I have been following your teachings for some months now and I believe I'm learning a lot, thanks so much for this kindness, here our PC are always messed up at the workshops here because of no good knowledge of how these components works, you are really a great man honestly, May God bless you more with great knowledge and good health 🙏
Great video, saved my PC from the scrap heap. The initial issue arose from a water spill on the keyboard. The symptom was an error code of 3 long and 2 short flashes on the Caps Lock key. Using your alcohol (91%) and toothbrush technique, I scrubbed the solder traces on the SSD, RAM, and several other areas (not sure what their function is). I also removed the RAM boards and wiped off the contacts both on the chip and in the sockets. Powered up and it worked! Although with the naked eye there were no bridges, there must have been some subtle fouling of either the solder traces or contact points. Thanks for sharing your expertise.
I swear I had spilled wine from underneath and it wasn't turning on. I did this exact thing and cleaned the circuit panel and operated pins with a toothbrush and alcohol. Then blow dried it and it fired up and charged. I used to make circuit panels and do the soldering/gold plating so I was familiar with it somewhat. Thank you so much 🙏
Hi, I'm Andrei, I really appreciate the work you do. Wish you could make a video to explain more how you can use a multimeter, how you can check a lot on a laptop. In a few days I have lessons from the videos. Thanks
Maybe the sio pins that got the water may have been some of the keyboard connections. That could short circuit the keyboard and power button if it was part of the keyboard.
Thank you so much for this. I spilled some juice on my laptop and I was so upset thinking I would have to pay stupid money to repair it or buy another one but, thanks to this video I was able to quickly unscrew the back and wipe up the liquid and it's good to go again. 🎉
@@belkdionne3154 most likely it should, when I unscrewed the back, I also had to unscrew a few small pieces to get in between the small spaces the juice spilled into, so make sure to take a picture before just in case you have to unscrew anything in the back so you don't lose track of where to screw everything back in place.
Thanks for this video. The same this happened to the one I have (HP Laptop,14-dq2078wm). Please tell me what you used to clean off the sticky residue from the liquid spill?
I would like to take A second to Thankyou for saving my laptop!! My 5 year old spilled her juice on the table and my laptop soaked it up, I instantly looked up what to do and I found your video and now it’s back on and running! Thank god for alcohol and TH-cam!😂😂
Sir i have same laptop with water damage. I cleaned everything but the issue is laptop is not turning on. It is charging upon connecting charger showing orange light near to charging port but when i press power on button power light blinks only on the right. Fans are also not spining what could be the issue?
i enjoy watching your videos and uave been learning a lot, yes in africa we have limited resources even buying inline it takes time but i have been learning a lot, Now can you please explain how differentiate testing using usb power meter when you have shorted board and when you have low battery not charging, because both situations you talk about rising current then it goes to zero
I have an HP laptop and it was working fine, but after I installed the touchpad, the laptop did not turn on, only a flash of light, and after I removed the touchpad, it turned on without a picture with the battery, but with the charger, you can see the HP logo without the background light (it stays on the logo) What could be the problem . I have been following you for a long time, thanks for all the information sir.
really appreciate your videos, I have the same water damage with 14s FQ0029 au with scaling on ribbon cables, I have cleaned what I can see, cleaned the super IU was like yours, now I have a light at the power port, 3 volts at the power on board, and battery now charging at 12volts, but not turning on, the power button light gives a faint flick while the light next to it flashes brightly after pressing the power button, any ideas guys?
@@Zuleikha101 yes blank screen, the charge light works Now after the clean as per your advice / video, but nothing on the screen, it charges the battery now
What about if it's FECAL water? There was an accident in my apartment building and sewage water burst out and went into a few units, one being mine where I had left a laptop on the kitchen floor. So, it wasn't just "liquid," but nasty liquid and it was almost totally covered by it. Thank you if you or anyone responds.
