Worked for me in my 2022 Toyota Rav4 Adventure. Many options on the touch screen were disabled including adding a new device for Bluetooth, Language settings, etc. This reset everything and all the options are accessible
Sir God bless you!!!! The first option didn't work, but the second one was magical. I can't afford for Toyota to charge me for this type of fix. May your family be blessed. Appreciate this so much. TH-camrs are the best.
Thank you so much. I took my 2017 Toyota Highlander to the dealership and they couldn't do this reset. . Almost a month without been able to liste to what i want.
Good citizen, thank you very much it worked on my 2014 Toyota Tundra. The dealer wanted $100 to diagnose and another $150 to Reprogram the radio what a scam. BLUETOOTH AND MAP ARE WORKING NOW.
They always want to make money.. then they take your original radio, they tell you that it no longer works, they keep it, reset it and sell it as a refurbished radio
Thank you it worked. I have a 2014 Tacoma got a new phone, connected it to bluetooth no problem. The next day, got in my truck no phone connected. BLUETOOTH and PHONE button grayed out. I called Toyota they had no reasonable recommendations. So, I am sharing this solution with them. Thanks again
Toyota will moSt likely try to ban my video because it will cause them to lose money.. they usually make money by telling people to bring in their cars, they charge them over 250 dollars just to do this, they make it seem as if they replace the radio or something, just to make money .. read some of the comments in this thread and you'll see what I'm talking about
I just tried this in Australia on my Prado and wow it worked, but the problem I have now is the Bluetooth address and pin was wiped when the problem first happened. Any Bluetooth and pin fixes much appreciated. Thanks so much unbelievable.
OMG I spent weeks trying to figure out how to reboot the screen because it seemed as the bluetooth was stuck and I wanted to avoid taking it to the dealership and pay an arm and a leg for something so simple. I am so glad I came across your video!!! Thank you sooo much! This worked perfectly on my 2014 Highlander.
Thanks u saved me a long road trip talking to my son! Now I can resume zoning out to podcasts instead of hearing about his life and dreams!....joke thank u so much now we can listen to our tunes! Thanks
DOOD THANK YOU!!!!!! I have a manual start vs. the push button and this still WORKED! THANK YOU!!! Sending a huge bear hug from me and my 2014 Tacoma from NC! THANK YOU!
Thank you, my friend. The suggested sequence worked like a charm on my 2014 Highlander. Both bluetooth and map navidation stopped working after my daughter drove the car and said she had had issues connecting her iPhone. I guess she just maxed out the list of connected devices. The system has been reset now, and everything is back to normal.
This worked perfectly! The tech at the Toyota dealer only knew to totally remove the nav/radio and short the power leads to do a hard reset. My problem was with the Nav voice disappearing intermittently. Since I've done this the voice has yet to disappear. Thanks Dennis!
Thanks a lot it worked for my tundra 2014 with the physical key in the ignition. Turn the key to on two times but don’t turn on the engine and follow the rest of the steps on the video. It will work
Ok, if you have Key and No-APP option… turn key twice, just as he stated with “ start button” … when turning your lights on 3 times, and don’t have an APP button, press the “ setup” button instead. Also , after you press the final “ok”…turn off key right away, otherwise it won’t work and you’ll have to redo. I just did this on my 2014 Tacoma, again, it doesn’t have an APP button and has an actual key….. many thanks to the original post!
@@omarobaleed291 also, I don't think you're supposed to press the INIT button for 2 seconds. Just press it normally. And hopefully you'll get the pop up message afterwards
Thank you!! thank you!! thank you!! My kids were screwing around with adding their phones to my system and I had the same issue. That reinitialization worked!! You're the best!
Thank you so much!! you are so intelligent to have figured out this fix...amazing to me that the Toyota mechanics have no idea about this or if they do they will not tell customers. again, bless you!!
Worked like a charm! My 2014 Tundra has a key, not a start button. So I just had to turn the key on without starting it. I would have never figured the sequence out without your video. Thanks Bro!
My touch screen on my 2013 Highlander was dimmed to the point you could barely read it. I tried increasing the brightness, contrast, day settings. This didn’t solve the issue. I have a key ignition system. I turned it to bring the power on but did not start the engine. I then pushed the volume knob down and turned the lights on and off three times. It didn’t seem to work so I depressed the power button and held it in while turning the lights on and off three times. The screen lit up the way it was supposed to. Thank you for posting this video!
