ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2024
- Learn how to fix a squeaky tensioner pulley in your car. The serpentine belt in your car powers the accessories such as air conditioning, power steering, the alternator, and waterpump.
Tensioner pulley wear will cause your pulley to squeak. A worn out pulley bearing or a worn spring in the tension pulley can also cause squeaking or a chirp. I show you how to use water to identify what type of squeak problem you have and then how to find the problem. I will show you how to remove the serpentine belt, replace the pulley, and put the belt back on.
Here is a good place to find inexpensive Tensioner pulleys: www.amazon.com/s/ref=as_li_ss_...
Here is a great belt that prevents squeaks: www.amazon.com/s/?_encoding=UT...
Belt Tensioner Tool: amzn.to/1QnbR8b
How to Diagnose a Squeaky Belt: • How to Fix a Squeaky B...
Tensioner Pulley: • Belt Tensioner Pulley,...
Find the Belt Squeak: • How to Fix a Squeaky B...
WD40 to quiet the belt: • How to QUIET a squeaky...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: th-cam.com/users/subscription_c...
-TH-cam Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - ยานยนต์และพาหนะ
![[페이스캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FaceCam) @SBS Inkigayo 240707](http://i.ytimg.com/vi/x9VRNTV4VDI/mqdefault.jpg)
I'm not overly mechanically inclined. I watched your video last night, bought parts this morning (serpentine belt and idler pulley), ultimately took me 23 minutes! Thumbs up and a subscription! Good stuff man.
AWESOME! Glad the video was helpful and you learned something new and saved money!
NoOneFlinches Same I just fixed my 97 f-150 and I was just going to junk it.
Yeah I guy changed my coil and serpentine belt for 235$ most defiantly doing that myself next time! Labor cost sucks haha
You don’t have to be mechanically inclined
Thanks so much for this video. I was able to eventually talk myself into trying this vs getting a mechanic to help me out with this.
I got a quote for 650 bucks to change the serpentine belt and pulley. Smh, I decided to try my hand at this and successfully identified the Idler Tensioner Pulley and changed it in 4 minutes time with a simple, in stock purchase of 26 bucks at Advanced Auto. Turns out my serpentine belt was fine as it only had 5000 miles on it.
It blew my mind that one bad bearing in a Idler Pulley was causing all that noise and performance issue. My 2001 Isuzu Rodeo is running like a dream now.
You've inspired me to look for further improvements to keep my sweet lady of a ride for a long long time. I love this vehicle sooo much. Thanks a million sir! 👊
Chow, after watching your videos on this topic I was able to determine my tensioner pulley was trashed. I tried to purchase a new one from the dealer but they could only sell me the whole pulley assembly with a much smaller pulley attached. I took option B' and took the old pulley to Napa and they were able to cross check the part number with the last four digits of the VIN and match it up with a new pulley of the same dimensions. This saved me a lot of extra cost and time. The pulley measured 102mm in case anyone needs that info. Thanks again for a huge assist!
Thank you for your vids you saved me $600 bucks so far this month. flushed my own radiator, did this and a couple other minor things. again thank you for sharing
Joe W AWESOME! That is great man!
Joe W nnn I 888i*n bbn
l>883 I NJ k
9
do you have any idea how many times i've had my blinker fluid changed for the discounted price of $50 instead of $75 after arguing with the shop? now i can do it all by myself
Same here haha. Thanks
This is by far the best and described, clear video DIY tensioner belt change! I am replacing my a/c compressor, power steering pump, pulley and belt on my '99 Dodge Dakota. Great video!!!
Both my belt and tensioner were completely worn out. The belt even fell off, so my service light lit up and my engine started heating up right away. This video helped me replace them, and my car works again. Thank you!
Great! Glad the video was helpful!!!
Thanks Chris! Just replaced my whole automatic belt tensioner in my 2011 Ranger. No more squeaking! That thing was bouncing around like crazy!
One of the best how to videos I have seen. Takes you step by step and doesnt leave anything out. Thanks for being clear and thorough.
Thanks for this (I have a similar aged Ranger). I found the video about 1 day late. I kept hearing the chirping sound from the front and on a ride yesterday the idley pulley bearing seized and sheared the belt. I pulled over immediately before I boiled the engine. I used this video and the replacement of the serpentine belt video for instructions to fix this today with a minimum of fuss. Many thanks
Wow! You do an excellent job on instructional videos! I just watched this one and the other about the engine squeak and completely understand everything you said! With the right tools, I feel I can go fix the squeak myself, although not sure I could get the belt off by myself. I am probably two to 3 times your age, female and my hands hands have quite a bit of arthritis in them these days but I have done a lot of things under my own hood. Thanks a lot for making such a great easy to understand video that even a gramma like me can use!