I have a hp laptop, got real wet with water while on. After standing on its side for a week to try to drain it, wont respond to anything, wont turn on. thanks
mr sorin please do a video on lenovo ideapad 300 series orange light blinking, i got a one, charging port fine, main power rail presents, 3.3v on power switch presents, io got it's power but not turning on
I spill water on my keyboard and I did not put it upside down but just waiped and turn on the device then turn off but after that some buttons not work anymore is there any solution for get them work again???. 😢😢😢😢😢
I have a HP revolve 810, its charging light is blinking orange and white light when I plug it to the charger but its not turning on, what could be the problem?
about more than month i faced same problem in super i/o the laptop stop start up from battery and i have to disconnect battery every time my laptop lenovo ideapad 320 the drop of water come from keyboard side
Hello sir, hope you are doing good. Sir my child poured a cup of water on my hp laptop 12th generation corei 3 previously it was on and keyboard were working but touch mouse wasn’t working then next day i try to on but it is just show white light once when i press power button but not working
I have been following your channel for some time, I wanted to know the address of the store you work there, in order to send a product for repair from another country. I would appreciate an answer from you or one of the followers. Thank you
Hi Sir, I have kind of similar laptop hp 14s dr-1009tu having an issue with it, it just heats up uncertainly and it's gets down, power light and charging light remains on but ssd light stops blinking... after this only option I left with is force shutdown. Can you please help and suggest me something.
My laptop in a new one.its a Ux325ea.it was removed due to ticking sound from the fan. The battery port was removed and fixed again as it was before.But the laptop doesnt turn on and even i if i plugged it to the charger it doesnt turn on the charging light too.Can i please know a reason for this issue😢😢
Pls help me, i spilled tea on my hp laptop, surprisingly its working fine but my keyboard keys aren't working. Is there any fix? (My keyboard is non detachable just like the one shown in this vid)
Do you know how to a fix a hp laptop 14-fq0xxx from a restart loop from updating. I tried pressing the X, windows, and power buttons and it hasn't done anything. plus it keeps telling me that im 35% percent every hour. please help.
I have been following your programs it's good to me,course l want to be like you.l have a problem with gigabyte laptop that is failing to boot the old windows or from the cd l try to reset bios but l don't know how to reset time now.model number is Q1580V,Please help me.
I have an Asus laptop 55A model It was working fine but went off when I inserted a PC pad into a regular usb port I was using my mouse in it (just finished working on Archicad and decided to play PES), it instantly went off, and went into no power no charging.. at first I thought it was the pad but am still using the pad till now on another PC and it is working fine, so my confusion is what could really be the cause of the short on the PC ? And hence know a way out, I have tried removing RAMS to see if BIOS went back together with HDD but still no response
@@user-te1le7ck6b I believe it is shorted Because immediately I plugged the PC game pad the device went off, but funny enough the pad had been confirmed good and still functioning properly
Sir, my laptop was waterdamaged. During the service its ic changed including audio, keyboard and also to c port connected ic. But currently im facing display issue. After shut down the next day it display not working. During the service it have no problem. Its third time iam facing the same issue. Do you know the reason Laptop model- hp 15s windows 11
Hi. I spilled ice tea on my computer. I immediately disassembled it completely and left it to dry. I then reassembled it and ran it. It worked that day. After 1-2 days, I tried to run it again, it doesn't work. The light turns on when charging. But it won't open. Where should I look to disassemble it again?
Thank you, sir, for the useful information. I hope to be friends with everyone. I have the honor to have your interest. I am a beginner from Morocco. Hello
Shut the front door. That simple? The difference between knowing what you're doing and a novice opening it and taking a peek lol i have a faulty motherboard here, I couldn't find obvious fault, no burn / popped items .. diagnosis was the motherboard due to residue streaks. I replaced the motherboard, boom, was like new. The motherboard i still possess, just pulled it out of a box. They have a pet hamster, I've seen it sitting on the top of his daughters pc, there's a vent / mesh on top, my guess was it peed on the pc an some fluid made its way on most likely while the pc was running. I decided id like to know how to diagnose and repair it. Its a good gaming board.
I have a three year old Overpowered OP-LP3 Laptop. Recently the glue holding the display on failed and the display tilted down applying pressure to the connector. Not wanting to work on it myself I brought it to a shop that reinserted the connector but the display would not light up. The repairman opened up the computer and found burnt components on the motherboard. Problem is we can't find a schematic for this machine in order to identify the failed parts. Do you have any idea with to find a schematic for this Overpowered OP-LP3 Laptop? Andy advise would be greatly appreciated. It's a beautiful machine and I really need to get it working. Thank you in advance.
Hey again we miss you its been longue time you didnt post a video, welcom again, need all your vidos succesed and failed repair :) i have asus gl504 with weird problem, the keyboard and lighting does'nt work, the keyboard flex is clean and in good condition, what will cause this problem?! Tried remove and replace keyboard, update and downgrade bios firmware, model gl504gm 314 and 313 version the keyboard doesnt work except power button, also i have problem, the serial number is not shown on bios menu, could you sell dump bios for that model with it own serial number from doner board?
thanks Sorin , in france similar screw driver is about 180 €. but with torque control ..very good videos as always , holidays never for you ? it is very bad to design a good computer and don't think of usage in normal life , when going outside in the rain you always think to protect the keyboard , and turn it upside down ...and here it kills the thing , bad design from HP , luckily they don't make phones nor printers , sorry they make expensive cartridges...HP is a bad company since profit margins have to go high to please investors ...hope they survive after complete management to be a clean green company !!