Dude thank you brother!!!!! So my 2014 tacoma keeped saying searching for Bluetooth and no matter what I did couldn't fix it ..i even went on a long road trip with no music 😐 until I seen this video Gracias hermano, its good as new!!
Awesome! Worked perfectly in my 2015 Highlander! One note is that I didn’t get the “INIT” screen until I took my finger off the APP button. Wish I took pictures of my preset stations before this deleted them, but once I started I was too excited to stop.
Worked perfectly for '14 Tundra. Phone and Bluetooth was greyed out and this was perfect fix. Why don't they put this in the manual??? I searched it forever. Thx for posting the fix.
this totally worked! lol. 2014 Tacoma. No engine start button push needed. Just turn the key, hold the APP button and turn the lights on and off 3 times.
Thanks so much it worked!! My radio was a little different so the button I pressed was on the right side. Also mine starts with a key. Thanks for making it easy to understand
Screaming 😱 Thank you !!!!! For sharing this great video I was going crazy trying to figure out how to fix this issue...until I found this video thank you so much!!!!
Thank you so much! The bluetooth went out on us in the beginning of our road trip to Maryland. Now week can listen our music on the way back to North Carolina.
thank you so much man. My issue wasnt that bluetooth was greyed out but rather that it wouldnt let me connect any devices to the car. Nonetheless, this helped, so thank you.
Thanks Buddy, worked like a charm on my 2014 Tundra. I was able to get to the INIT screen with the engine turned on (Mine is a key ignition). The problem began when my son paired his I-phone. After that my Samsung Android wasn't good enough apparently. Back to rolling hands free. Cheers
Hey man thanks so much for that information my wife has been with out her bluetooth/phone capability in her 2017 Toyota Highlander for a year and the Toyota dealership wanted over $1,000 bucks to fix it! So thank you my dude!!
This works !! Thank you so much ! I have a 2014 Toyota Tundra and it worked I don’t have a push button but I turned it on twice with out having the engine on it worked!
SI FUNCIONAAA !!! MUCHAAAAS GRAAACIAAAAS !!!! EXCELENTE VIDEO Y RECUERDEN SE DEJA OPRIMIDO EL BOTON DE APPS AL MISMO TIEMPO QUE SE LE DA 3 VUELTAS A LAS LUCES PARA QUE NOS PUEDA APARECER LA PANTALLA EN GRIS. YO BATALLE MUCHO CON ESO POR NO SABER TANTO INGLES.
Hi my 4 runner 2018 volume is not working my phone is connected but no volume. When i turn the volume the yellow bar is not showing...maybe you can help me..thanks
If you find my video helpful, please feel free to donate to my channel on Cash app 🙂
$denny3051977
Worked for me in my 2022 Toyota Rav4 Adventure. Many options on the touch screen were disabled including adding a new device for Bluetooth, Language settings, etc. This reset everything and all the options are accessible
Glad it worked 😀
Sir God bless you!!!! The first option didn't work, but the second one was magical. I can't afford for Toyota to charge me for this type of fix. May your family be blessed. Appreciate this so much. TH-camrs are the best.
You're welcome!
Thank you so much. I took my 2017 Toyota Highlander to the dealership and they couldn't do this reset. . Almost a month without been able to liste to what i want.
You're awesome. Keep with this type of post. I'm following you now
@@Angelnygel2 how much were they trying to charge you to have this issue fixed?
@@Tech305MIAMI they were going to run a test to see what the problem was and charge me $75 and then they would had a charge me if they get it fix
My 2015 Tacoma doesn’t have the “APPS” button but rather “SETUP”. I followed the same process and it worked perfect, thank you.
Good citizen, thank you very much it worked on my 2014 Toyota Tundra. The dealer wanted $100 to diagnose and another $150 to Reprogram the radio what a scam. BLUETOOTH AND MAP ARE WORKING NOW.
Wow.. $250.00 to fix this problem??? Incredible ! Glad it worked for you!
The Toyota dealer told me I had to buy a new radio (~ $800) for my 2014 Tacoma. But I followed your instructions and it worked! Thank you!
They always want to make money.. then they take your original radio, they tell you that it no longer works, they keep it, reset it and sell it as a refurbished radio
Thank you it worked. I have a 2014 Tacoma got a new phone, connected it to bluetooth no problem. The next day, got in my truck no phone connected. BLUETOOTH and PHONE button grayed out. I called Toyota they had no reasonable recommendations. So, I am sharing this solution with them.
