These are the axes of the Helifar MAN or JJRC Q64. Can be the same as the D90 axles. I have taken the axles because of the differential that the HEMTT does better steering and the turning circle gets smaller, but is worse than locked in heavy terrain Axes. Thank you for the praise
Hi I love the front grill exhaust and air filter mod. But I see you got a problem whit the axles the jjrc are 2.50 to 1 ratio and the wpl and fayee are 2.25 to 1 ratio.
'm glad that you like my conversion. You're right with the drive axles, thought it does not matter much with the gear ratio of the gears. During the test drive, the front cardan joint broke from the main drive shaft. I then hit the rear WPL axles against JJRC Now I have reservations because I have installed in my latest project, the HEMTT 10X10, JJRC axles and as the first front drive axle a FAYEE (for reasons of space because of the servo linkage). But I'll just build and wait for the test drive. Nice that someone looks so carefully and writes a commentary. Thank you and best regards from Germany
Hi, do you have a video of the conversion from 6x6 to 8x8 please? I'm gathering the parts to convert one of these to 8x8 and it would be good to see if there is anything I have missed!
th-cam.com/video/IORxMzfYE0w/w-d-xo.html I use the standard drive through the axles. In this video you can see it better. The cardan shaft between the axles has to be shortened a bit.
Nice build, you sure are a busy fellow with a very active channel. Hard to tell but it looks like you are only steering the second set of wheels and not all of the front four, is that right?
@@stefanschabo5202 Sorry, I watched a later video where you were running the trucks and saw that it indeed had 4 wheel steering. I'm 3D printing a 1/10th scale one of my own. I'm getting ideas from you on how to finish it up so it looks real. Thanks for all the great videos of your numerous projects!
👍😃😃@@MrVein5.0 Then look forward to Part 2. I'm building and make a movie. Part 3 will be the hammer premiere the special charge the Oshkosh gets. I can not keep any secrets: It's going to be a Vietnam PBR
👍👍😃😃@@MrVein5.0 Then look forward to Part 2. I'm building and watching movies. Part 3 will be the hammer the special charge the Oshkosh gets. I can not keep any secrets: It's going to be a Vietnam PBR
This thing is looking sweet. Great build
Thank you, the praise is good and courage to continue building.👍👍👍
will the D 90 axles work under the wlp B36 ? awesome work.
These are the axes of the Helifar MAN or JJRC Q64. Can be the same as the D90 axles. I have taken the axles because of the differential that the HEMTT does better steering and the turning circle gets smaller, but is worse than locked in heavy terrain Axes. Thank you for the praise
Hi I love the front grill exhaust and air filter mod. But I see you got a problem whit the axles the jjrc are 2.50 to 1 ratio and the wpl and fayee are 2.25 to 1 ratio.
'm glad that you like my conversion. You're right with the drive axles, thought it does not matter much with the gear ratio of the gears. During the test drive, the front cardan joint broke from the main drive shaft. I then hit the rear WPL axles against JJRC Now I have reservations because I have installed in my latest project, the HEMTT 10X10, JJRC axles and as the first front drive axle a FAYEE (for reasons of space because of the servo linkage). But I'll just build and wait for the test drive. Nice that someone looks so carefully and writes a commentary. Thank you and best regards from Germany
Hi, do you have a video of the conversion from 6x6 to 8x8 please? I'm gathering the parts to convert one of these to 8x8 and it would be good to see if there is anything I have missed!
Amazing amazing
Thank you very much
Have you thought about adding a sound module?
I haven't found one that is cheap and I like it.
Do you show how to make the 2nd front transfer case with turning? Or; did you combine the pass through with a standard front?
th-cam.com/video/IORxMzfYE0w/w-d-xo.html I use the standard drive through the axles. In this video you can see it better. The cardan shaft between the axles has to be shortened a bit.
Nice build, you sure are a busy fellow with a very active channel. Hard to tell but it looks like you are only steering the second set of wheels and not all of the front four, is that right?
No, each front axle has its own servo, soldered together to a connector
@@stefanschabo5202 Sorry, I watched a later video where you were running the trucks and saw that it indeed had 4 wheel steering. I'm 3D printing a 1/10th scale one of my own. I'm getting ideas from you on how to finish it up so it looks real. Thanks for all the great videos of your numerous projects!
I was wondering when someone was going to do it!
😃😃😃There are certainly many, but nobody dares to film it.😊😊😊
awesome
Thank you, I just build on it-without plan and build what I find so in my environment.😃😃😃
@@stefanschabo5202 thats what cool about your builds
👍😃😃@@MrVein5.0 Then look forward to Part 2. I'm building and make a movie. Part 3 will be the hammer premiere the special charge the Oshkosh gets. I can not keep any secrets: It's going to be a Vietnam PBR
👍👍😃😃@@MrVein5.0 Then look forward to Part 2. I'm building and watching movies. Part 3 will be the hammer the special charge the Oshkosh gets. I can not keep any secrets: It's going to be a Vietnam PBR