Buonasera, sono Italiano, ho un portatile ASUS FX505GD con dei problemi, lo schermo nero, la tastiera è illuminata ma non parte, questo, penso che sia stato la conseguenza della condensa che si è venuta a formarsi nel portatile, dato l'eccessivo caldo dei giorni scorsi avevo riscontrato un eccessivo riscaldamento del cpu e gpu e avevo usato un sistema di raffreddamento pielter da me autocostruito, la cosa ha funzionato sono riuscito a abbassare di molto i gradi, però è successo che con la condensa che si creava pare che si sia rovinato il portatile che ora è in assistenza speriamo che si possa aggiustare. Quello che le chiedo, sempre se è possibile, se c'è una soluzione per la condensa creata dai pielter, come si possa eliminare dando sempre la quantità di gradi in meno. Grazie anticipatamente per la risposta la seguo molto per la sua grande professionalità e il suo condividere le sue esperienze, Grazie infinite
Sorin if you have a power supply you aren't using please give me🤣😂🤧🤧🤧 I'm a young technician from Zambia-Africa who has been greatly inspired by your works for a long time now
Nothing is free and nobody give anything for free. Better start thinking and u will find/make one. Get power supply board from scrap DVD device or video recorder, or TV. On that power supply you have 3.3V, 5V, 12V, 24V... then u can use voltage divider (potentiometer) to adjust to other voltages. And dont forget to limit current ;)
@@orion310591RS already working on something Brother. So it's not like I'm just seated. Thank you for your concern and I've taken everything into consideration
I have been following your teachings for some months now and I believe I'm learning a lot, thanks so much for this kindness, here our PC are always messed up at the workshops here because of no good knowledge of how these components works, you are really a great man honestly, May God bless you more with great knowledge and good health 🙏
Glad to see you are on form and back. I appreciate all your hard work and teaching we get from you.
Great video, saved my PC from the scrap heap. The initial issue arose from a water spill on the keyboard. The symptom was an error code of 3 long and 2 short flashes on the Caps Lock key. Using your alcohol (91%) and toothbrush technique, I scrubbed the solder traces on the SSD, RAM, and several other areas (not sure what their function is). I also removed the RAM boards and wiped off the contacts both on the chip and in the sockets. Powered up and it worked! Although with the naked eye there were no bridges, there must have been some subtle fouling of either the solder traces or contact points. Thanks for sharing your expertise.
Is your data ok though?
Good to see you back, no two repairs are the same. I really enjoy these videos keep em coming.
I swear I had spilled wine from underneath and it wasn't turning on. I did this exact thing and cleaned the circuit panel and operated pins with a toothbrush and alcohol. Then blow dried it and it fired up and charged. I used to make circuit panels and do the soldering/gold plating so I was familiar with it somewhat. Thank you so much 🙏
More repair videos please Sorin! It helps keep my feed clear of all the crazy shit going on in this world of ours.
It's always awesome watching you fix these laptops, would be nice to be your student
You are a professional teacher. Have a good vocation.
Good to see you Sorin! I hope you are enjoying your holiday. Excellent video as always. May all your repairs be simple ones.
Hi, I'm Andrei, I really appreciate the work you do. Wish you could make a video to explain more how you can use a multimeter, how you can check a lot on a laptop. In a few days I have lessons from the videos. Thanks
the model number of HP laptops is absolutely crazy, is like they were drunk when they choose this type of labeling them.
Yeah😂😂😂
but I like it actually, cause different model number, different specs or color variant
Sony was "worse" on this... :) 2 different names on the same laptop...
Please where can I find you or bring ma laptop for fixing 😩?
And trying to find the exact schematic for all those models is even more ridiculous 😂
Maybe the sio pins that got the water may have been some of the keyboard connections.
That could short circuit the keyboard and power button if it was part of the keyboard.
Thank you so much for this. I spilled some juice on my laptop and I was so upset thinking I would have to pay stupid money to repair it or buy another one but, thanks to this video I was able to quickly unscrew the back and wipe up the liquid and it's good to go again. 🎉
If I open up the back of my laptop and clean up the soda, my laptop should be working fine??