Chris, Thought I would mention that it would have helped me had you mentioned that the pulley bolts are reverse threaded. Love your channel, you get right to the point and don't waist my time. you've helped me a lot over the last few years. Keep on truckin my friend.
Thanks!
This guy really knows how to teach you, easy,,some other guys know nothing, I read of a lot of them, n I almost take alternator out..another one said needed 2 ppl...I did it w same old ones,the hard way, almost break my hands,so now I know how to put new ones in..got the parts yesterday
Left handed bolts are usually marked with notches on the corners of the hex. Take a look at a propane gas bottle and you'll have the imagine in your head for future ref
Just changed mine and it went well, thanks so much for all your videos, youve likely saved me 1000s of dollars now.
thank you for this, it's helping me with my Mazda3 right now. that pulley's bearing had its plastic cover explode off of it last night, and this is helping me fix it by replacing it. Thanks again!
1. Chris, nice vid.
2. If pulley is expensive for your model, you can replace just the bearing.
3. The other pulleys are grooved. Be sure when putting belt back on that it is in the right grooves.
Exactly the same issues with my 04 ranger! Thanks, Chris!
Bro i googled this and started it and i was like is this Chris Fix! Yeah buddy. I'm glad you make quality videos.
I’m so glad I subscribed. Your videos are awesome! Every time I need help I always come to your videos . Looking forward to see more 🤘🏼
You seem real comfortable under the hood. It's a hell of a video, thank you.
I like the way you present the job in the video. Very easy to understand and you zoomed the camera correctly. I appreciate what you have shown. Thank you.
This video saved me over $700. Thanks a lot.
thank you so much Chris, I love your videos! easy, professional and to the point.
Replaced my belt tensioner after watching this and saved some money which I don't have, thank you
ChrisFix's system of explaining and teaching car mechanics is the best on youtube.
I was stuck. Then I saw this video. Now my truck is fixed. Thanks you saved me time and money.
Your videos are the best man!!…Extremely helpful and very acurate. Always right to the point…. with clear presentations!!
Thanks for taking the time to teach my friend!!
Thanks a lot Joe!
Great video. It's simple, clear, and concise. Keep up the good work!
Thanks! Glad it was helpful (and simple, clear and concise). That is my goal!
Dorman Products makes an "Anti-Slip Shield" for the tensioner pulley it also fits on the idler pulley. The Dorman part number is 82570 available at most parts stores for about $6-$8 . The shield comes with a replacement bolt which is slightly longer than the originals used to compensate for the thickness of the shield. To install loosen the tension on the belt then, unbolt the pulley discard the OEM bolt. Next insert the new bolt through the shield, through the pulley then tighten. Once in place flex the tensioner then slide the belt in place. I use the shield on both pulleys and the problem of the belt slipping off is eliminated.
Another great video straight down the middle. Thanks
I may not be doing exactly the same thing on my truck as what you are doing here but I always learn something useful from your vids. Thanks!
EtZ ty y t👨🏽🍳
You truly are the best you make this stuff looks so easy and you save us so much money thank you for all that you do😁
Thanks. Your videos are always easy to understand and straight to the point!
+Doug Strebeck no problem! Glad the videos are helpful!
You, my friend are a GREAT MECHANIC, Amazing work/videoes, you produce!! ty, for all your time and effort.
great video, definitely didn't think it would be so easy. thanks
Great video. Makes a lot of sense and well explained. Seems simple enough. Thanks.
THANKS!, Straight and to the point, efficient!
Thanks Bud. Be knocking it out tomorrow!
Nicely done video, could see and understand everything!
Buying the right tool for the job will save you time messing about by having to remove the wheel . I remember my last mechanic years ago taking my wheel off because he didn't have the correct tool and struggled with a rachet trying to get in there
My belt snapped last week , got the breakdown out and he got me home, said I'd need a new tensioner and belt obviously, watched this and bought the tool. Took a lady like myself just over 30 mins to do
Thanks for the video
Saved me a few pennies at the garage 🤌
Very cool Chris, and very well explained. Thank you.
Thank you so much for this. Your videos are the absolute best!
hey nice ur videos are easy to follow and understand thanks
Great Video as always,
These are great trucks still running strong.
