Your simulation looks good and shows what you can do with three wires, very good, I have gone to your website to look and see who you are and where you are based but could not find any details about your company?
Plz can I use this to control everything thing in my workshops. Like on my dust collector, off my dust collector, on table saw and off table saw, on fan and set to desired speed based on temperature differences in Tue room. Amd Shut down the whole building power source after with a voice command and also. Based on a specific time boot on the power supply.
When I try to add Cadio in Google assistant, it returns with the following error while entering login credentials: "Could not reach Cadio. Please try again". What's the solution to this issue?
Connect the motor two wires to the two relays COM. Then connect the motor dc power source like this: 1st relay NO -> (+) 1st relay NC -> (-) 2nd relay NO -> (+) 2nd relay NC -> (-)
I was following the video to apply Cadio on esp32, erase and upload binary files exactly as shown. I configured esp32 (relay board) to connect to my router with credentials successfully but the widgets do not appear on the phone although it has got IP address and is connected to internet. My phone and esp32 are in the same subnet. Tried many times but no success. I checked on serial debug. It says "E (22) SPIFFS: mount failed, -10025" when I press reset button. Does that give a clue as to what is wrong? Help please.
This problem is offen on the phone side, try remove the network using "forget" option, then reconnect to it again. try another phone if available. feel free to email us a screenshots or a videos describe the problem clearly and we will do our best to help cadio@egycad.com
Sometimes it called shutter switch, up-down switch, double pushbuttons, curtain switch. It's simply two pushbuttons! This is the link I got it from: www.amazon.eg/dp/B0BFC5NYD8?ref_=cm_sw_r_apann_dp_S8ET1NGNHFNN8KJR2J88
Please my question is when power goes OFF and comes back ON some time the esp does not connect back to the wifi ( I do wifi reset in my code to solve this problem) so how do we solve this issues with Cadio
The more I watch the more awesome this things look ,God bless developer of Cadio ,i just love it
Please extend your supported device types.......like analog sensors, OLED displays....it would be a game changer
Awesome the best HA on the market, keep up the good work
sir can i use stepper driver motor like nema17 motor for this project? using L298N Motor Driver ?
your project is very cool. Friend, can you make a video on how to add an RF433 control to this project?
How about controlling an Hbridge circuit. since it is used in many gate automation systems.
Your simulation looks good and shows what you can do with three wires, very good, I have gone to your website to look and see who you are and where you are based but could not find any details about your company?
Plz can I use this to control everything thing in my workshops. Like on my dust collector, off my dust collector, on table saw and off table saw, on fan and set to desired speed based on temperature differences in Tue room. Amd Shut down the whole building power source after with a voice command and also. Based on a specific time boot on the power supply.
any video you recommand to make this 3 wires motor
legal muito bom seu projeto. amigo tem como fazer um video de como adicionar um controle rf433 para esse projeto
Do you have the design and parts for the linear actuator
When I try to add Cadio in Google assistant, it returns with the following error while entering login credentials: "Could not reach Cadio. Please try again". What's the solution to this issue?
Which motor you used....
Hi do you still exist ? have not seen any update for over a year now.....
I m using dc motor, it has only 2 wires, positive and negative. Please advice where did the 3rd wire come from?
Connect the motor two wires to the two relays COM.
Then connect the motor dc power source like this:
1st relay NO -> (+)
1st relay NC -> (-)
2nd relay NO -> (+)
2nd relay NC -> (-)
Suggestion:Add safety features like lift door (elevator door)
Thank you sooooo much you are the best
How to enter file device info after configuration
Can we use a servo motor for opening and closing doors in this specific case?
You can use two directions motors
And what about patient health monitoring system
I was following the video to apply Cadio on esp32, erase and upload binary files exactly as shown. I configured esp32 (relay board) to connect to my router with credentials successfully but the widgets do not appear on the phone although it has got IP address and is connected to internet. My phone and esp32 are in the same subnet. Tried many times but no success. I checked on serial debug. It says "E (22) SPIFFS: mount failed, -10025" when I press reset button. Does that give a clue as to what is wrong? Help please.
Kindly check the esp flash download tool setting.