@@belkdionne3154 most likely it should, when I unscrewed the back, I also had to unscrew a few small pieces to get in between the small spaces the juice spilled into, so make sure to take a picture before just in case you have to unscrew anything in the back so you don't lose track of where to screw everything back in place.
@@LadyLavenderx thank you so much for responding. I'll do that tomorrow .
Hi where there any additional issues? Mine worked just fine but after some days it's giving just a blank screen now,what do I do?
@@Zuleikha101 Hi, no mine has been working perfectly fine. Maybe check the back again, maybe some liquid might still be inside some small areas.
Happy to see your face and also hands at work! 😊
I'm always happy to see you. Thank you for the knowledge. I love that screwdriver you use
Nice and quick fix. Thanks, we are learning logic behind this kind of mistakes.
You are back and so am I, keep the great videos coming.
The most helpful video bless this man!! I’ll try this out tomorrow
Thanks for this video. The same this happened to the one I have (HP Laptop,14-dq2078wm).
Please tell me what you used to clean off the sticky residue from the liquid spill?
I think alcohol
Many thanks, I hope if you make one video describing your nice tools.
That was a good day. God bless you Sorin!!
thank you for showing everyone because mine is also broken!!!!
I would like to take A second to Thankyou for saving my laptop!! My 5 year old spilled her juice on the table and my laptop soaked it up, I instantly looked up what to do and I found your video and now it’s back on and running! Thank god for alcohol and TH-cam!😂😂
Hi Sorin are you on holiday, hope you are well, would it be possible to have more videos on repair of iphones , thanks for all you help
Great fix Sorin thanks
Thank you Sorin!
Hello I got a hp victus it has water damage. But I was told the stains can be removed. The power button blinks on and off. Do you have a shop?
Thanks for the update
GG my guy! That was an easy win for you! Take care
Thank you.
This fixed my laptop not charging prpblem but not the screen that has water problem
Sir i have same laptop with water damage. I cleaned everything but the issue is laptop is not turning on. It is charging upon connecting charger showing orange light near to charging port but when i press power on button power light blinks only on the right. Fans are also not spining what could be the issue?
Same problem here... What will do?.. Your problem was resolved??
Dupa accent esti roman, oricum, esti super bun ca profesor 🤗
Da,din Ardeal.
I like your video because you can speak a lot without actually speaking... ;)
i enjoy watching your videos and uave been learning a lot, yes in africa we have limited resources even buying inline it takes time but i have been learning a lot, Now can you please explain how differentiate testing using usb power meter when you have shorted board and when you have low battery not charging, because both situations you talk about rising current then it goes to zero
Thank you sorin!
Great sorting out issues by great samratian
Great videos resettig bios is great. Removing bioa bat is still better. Next to sort out issues
Oh sir thank you so much now customer is happy ❤️
HELLO !! One Easy Job Out The Way good teacher😊
Hi there Sorin
Great informed video as usual.
Can you please supply a link as to where you purchased that little screwdriver Kind regards
Tony
I have an HP laptop and it was working fine, but after I installed the touchpad, the laptop did not turn on, only a flash of light, and after I removed the touchpad, it turned on without a picture with the battery, but with the charger, you can see the HP logo without the background light (it stays on the logo) What could be the problem . I have been following you for a long time, thanks for all the information sir.
really appreciate your videos, I have the same water damage with 14s FQ0029 au with scaling on ribbon cables, I have cleaned what I can see, cleaned the super IU was like yours, now I have a light at the power port, 3 volts at the power on board, and battery now charging at 12volts, but not turning on, the power button light gives a faint flick while the light next to it flashes brightly after pressing the power button, any ideas guys?
Did you getbit fixed?
No I gave up for now, was thinking about getting a knew board
Is it showing a blank screen?
@@Zuleikha101 yes blank screen, the charge light works Now after the clean as per your advice / video, but nothing on the screen, it charges the battery now
The difference between me and him is, unlike him mine did not come back on at the end😂😂😂
What is the name of the liquid that you use to clean the motherboard plz ? Thanks
thanks....I will try this out
Hi there , please upload more video like this . keep it up . thnx
What about if it's FECAL water?
There was an accident in my apartment building and sewage water burst out and went into a few units, one being mine where I had left a laptop on the kitchen floor.
So, it wasn't just "liquid," but nasty liquid and it was almost totally covered by it.
Thank you if you or anyone responds.