Thanks again
Toyota will moSt likely try to ban my video because it will cause them to lose money.. they usually make money by telling people to bring in their cars, they charge them over 250 dollars just to do this, they make it seem as if they replace the radio or something, just to make money .. read some of the comments in this thread and you'll see what I'm talking about
I just tried this in Australia on my Prado and wow it worked, but the problem I have now is the Bluetooth address and pin was wiped when the problem first happened. Any Bluetooth and pin fixes much appreciated. Thanks so much unbelievable.
OMG I spent weeks trying to figure out how to reboot the screen because it seemed as the bluetooth was stuck and I wanted to avoid taking it to the dealership and pay an arm and a leg for something so simple. I am so glad I came across your video!!! Thank you sooo much! This worked perfectly on my 2014 Highlander.
You're welcome.. it was driving me crazy also 😁
Thanks u saved me a long road trip talking to my son! Now I can resume zoning out to podcasts instead of hearing about his life and dreams!....joke thank u so much now we can listen to our tunes! Thanks
@@MitchMacdonald-tb3lf lol
DOOD THANK YOU!!!!!! I have a manual start vs. the push button and this still WORKED! THANK YOU!!! Sending a huge bear hug from me and my 2014 Tacoma from NC! THANK YOU!
Thank you, my friend. The suggested sequence worked like a charm on my 2014 Highlander. Both bluetooth and map navidation stopped working after my daughter drove the car and said she had had issues connecting her iPhone. I guess she just maxed out the list of connected devices. The system has been reset now, and everything is back to normal.
This worked perfectly! The tech at the Toyota dealer only knew to totally remove the nav/radio and short the power leads to do a hard reset. My problem was with the Nav voice disappearing intermittently. Since I've done this the voice has yet to disappear. Thanks Dennis!
You're welcome !
Thanks man this really helped me I thought my car entertainment system was broken until I found your video
Can't believe this actually worked... Thank you!
Thanks a lot it worked for my tundra 2014 with the physical key in the ignition. Turn the key to on two times but don’t turn on the engine and follow the rest of the steps on the video. It will work
Yea.. I'd imagine that that method would work with the key🔥🔥💯💯
This 100% worked!! I have a 2014 Tundra 4x4 and using the physical key worked. Thank you!!!
@robert cast can you help me out ? It won’t work for my 2014 tacoma
Ok, if you have Key and No-APP option… turn key twice, just as he stated with “ start button” … when turning your lights on 3 times, and don’t have an APP button, press the “ setup” button instead. Also , after you press the final “ok”…turn off key right away, otherwise it won’t work and you’ll have to redo. I just did this on my 2014 Tacoma, again, it doesn’t have an APP button and has an actual key….. many thanks to the original post!
Thank you so much, it was totally amazing
I'm glad that this method worked for many of you, like I said, I don't know if this will work on older Toyota models.
I followed the steps in my tacoma 2012 and I pressed INIT two seconds But the message does not appear What can I do
@@omarobaleed291 if you didn't get the message then it means your vehicle has an older system. I think this only works on newer vehicles
@@omarobaleed291 also, I don't think you're supposed to press the INIT button for 2 seconds. Just press it normally. And hopefully you'll get the pop up message afterwards
@@Tech305MIAMI I tried but the message did not appear
My 2014 tundra has a key not bottom
Thank you!! thank you!! thank you!!
My kids were screwing around with adding their phones to my system and I had the same issue. That reinitialization worked!!
You're the best!
You're welcome 🔥
Thank you so much, I tried pairing my phone with my dads Tacoma and messed it up for a few weeks. You’re a lifesaver!
Thank you so much!! you are so intelligent to have figured out this fix...amazing to me that the Toyota mechanics have no idea about this or if they do they will not tell customers. again, bless you!!
Worked like a charm! My 2014 Tundra has a key, not a start button.
So I just had to turn the key on without starting it. I would have never figured the sequence out without your video. Thanks Bro!
Finally! This is the solution I’ve been looking for. Thank you! It fixed everything!
You're welcome
you just saved my life!!!! thank you so so much! worked in my 2014 key start tacoma!
Holding down the power button worked! So simple, thank you for this video!
My touch screen on my 2013 Highlander was dimmed to the point you could barely read it. I tried increasing the brightness, contrast, day settings. This didn’t solve the issue. I have a key ignition system. I turned it to bring the power on but did not start the engine. I then pushed the volume knob down and turned the lights on and off three times. It didn’t seem to work so I depressed the power button and held it in while turning the lights on and off three times. The screen lit up the way it was supposed to. Thank you for posting this video!
