Honda TRX350 - Suspension Repair (Part 1)
ฝัง
- เผยแพร่เมื่อ 31 ส.ค. 2018
- Repairing the suspension on a Honda TRX350!
So one of my customers brought in an ATV for me to fix up. He said the guy he got it from crashed it & it was in need of some repair...
In Part 1 we start removing components to see what needs to be replaced.
I remove the tire, tie rod, upper & lower a-arms (control arms) & also the spindle (Knuckle).
Initial signs of damage are clear & I establish a list of parts that will need to be ordered. This allows me to inform my customer of an approximate price that he'll be paying for this repair.
In Part 2 we'll order up some parts, install some new components & also fix the brakes that were also damaged in the process!
Part 2: • Honda TRX350 - Suspens...
Part 3: • Honda TRX350 - Suspens...
Part 4: • Honda TRX350 - Suspens...
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
DONATE:
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - แนวปฏิบัติและการใช้ชีวิต
Part 2 should be up on Wednesday night!
great work!!!
Thanks!
Good video!! Thank you!
Thank you!
I subscribe because you get right to work with out blather and use clean language. Thanks
Thank you!
do you know the part number for the large o ring that goes on the knuckle?
No, but go to www.partzilla.com and enter your info, you'll get a parts diagram.
Looks like a lot of damage, how is the driver? You would think they flew right over the handlebars!
He was ok, bent the handles too so I think he flipped it!
Just an FYI, there are alternatives to OEM parts. While I agree that in most cases, it is best to go oem for quality, in some cases, a better part can be had for less money than OEM. Case in point with the weak stock tie rods. You can buy beafier aftermarket rods and ends for less than one new one! For example:
www.discountstarterandalternator.com/p/tie-rod-upgrade-kit-honda-trx350tm-fourtrax-rancher-350cc-00-01-02-03-04-05-06/