I have a hp laptop, got real wet with water while on. After standing on its side for a week to try to drain it, wont respond to anything, wont turn on. thanks
@@todds5956 same man
mr sorin please do a video on lenovo ideapad 300 series orange light blinking, i got a one, charging port fine, main power rail presents, 3.3v on power switch presents, io got it's power but not turning on
Good job mate 👍
What tool is that?
Dear Sorin, I love your videos. I have a question: what type of hot air machine do you use? THX 4 advanced.
Do u have a shop
I spill water on my keyboard and I did not put it upside down but just waiped and turn on the device then turn off but after that some buttons not work anymore is there any solution for get them work again???. 😢😢😢😢😢
I have a HP revolve 810, its charging light is blinking orange and white light when I plug it to the charger but its not turning on, what could be the problem?
Thanks 🙏
may I please sent you my HP laptop has water damage as well. actually soda my grand baby spilled it.. where are located?
about more than month i faced same problem in super i/o the laptop stop start up from battery and i have to disconnect battery every time
my laptop lenovo ideapad 320 the drop of water come from keyboard side
My laptop has been dead for about a year is there still a way to fix it?
Good job boss
Hello sir, hope you are doing good. Sir my child poured a cup of water on my hp laptop 12th generation corei 3 previously it was on and keyboard were working but touch mouse wasn’t working then next day i try to on but it is just show white light once when i press power button but not working
my laptop drinks more beer and coffee than i do sometimes
I have been following your channel for some time, I wanted to know the address of the store you work there, in order to send a product for repair from another country. I would appreciate an answer from you or one of the followers.
Thank you
Haven't seen your videos on a while
Hi Sir, I have kind of similar laptop hp 14s dr-1009tu having an issue with it, it just heats up uncertainly and it's gets down, power light and charging light remains on but ssd light stops blinking... after this only option I left with is force shutdown. Can you please help and suggest me something.
I have two laptops (hp 15-bs634tu). Both are same matter like this.😭
I learnt a lot from u
My laptop in a new one.its a Ux325ea.it was removed due to ticking sound from the fan. The battery port was removed and fixed again as it was before.But the laptop doesnt turn on and even i if i plugged it to the charger it doesnt turn on the charging light too.Can i please know a reason for this issue😢😢
Please does anyone knows what liquid he used to clean that?
how are you sir ,how to repair water damage of Toshiba laptop plz sir , I try many shop but my laptop not working ,
Pls help me, i spilled tea on my hp laptop, surprisingly its working fine but my keyboard keys aren't working. Is there any fix? (My keyboard is non detachable just like the one shown in this vid)
Mine has light but its not showing any picture :(
I am unable to find the problem with my broken laptop Which is a shame so I will have to book a appoint ment on your website
Thanks ser
If this was a new MacBook (2020 and up), , it would not power on. You will have to connect to another MAC and restart the OS
Do you know how to a fix a hp laptop 14-fq0xxx from a restart loop from updating. I tried pressing the X, windows, and power buttons and it hasn't done anything. plus it keeps telling me that im 35% percent every hour. please help.
mine had worked but the brightness remains low
I have been following your programs it's good to me,course l want to be like you.l have a problem with gigabyte laptop that is failing to boot the old windows or from the cd l try to reset bios but l don't know how to reset time now.model number is Q1580V,Please help me.
I have an Asus laptop 55A model
It was working fine but went off when I inserted a PC pad into a regular usb port I was using my mouse in it (just finished working on Archicad and decided to play PES), it instantly went off, and went into no power no charging.. at first I thought it was the pad but am still using the pad till now on another PC and it is working fine, so my confusion is what could really be the cause of the short on the PC ?
And hence know a way out, I have tried removing RAMS to see if BIOS went back together with HDD but still no response
Bent usb pins or shorted usb
@@user-te1le7ck6b I believe it is shorted Because immediately I plugged the PC game pad the device went off, but funny enough the pad had been confirmed good and still functioning properly
How to power on direct in laptop motherboard
Hi my laptop Msi gs60 2pc only show Intel Graphic and not detected nvdia gtx 860M , is there any solution for that situation?
how many holidays do you have?
Sir, my laptop was waterdamaged. During the service its ic changed including audio, keyboard and also to c port connected ic. But currently im facing display issue. After shut down the next day it display not working. During the service it have no problem. Its third time iam facing the same issue. Do you know the reason
Laptop model- hp 15s windows 11
Hi. I spilled ice tea on my computer. I immediately disassembled it completely and left it to dry. I then reassembled it and ran it. It worked that day. After 1-2 days, I tried to run it again, it doesn't work. The light turns on when charging. But it won't open. Where should I look to disassemble it again?
