Great video. Since I'm a newbie, had issues until I realize that the cam pin has to be turned to get the bolt back in. A suggestion would be to point this out for others. One learns most with burned marks on their butts!
Had figured this out before the video, but liked that somebody else noted it on a video since that was the first time id ever had to even think about it.
People who are struggling as I was. Your bolt inside the carrier needs to be fully extended. Also, pull out the charging handle so the gas key can slide it, drop both together.
somehow i had the bolt back like it should be, cam pin in place, but didn't realize for wayyy too long that the whole bcg was backwards. thanks for the help lol
Just getting into Ar's. Grabbed two complete rifles by Sig and only got to mount optics and slings on them. Decided to also grab up a lower and upper from Palmetto State as the price is great and figure it would give me some experience placing together. Waiting on lower to arrive and had the spare red dot from one of the Sigs (mounted a lpvo on that) along with mbus iron. Removed charging hand and bca. Was having slight difficulty getting back in. The slight angle pointed out in video was the little trick needed. Thanks.
Thankyou! I was being a dumbass again and forgot I needed to rotate that tab on the top of the bcg... couldn't figure out why it wouldn't go in. Went in perfectly afterwards lol
Ordered an upper for an AR-10 build that was the only one that came with out the charging handle and bolt carrier group. Just received the ordered parts, looked at this for reference and popped it in within a minute. Thanks for the reference 🙂
My Charging handle was milspec and my lower was an Aero precision 10.5" AR15. I thought I knew how to do this since I had done it before. Well my charging handle was not rising up into the groove and when I pulled it out the upper reciever was leaving indents on the Charging handle. The video gave me the confidence to keep trying and I was going to put a file to it where i saw the indents but after a few tries and a little push it rose up and we got it put together.
37 seconds yeah ... ... just stap it up in there ! R I g h t ! The part they left out was that the ears (_) on the charging handle MUST "drop" through a corresponding slot (__) first visible from the bottom; before sliding the handle forwad.. }}}B00M{{{ ... it was over just like that !
Thank you SO MUCH for this! I JUST got 2 Geissele SC handles and was having a little problem getting the bolt back in until I saw this! Once again, THANK YOU!
If it seems like it’s getting stuck on something make sure the cotter pin that retains the firing pin is FLUSH. IT SHOULD NOT be protruding at all. That was my mistake!
Great video. Since I'm a newbie, had issues until I realize that the cam pin has to be turned to get the bolt back in. A suggestion would be to point this out for others. One learns most with burned marks on their butts!
THANK YOU. Rewatched the video a bunch of times couldn't figure out what I was doing wrong.
Thanks
Had figured this out before the video, but liked that somebody else noted it on a video since that was the first time id ever had to even think about it.
Same here! Thanks for the comment. :)
How do you do it. I can't get thr bolt back in
Thank You... spent like 45 mins and couldn't figure out how to get it back in. Did it in like 3 seconds after watching this.
People who are struggling as I was. Your bolt inside the carrier needs to be fully extended. Also, pull out the charging handle so the gas key can slide it, drop both together.
Thank you 🙏
This was my issue, because if the bolt was inside the carrier all the way a little ridge of metal wouldn’t let it slide it
Thank you 💪
Thank you!
That’s a very important piece of information. Thank you! 🥸😊
Thanks bro
great video. straight forward and to the point. thanks!
I am newbie and tried to put bolt carrier in backwards..... some vids not very clear on this. Yours was good. Did not force it thank god!
SOO MUCH BETTER THAN OTHER VIDEOS THANKYOU
Thank you Dr. Brule! Very concise
somehow i had the bolt back like it should be, cam pin in place, but didn't realize for wayyy too long that the whole bcg was backwards. thanks for the help lol
Well that was easy
I did the same steps but was scared I was doing something wrong . Glad he confirmed ot
I laughed after watching the video and said to myself "Wow that was easy, and thank god it wasn't 5 minutes long"
Just getting into Ar's. Grabbed two complete rifles by Sig and only got to mount optics and slings on them. Decided to also grab up a lower and upper from Palmetto State as the price is great and figure it would give me some experience placing together. Waiting on lower to arrive and had the spare red dot from one of the Sigs (mounted a lpvo on that) along with mbus iron. Removed charging hand and bca. Was having slight difficulty getting back in. The slight angle pointed out in video was the little trick needed. Thanks.
Thankyou! I was being a dumbass again and forgot I needed to rotate that tab on the top of the bcg... couldn't figure out why it wouldn't go in. Went in perfectly afterwards lol
Fucking same bro I was like I’ve done this hundreds of times wtf is wrong
thanks homeslice
Dude I've been stuck with this for 20 mins being gentle n all but I couldn't get It proper especially being hella lubed. Ty
Thank you for keeping it simple. I’ll remember this next I’m putting my AR back together. Thanks!
Ordered an upper for an AR-10 build that was the only one that came with out the charging handle and bolt carrier group. Just received the ordered parts, looked at this for reference and popped it in within a minute. Thanks for the reference 🙂
WHAT!?!?!?! Just like that? no oil or anything else needed?
Is the Charging handle being oiled?
Thank you for the video.
The effing thing is stuck on something. Ive done this before, I know it isn’t that hard, but I can’t figure it out!!!!
Bro you would make more sense showing more visually than fucking talking😂
My Charging handle was milspec and my lower was an Aero precision 10.5" AR15. I thought I knew how to do this since I had done it before. Well my charging handle was not rising up into the groove and when I pulled it out the upper reciever was leaving indents on the Charging handle. The video gave me the confidence to keep trying and I was going to put a file to it where i saw the indents but after a few tries and a little push it rose up and we got it put together.
37 seconds yeah ...
... just stap it up in there !
R I g h t !
The part they left out was that the ears (_) on the charging handle MUST "drop" through a corresponding slot (__) first visible from the bottom; before sliding the handle forwad..
}}}B00M{{{ ... it was over just like that !
There is likes a grabbing pivot on the upper so when inserting it put the charging handles nudge after that and the push up and forward
I like it .. simple and straight forward
😳 what the hell have I've been doing, ty
Thank you SO MUCH for this! I JUST got 2 Geissele SC handles and was having a little problem getting the bolt back in until I saw this! Once again, THANK YOU!
If it seems like it’s getting stuck on something make sure the cotter pin that retains the firing pin is FLUSH. IT SHOULD NOT be protruding at all. That was my mistake!
First time for everything
It’s all about the angle
easy with you .
Well I’ll be damned.
I have the PSA 10.5" 5.56 NATO 1:7 NITRIDE UPPER - WITHOUT BCG OR CHARGING HANDLE - 507020
so what kind BCG n charging handle do I buy
thank you!
I have done it a hundred times but I just couldnt figure it out today. This video helped but I feel a little stupid
No need to angle your bcg though
Here is a better breakdown. This video glosses over some details: th-cam.com/video/mE7LhTAktXM/w-d-xo.html
Nick M is right, this video is better ^ 🇺🇸
Всё наглядно.
This is a hilarious 😂😂😂 thanks for this
I found this to be helpful and succinct. Thanks! 😊
perfect video - thank you
Soo simple.
mine dont do that LMFAO
Thank jesus😊
AWESOME- very simple technique that sure does work- thanks for the awesome video!
Thank you!
Lol I was putting my bcg in backwards
Hey yea thank you!
Thanks
Love it
wtf is that song, it's heavy as fuk
bro fr lmao i tried to shazam but it nothing came up. it's gotta be a non-copyright release but i cant find it anywhere. Any luck?
Mines never this east have to shove and beat it with a hammer
Definitely doing something wrong, should slide in easy