Read comments within this thread . You'll find the solution there. Thanks
Thank you!!! Figured it out from this, mine didn’t resolve right away, but I cleared the memory and then it worked!
this literally fixed my bluetooth issue. so glad this video exists!
Great tutorial buddy. 2014 Tacoma. Left key in on position, then followed steps. No turn to on twice needed. Thanks!
Thank you for this video!! Very helpful & fixed my issue. Hope you have a blessed day
Dude thank you brother!!!!! So my 2014 tacoma keeped saying searching for Bluetooth and no matter what I did couldn't fix it ..i even went on a long road trip with no music 😐 until I seen this video Gracias hermano, its good as new!!
De nada! Que bueno que funcionó en tu carro! Saludos !
Awesome! Worked perfectly in my 2015 Highlander! One note is that I didn’t get the “INIT” screen until I took my finger off the APP button. Wish I took pictures of my preset stations before this deleted them, but once I started I was too excited to stop.
Glad it worked for you 🙏
Worked! On the key trucks just turn it to have the displays light up but do not start the truck. THANKS!
I have a 2014 Toyota Tundra. Key turn instead of press to start but worked exactly like he said. Thanks for the fix!
Worked perfectly for '14 Tundra. Phone and Bluetooth was greyed out and this was perfect fix. Why don't they put this in the manual??? I searched it forever. Thx for posting the fix.
Because they want you to take the vehicle back to the dealer and charge you 250 dollars just to fix it themselves 🤷🏿♂️
this totally worked! lol. 2014 Tacoma. No engine start button push needed. Just turn the key, hold the APP button and turn the lights on and off 3 times.
Thank you so much for this video!!! Worked perfectly.
Only thing that worked on my 2014 Toyota Camry! Thanks!!
Merry Xmas!
Thanks so much it worked!! My radio was a little different so the button I pressed was on the right side. Also mine starts with a key. Thanks for making it easy to understand
EVERYONE WHO HAS GREYED OUT ICONS THIS VIDEO IS IT AND IT SOLVED EVERYTHING
Screaming 😱 Thank you !!!!! For sharing this great video I was going crazy trying to figure out how to fix this issue...until I found this video thank you so much!!!!
Thank you so much! The bluetooth went out on us in the beginning of our road trip to Maryland. Now week can listen our music on the way back to North Carolina.
It really works for me. Thank you so much! I almost went to the repair shop but you safe me money. Thanks again.
thank you so much man. My issue wasnt that bluetooth was greyed out but rather that it wouldnt let me connect any devices to the car. Nonetheless, this helped, so thank you.
Thanks so much! This fixed mine after a 6th device was paired and broke the whole thing!
😊😊😊 thank you so much for your help. I'm glad I found this page. Even my son was dumb founded on this
Cheers to you
@@jackiepoole5822 you're welcome
Thanks Buddy, worked like a charm on my 2014 Tundra. I was able to get to the INIT screen with the engine turned on (Mine is a key ignition). The problem began when my son paired his I-phone. After that my Samsung Android wasn't good enough apparently. Back to rolling hands free. Cheers
You're welcome!
It worked for my 2018 Highlander even the ignition key is not a button it's a key. Thanks!
This actually worked on my 2014 Highlander !. Thank you so much
You're welcome.. glad I was able to help.. Toyota would have charged you 140 dollars
Dude your a life saver. Ok not really but a Definite time saver. This worked great for my 2014 Toyota tundra, awesome job thanks so much. You the man.
You're welcome 🔥
Thank you! I was getting really frustrated. 😅
Thx bro I was having the same problem I couldn’t connect to Bluetooth really appreciate it
Best video ever! Thanks brother, worked on my 2014 Tacoma
Pushing the radio power button to reset helped me. I have a 2015 Rav4. Thank you!!
glad that method worked!
Thank you boss!
Hey man thanks so much for that information my wife has been with out her bluetooth/phone capability in her 2017 Toyota Highlander for a year and the Toyota dealership wanted over $1,000 bucks to fix it! So thank you my dude!!
Yea man... They told my wife the same thing and that's why I figured out a way on how to fix it... Save some money 💯
This is real. It worked perfectly
Thank you!! You saved me from a 3 hour drive with just radio!!
You're welcome💯💯💯good thing you didn't take it to Toyota because they would have charge you close to 200 dollars 😬😬
It worked on my 2014 Toyota Tundra!! Thank you!