How did you fix this?
@@Zuleikha101 contact sprey ( non - oil )
Nice one sir idol
Thank you, sir, for the useful information. I hope to be friends with everyone. I have the honor to have your interest. I am a beginner from Morocco. Hello
Shut the front door. That simple? The difference between knowing what you're doing and a novice opening it and taking a peek lol i have a faulty motherboard here, I couldn't find obvious fault, no burn / popped items .. diagnosis was the motherboard due to residue streaks. I replaced the motherboard, boom, was like new. The motherboard i still possess, just pulled it out of a box. They have a pet hamster, I've seen it sitting on the top of his daughters pc, there's a vent / mesh on top, my guess was it peed on the pc an some fluid made its way on most likely while the pc was running. I decided id like to know how to diagnose and repair it. Its a good gaming board.
hi how are you ?
If it was a Lenovo with the patented drain system, this problem wouldn't happen. Poor design in my opinion.
Same issue i faced today, but i am late for watch this video, i already spent money for repair my laptop 😔
I have a three year old Overpowered OP-LP3 Laptop. Recently the glue holding the display on failed and the display tilted down applying pressure to the connector. Not wanting to work on it myself I brought it to a shop that reinserted the connector but the display would not light up. The repairman opened up the computer and found burnt components on the motherboard. Problem is we can't find a schematic for this machine in order to identify the failed parts. Do you have any idea with to find a schematic for this Overpowered OP-LP3 Laptop? Andy advise would be greatly appreciated. It's a beautiful machine and I really need to get it working. Thank you in advance.
Hey again we miss you its been longue time you didnt post a video, welcom again, need all your vidos succesed and failed repair :)
i have asus gl504 with weird problem, the keyboard and lighting does'nt work, the keyboard flex is clean and in good condition, what will cause this problem?!
Tried remove and replace keyboard, update and downgrade bios firmware, model gl504gm 314 and 313 version
the keyboard doesnt work except power button, also i have problem, the serial number is not shown on bios menu, could you sell dump bios for that model with it own serial number from doner board?
did the keyboard work inside bios?
@@maklogetrich2378 the keybord dont work on bios, power on light on botton is not on, backlit light rgb is not powering on also
thanks Sorin , in france similar screw driver is about 180 €. but with torque control ..very good videos as always , holidays never for you ? it is very bad to design a good computer and don't think of usage in normal life , when going outside in the rain you always think to protect the keyboard , and turn it upside down ...and here it kills the thing , bad design from HP , luckily they don't make phones nor printers , sorry they make expensive cartridges...HP is a bad company since profit margins have to go high to please investors ...hope they survive after complete management to be a clean green company !!
Buonasera, sono Italiano, ho un portatile ASUS FX505GD con dei problemi, lo schermo nero, la tastiera è illuminata ma non parte, questo, penso che sia stato la conseguenza della condensa che si è venuta a formarsi nel portatile, dato l'eccessivo caldo dei giorni scorsi avevo riscontrato un eccessivo riscaldamento del cpu e gpu e avevo usato un sistema di raffreddamento pielter da me autocostruito, la cosa ha funzionato sono riuscito a abbassare di molto i gradi, però è successo che con la condensa che si creava pare che si sia rovinato il portatile che ora è in assistenza speriamo che si possa aggiustare. Quello che le chiedo, sempre se è possibile, se c'è una soluzione per la condensa creata dai pielter, come si possa eliminare dando sempre la quantità di gradi in meno. Grazie anticipatamente per la risposta la seguo molto per la sua grande professionalità e il suo condividere le sue esperienze, Grazie infinite
Sorin if you have a power supply you aren't using please give me🤣😂🤧🤧🤧 I'm a young technician from Zambia-Africa who has been greatly inspired by your works for a long time now
Nothing is free and nobody give anything for free. Better start thinking and u will find/make one. Get power supply board from scrap DVD device or video recorder, or TV. On that power supply you have 3.3V, 5V, 12V, 24V... then u can use voltage divider (potentiometer) to adjust to other voltages. And dont forget to limit current ;)
@@orion310591RS already working on something Brother. So it's not like I'm just seated.
Thank you for your concern and I've taken everything into consideration
Sir, you will make more laptop repairing videos. I always seen your videos.
Wow !!!
Hello
Bank holiday today Sorin ?