wondering if I order the smooth pulley, can I take off the groove portion on the old idler and put it around the new one...or is it one complete assembly?
No u need same one
Hi,
I have got Hyundai i30 1.4 petrol 2009 model. It is burning lots of fuel. White smoke and raw fuel smell is coming out from exhaust. What it could? Have you got any idea?
First of all i would check your pcv valve first , it must be completely plugged up and about white smoke that can a head gasket issue or maybe not .. Good luck 👍
Do u have any check engine codes? See if there’s any codes and give me the codes
Fuel pressure regulator...
@@MIXMASTERBJB1 what about it?
@@RBTheMechanic common issue with the symptoms described above
Other than the tensioner, how many idler pullies are there?
There are 2 idlers
How did you loosen the bolt on the new part?
I think it’s backward threads not sure if that’s what ur asking
@@RBTheMechanic the bold on the pulley the one unloosed before you put the new part on
@@YCGOTEM oh ok yeah I loosened it normally
That wasn't easy. Man those parts are expensive. Whew.
Yeah the parts are expensive compared to other cars but I don’t think it was too complicated to do
I've got a Hyundai Tucson 2013 bro and in having a hard time putting the belt on 😭 can you make a video on how to put it on like I've got the diagram but it's just the cramped space is hard to put the belt on
Sorry I do have that car video or neither will it come in for a while I have another Hyundai video on belt th-cam.com/video/Lb9iG-t8QKo/w-d-xo.html