Wonderful !! IT worked perfect in my 2014 Highlander thanks bro..I appreciate IT very much..God bless you.
You're welcome ! Hit like on the video :)
I just tried this on my 2015 Highlander and it worked. Thanks so much for sharing your solution!
I was skeptical at first but I tried it anyway. Well, it worked. Thank you so much for the video.
You need be a believer 😂😂😂😂
Thank sir. Worked on 2014 Camry. Screen calibration was way off and could not press needed buttons.
Very awesome man!! The reset worked and now i can listen to music again. Appreciate you!
You're welcome.. glad I was able to help!🔥🔥
Thanks man! It worked on my 2015 toyota tundra! You saved my time and money!
Worked on a 2014 4Runner too! Saved the day
You're welcome
You’re a warlock bro thanks . Helped me a lot .
Subscribed because this saved my marriage
@@JN-vt7mz 😂😂😂 you tried adding a whole bunch of Bluetooth devices on her car huh? 😂
Thank you so much for this video my girlfriend and I tried everything and nothing worked. Hats off to you bro😎!
You're welcome!🔥🔥
Thank you so much this worked on my 2015 Toyota 4Runner!
been looking for fix...worked great on 2014 Tundra...tx
Glad it worked!
Thanks!! It really helped me a lot , it works now thank you
Thanks a lot!! Tech 305, My Tacoma and I come back to be happy...Regards
It worked on my 2018 Tacoma. Thank you sooo much! 💛
Thank you so much for the video. It worked for me.
Thank you so much I just got my car it’s a Toyota Venza and the phone and Bluetooth were gray
Amazing - this worked perfectly for my Toyota Prado!
Thanks for the Video I have a 2011 Toyota Camry it says no disc I installed a disc and still nothing can you reset a 2011 Toyota the same way?
Thank you thank you thank you!!!! Your video was extremely helpful.
You're welcome!
Impressive!!! Couldn’t believe it worked and how easy
Glad it worked for you !
The best!!! Thanks man, it worked for my tacoma 14.
You are a lifesaver!! Thanks so much!!
It worked!!! Yeah! Thank you so much!
Thank you very much. It works on my Toyota Tundra 2014.
Thanks, man, this worked great!
Thank you so much! Saved me a trip to the shop!
Your a gentleman and a scholar. Muchas gracias senior
Denada amigo...glad it worked .🔥🔥🔥
Thanks this was dope and 100% fixed my phone without spending a dime 💯💯
you're welcome!
It worked on 2020 highlander, thanks yo!
Thanks for this. Got my system back up and running
It works!! Thanks!!
This works !! Thank you so much ! I have a 2014 Toyota Tundra and it worked I don’t have a push button but I turned it on twice with out having the engine on it worked!
You're welcome!!
So did you turn it on twice with out starting then hold the app button and do the headlights
@@amybrown8469 correct.. just turned your key twice.. don't turn the engine on.. then follow the rest as you see in the video
@@Tech305MIAMI thank you having the issue with my 2014 tundra
Thank you very much. It was very helpful 🙂
Glad it worked. You saved lots of money. Toyota charges over 500 dollars just to "fix" this lol
SI FUNCIONAAA !!! MUCHAAAAS GRAAACIAAAAS !!!!
EXCELENTE VIDEO Y RECUERDEN SE DEJA OPRIMIDO EL BOTON DE APPS AL MISMO TIEMPO QUE SE LE DA 3 VUELTAS A LAS LUCES PARA QUE NOS PUEDA APARECER LA PANTALLA EN GRIS. YO BATALLE MUCHO CON ESO POR NO SABER TANTO INGLES.
Debería de hacer una versión en español verdad?🤔🤔🤔🤔
@@Tech305MIAMI SI POR FAVOR. LOS QUE NO SABEMOS INGLES BATALLAMOS MUCHO PARA LOGRARLO.
@@solobinito tienes razón hermano, este fin de semanas hago una versión en español
It worked bro!!!!!! Amazing
What if this doesn’t work? And what does the memory clear button do?
Read the comments on this thread . This does what I said on the video. Factory resets your media radio device
@@Tech305MIAMI my Bluetooth and phone aren’t lite up. I’ve done this three times and they still don’t light up.
Thank you very much it worked for my 2014 tundra thanks alot
Hi my 4 runner 2018 volume is not working my phone is connected but no volume. When i turn the volume the yellow bar is not showing...maybe you can help me..thanks
Excellent video. Thank you!