I recently bought a 1999 ranger xlt with the 3.0
It has 199000 miles and I ran into the same problem with the idler pulley squeaking,
So I removed it it is the original, I cleaned the bearing removed the seal on both sides and repack it with high temp grease, put it back on and is nice and quiet.
I have a replacement on order but we'll see how long this fix last.
I thought I share this mod as a temporary fix while waiting for a replacement.
Cheers..
well made video and I appreciate the time you took. I talked a car salesman down 2k on the asking price for a 2008 Frontier because of the belt squeak. the mechanic said 150 and its looking like I'll be doing it for 60 and project time with my girl lol!
+Ian Moone Awesome! Nice work!
Thanks Chris! You're my go-to for fixing stuff on my truck
+Matthew Serna no problem Matt!
On the Chevy 3.5 V6 is counterclockwise to take the tension off the serpentine belt Chris. You may want to add depending on your vehicle it may be clockwise or counterclockwise.
Peter Dudek It sounds like it has something to do with either the tensioner spring, the belt, or the power steering pump. Is the belt new? It could have stretched out over time. The tensioner spring could be worn out so the belt isnt tightly against the pulleys. Or the power steering pump is not functioning correctly and the belt slips over it. I would try the water trick and let me know what happens: How to fix a squeaky belt (figure out where the squeak is coming from)
Thank you so much for your videos
Very well done video! I will need to do this on a 2014 Cadillac Seville.
Amazing video thanks for the help
Thanks for the video good job buddy smazing how we learn from youtube
No problem! I am glad the video taught you something new!
Dude you're awesome!!
My car has been making that sound for about the past year and I finally fixed it!!
AWESOME! Glad the video helped and you found your problem!!!
ChrisFix Glad that you posted this Video :)
Thanks bro, this really helps!
@ChrisFix YOU are the MAN,,,always come thrw when i have a question/problem with my car
+Daniel Briceno Thanks a lot Daniel!
Hi Chris, I have a Ford too and although I don't like doing it, I know how, and will save my self a little money. But will be replacing the alt. Thanks for the video.
Thank you for the video ❤
Thank u so much Chrisfix I love it u job you have very very good vídeos god bless you bro Chrisfix
Thanks for upload this. I did it too by the directions.It was so helpful.
Great! Glad the video was helpful! Give the video a thumbs up (it helps me out, thanks!)... Also subscribe for more helpful videos!
Chris thanks for the video. Very informative and well done. Keep them coming.
Thanks! Will do!
Great job bro, Thanks!
Thank you for the excellent video
I wish I had watched your videos. It might have saved me a mjor part of $1500 repair bill
My AC quit working recently ( not a problem per se, because I rarely turn it ON), and shortly there after, there was a constant noise from the A/C compressor area.
A mechanic at the dealership said the"noise" was from the compressor pully and the compressor was "shot"; which I expected.
They did not have a new( its a 10 + year old Subaru Forester, so it would probably have been a RMF compressor , I think)Compressor in stock so they would "order" one in. In the mean time he said I could frive the vehicle for shorter periods( like 20 km at a time, he said)
The next day my serpentine belt poped and could not drive the vehicle.They replaced the compressor and belt for $1500 !
The same dealership mechanic said the AC compressor caused the serpentine belt to break
Is their explanation credible in your humble opinion
Thank you
Mine just broke so thank you for this Chris
Chris fix ...Awesome👍👍👍
MAN ILL TELL YA, YOU JUST SAVED.ME. RIGHT ON!!!!
Thanx buddy you helped me to find the problem in my car I been putting many stuff on my belt thinking that was the issue and even with the new belt was the same thanx again champ
No prob! Glad it was helpful! Give the video a thumbs up if you havent already (it helps me out). Thanks!
Thanks for the video! I have a question: my pulley is bend, it doesnt squeek too much but i dont know if I have to change just the pulley or the tensioner?....because the belt gets off once in a while and now more often, it dont look like the belt is jumping but the pulley dont look straight either...
Having a ford ranger 3 litre makes this video much more informative. Wish I had smaller hands though! This was so damn hard to do.
Thanks this helped a lot
Your videos are so good, almost perfect, if only you owned a 2006 Ford Focus Zetec (my car) then it would be perfect ;)
Thank You very much very helpful. Love your channel..... God blessings to you . 😁😄🤗🤗👍🙏
Good job!
I thought your presentation was just right. thanks.
Great video thank you!
