How to build custom CADIO info file (ESP8266 - ESP32) | CADIO Home Automation
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- CADIO Website:
egycad.com/cadio/
CADIO Downloads Center:
egycad.com/cadio/downloads/
CADIO Developers Docs:
egycad.com/cadio/docs/discove...
CADIO Firmware For ESP8266:
egycad.com/cadio/docs/firmwar...
CADIO Firmware For ESP32:
egycad.com/cadio/docs/firmwar...
---------------------------------------------------------------
After installing CADIO firmware on the ESP , the ESP will create a WIFI network, for receiving the info file and configurations.
We can open CADIO app and go to the configuration section, and connect the phone to the ESP WIFI network. In seconds, the connection will establish and the info file page will appear.
Info file page will create the info file based on our preferences, and all codes will be internally created with the power of AI.
The Info file is created only once, and cannot be edited unless the firmware is erased and re-installed.
In this video, we will explain the info file creation interface, so we can make our custom info files for our projects.
The first option in the info file is the config access point name, and here we can set the ESP configuration WIFI network SSID, so the configuration network SSID can be anything instead of CADIO.
In switches mode we can select if the switches are normal switches, or press switches like pushbuttons, or 3-way switches.
From switches handling we can set the priority of handling switches signals, if we select interrupts, the maximum priority is given, but if you are dealing with massive AC noises, you may need to try pooling method.
we can select the switches wiring, there are two types: pullup, which means that the switch is between the GPIO and GND, and a pullup resistor is between the GPIO and VCC, the other type is pulldown, which means that the switch is between the GPIO and VCC, and a pulldown resistor is between the GPIO and GND.
from relays mode we can set the output ON level, HIGH or LOW.
software serial is used to connect another MCU to the ESP, using CADIO serial Arduino library.
and 433 megahertz feature allows controlling the devices using RF remote, and adding the support of wireless sensors.
In protection, we can set the max safe temperature for the unit, and use a NTC sensor to manage the protection.
The config button is a simple pushbutton, all units must have a config button, holding the config button for 3 seconds will activate the configuration mode, while holding it for 10 seconds will perform a factory reset, and a click on it will fire a fast restart.
The indicator LEDs tell us about the unit status, active mode, and connection status, they are vey important, please use them, they will help you someday!
in devices table, we can add up to 21 device for any unit, we can select the device type, and select it's GPIOs, for example, I will add an on off device, and select GPIO 4 for it, and GPIO 5 for it's switch, another device is a sensor on GPIO 12, and a DHT on GPIO 13 for example, that is how we can set our unit devices.
after setting our unit info, the info file will be created and all codes will be internally generated with AI, after info file saved, the configuration page will appear, here we enter our home router WIFI network details, and the unit will connect it, and connect to the internet, and now our unit is ready to use.
In all next videos, I will share a screenshot of the info file settings for the unit I use in the video, so you can clone my unit settings and try it yourself.
a lot of projects will be filmed soon, if you are interested, subscribe to our channel, and feel free to try CADIO, and feel free to contact us. - วิทยาศาสตร์และเทคโนโลยี
can u make a video on how to connect two esp's
Can i use stm32F1 as a serial software and program it with arduino IDE ?
Can you make a video abut how to add extra gpios with Arduino nano?
We are waiting for video tutorial about "SOFTWARE SERIAL" Functions....................
Can it be installed for esp 32 s2 mini?
The trial version allows only one shutter event on the configuration. Does the paid version allow more that one shutter event? For example need to operate four relays instead of two.
The only difference between the trial License and the permanent license, is that the trial License is valid for 500 operating hours, while the permanent license is valid permanently.
@@cadioHomeAutomation Will the trial version allow two shutter devices?
Please add Bluetooth feature in it.
Can we connect solid State Relay in this project 🤔
Yes of course
Sir your vedio is amazing but dealy to upload vedios😢
I'm flashed the firmware and do the project.after I want to edit the configuration so I flashed again my esp8266 but it saved my first project configuration.
So I flashed again and again but first project is saved in the board so I can't write new configuration for it.can you help me?
You need to ERASE the firmware first!
from the esp flash download tool, just use the ERASE button, just like in this video:
th-cam.com/video/kMnF9vqDa1k/w-d-xo.html
@@cadioHomeAutomation thank you 👍
@@UNIVERSALEARTH-et8bsdid you get solution?
Sir normal ir remote to on off appliance possible yes ya no
IR remote controllers feature in now supported!
th-cam.com/video/TCRG25qMikc/w-d-xo.html
I upload the program and configure it but my device does not appear in the app?
It find my router and connect to it,I can Confirm this when WIFI LED Indicator Turn on,Can U Please Help ME?
What about the cloud led?
@@cadioHomeAutomation No it does not turn on On ESP32 I PUT it on pin 12 active high but it does not turn on
Kindly check your router setting and make sure it's not filtered by the router.
How to reset flash if you forgot the wifi name and password you input
Hold the config button for 3 seconds,then the unit will activate the config mode, then simply edit the wifi ssid and password
@@cadioHomeAutomation thank you so much, I hope that your system receive a lot of funding, best of luck!
Hi are u providing any OEM services??
No sir, we are providing software.
Hi … can you provide software to launch our own brand name ???
@@cadioHomeAutomation 👋
@@cadioHomeAutomation can you provide software for launch our own home automation application
Info file second time how change
Erase then re-install the firmware
bro it is not showing wifi of nodemcu how to get that
Install CADIO firmware just as described in this video
th-cam.com/video/kMnF9vqDa1k/w-d-xo.html
How to reset configer
To change the router wifi network details, hold the config button for 3 seconds and then the unit will enter the config mode.
If you mean editing the info file, the info file can't be edited, to create a new info file you need to erase then re-install the firmware.
do you have a discord channel?
If so, please leave your address.
Soon