How to control rolling shutter door with it
Because it has inching type switchs
Up and down NO
or stop is nc
Slider not work with it
I think with the two relays you can control it!
Is it compitable with home assistant ?
Unfortunately not supported yet!
@@cadioHomeAutomation It is very important that this is compitable with HA in future
After uploading code to the esp32 the Wi-Fi does not connecting to obtaining IP address and saved are showing
This problem is offen on the phone side, try remove the network using "forget" option, then reconnect to it again. try another phone if available. feel free to email us a screenshots or a videos describe the problem clearly and we will do our best to help
cadio@egycad.com
is it possible to control more relays using pcf8574 in 1 esp32
Unfortunately not supported yet!
can we control using alexa
Is Cadio compatible with Wemos D1 microcontroller?
Yes, CADIO firmware can be installed on any ESP with at least 2MB flash size.
@@cadioHomeAutomation should I use the 2MB or 4MB flash size for Wemos D1?
@@johnpatrickobra5405 4MB
CADIO applications should add the ability to add devices without re-initializing the program
How to know how much power my appliances consumed
DATA devices using CadioSerial library
How can I use esp32 fan speed control mannual and also in App also rf remote
Is it possible using cadio platform
th-cam.com/video/HcYCt668MMo/w-d-xo.html
Do we need to pay for every unit or one time payment can be used for many units?
Every unit should have it's own license
@@cadioHomeAutomation does that means if i am have 4 esp units in my home. I will have to buy license 4 times?
What is the name of the shutter switch. If you can share the link?
Sometimes it called shutter switch, up-down switch, double pushbuttons, curtain switch.
It's simply two pushbuttons!
This is the link I got it from:
www.amazon.eg/dp/B0BFC5NYD8?ref_=cm_sw_r_apann_dp_S8ET1NGNHFNN8KJR2J88
After configuration of esp32 the devices doesn't visible on dashboard
Click on the unit name to show/hide the unit devices
@@cadioHomeAutomation how to do
Can I get a gsm call project
If im flahed my paid cadio firmware how can i get my lisens to new esp
egycad.com/cadio/docs/pricing/
@@cadioHomeAutomation is this valid for broken or flash default firmware to esp. so can I change my lisens to another one
Please what should we do if esp32 fail to connect to the wifi
To edit wifi ssid or password, hold the config button for 3 seconds, and enter the new wifi details in the configuration
Please my question is when power goes OFF and comes back ON some time the esp does not connect back to the wifi ( I do wifi reset in my code to solve this problem) so how do we solve this issues with Cadio
Is it possible to connect 2 or more esp in same time in cadio?
Yes, you can connect an unlimited number of units at the same time
Hello how can we add multiple shutters
Shutter, ir, dht can be added once per unit
@@cadioHomeAutomation i need it for my 4 covers one point access :(
How do I link Alexa with cadio
Cadio is not available in Alexa
Please make sure language is English
Esp8266 connect sim module for internet possible
Not supported!
How to measure tank water level using ultra sonic sensor
Unfortunately not supported yet!
Please which device is fix in the middle
Kindly can you clarify your query further please sir
@@cadioHomeAutomation the white thing moving in the middle
Just 3d printed part to simulate the linear mechanism
@@cadioHomeAutomation okay thanks
is it possible to set the context
Excuse me sir, can you explain more...
Hi please how is the mechanism mode
Kindly can you clarify your query further sir
I mean the curtain motor did you fix the motor and the track your self or you bought it from store
@@smartteg7381 yes, I made it with some old stuff in my workshop to simulate the mechanism
@@cadioHomeAutomation you will have to teach as please
Sir plz make a video how to connect 2 or more esp in cadio
OK I will, by the way it's too simple just repeat what you did in the first esp!
How can i contact u, for some business related queries?
cadio@egycad.com
❣️❣️❣️❣️❣️❣️❣️
Show
I cannot find CADIO in Amazon Alexa skill in Indian version
Please make sure language is English
Sir controal fan speed
th-cam.com/video/HcYCt668MMo/w-d-xo.html
Such a neat little project wasted on a closed source walled garden app, my disappointment is immeasurable and my day is ruined
Please make this app free for people