I had that same exact squeaking noise on my 98 ford ranger v6 3.0. I changed the idler pulley after the water trick the squeak came back. Next thing to change the belt tensioner pulley and the squeak was still there. All the pulleys were all in line and the belt didn't not move back and forth as shown in the video. Replaced the belt and it still squeaked. So finally I replaced the belt tensioner assembly. The old belt belt tensioner assembly pin on the back was broken therefore causing the belt to have less tension on it. After I installed the belt tensioner pulley assembly no more squeaking irritating noise.
gmb63 0
I had one where the harmonic balancer rubber was shrunk and the inner and outer parts were slipping. I found it when I tried to set the timing and saw that my old marks were way off.
How do you get the assembly off?
I looked up the tensioner for the Ranger.. it's P/N 89233 Dayco. Of course, there are other brands. Google a picture of it and you will see that its held on with only one bolt. I think you should be able to find a video to do the rest.
My 2007 Ranger started squeaking this past winter. Cleaned out my garage and started parking in the garage and it quit.
thank you very much for posting this. was very helpful
+Taylor Kelley I am glad the video was helpful!
Thanks, Chris!
Well done video, very helpful and to the point!
No problem! I am glad it was helpful and concise!
My noise is very similar but seems more aggressive. It even synced up with yours!!! 94 f150 straight 6
How about making a video on removal / installation of the belt tensioner assembly on the Ford Ranger 3.0. your video's are very informative.
You speak and explain very well. Thanks
+Harold Smith Thanks Harold!
Thanks Chris
Your video was so helpful for me on this morning G.B.Y
cool thank you for that information very helpful !
Thankyou I am sure it didn't need to be loose , to put the belt over so I like your update
Chris.. My local parts shop has great 30 to 40 percent discounts for internet orders pick up in store. That said, vid is great.
I always replace the idler at the same time.. I found that if one is worn the other is right behind it. I love how many shops sell power steering pumps for bad pulleys..Keep the DIY's coming.
Davis Gunner Thanks Davis. Glad you liked the video! New videos every Thursday and a bonus video most Mondays so stay tuned!
This is great. Thanks!
I check the belt like a you said. Get a new one problem solve thanks bro you video help a lot of people very informative. You have a new subscribe lucky I got the same truck you have.
Thanks and great! Glad the video helped and glad you are a subscriber now!
Thanks, Great video! Very helpful to me.
Great! Glad the video was helpful! Remember to give the video a "thumbs up (it helps me out, thanks)!
Thanks !!! It really help m...no more noise...
Jayson Castillo AWESOME! That is what I like to hear!
Mine just came off my car. How did you learn so much about cars man.
Good vid man.
Thanks!
Would you mind doing a video on how to remove the actual tensioner?
God Bless you!!!
@@jasontindell6734 It's actually quite simple. I figured it out that same day minutes after posting this comment lol
It’s has like three or 4 bolts to remove same size it’s pretty easy
@@joshuatovar6298 yeah i feel that - sometimes things seem complicated but you dig around and find the right bolts
Thanks Chris! Good stuff
Frank Minyon No problem Frank! Glad the video was helpful!
this was a great easy to follow step by step video. I feel good about doing this job on my own after watching this video.
Thank You
+Duane Duncan Awesome! Let me know how it goes!
I got the job done, however the video did not explain that on belt had to go behind another. also did not talk about the adjusting screw. thanks
Hi chrisfix
I did change the tensioner and the drive belt. There is no chirping now.
But it started ticking sound on engine. Any ideas
DUDE! You're awesome! thank you
Yeeleng Lor Thanks! I am glad the video was helpful! Definitely consider subscribing! New automotive "how to" videos every Thursday and most Mondays!
thanks chris fix for that good tip
+Richard Moreno no problem!
these videos are as handy as a shirt pocket .i own a hole libary of motor manuals and never have the right one thanks.
Great! Glad the videos are helpful!!
Thanks for the video !
Harold Price No problem! Glad the video was helpful!
Brilliant thanks bro
a shop by my house wants to charge 100$ for labor (1 hour) to change my belt tensioner for my benz, and 100$ for the part.
So i went to amazon bought the part for 50$ (belt tensioner specific to my car model) and saw your video, and 150$ saved.
Thanks a lot man subbed and liked
+charlie c Awesome! Glad I could help!
I am having this problem with my saturn sl1. The belt squeaks but insanely loud when I turn on the ac and have it in drive. I know it's not the belt because I had that replaced thinking it was the problem. You made this look very easy and I am thinking of taking a crack at it. Firestone wants 250 to fix it... Lil outrageous. Thanks for the vid and helping others in these situations.
Yea, it might be the tensioner itself (the spring part, not just the pulley). You might want to try this:
(click) How to QUIET a squeaky belt