TDS LEVELS : 50-150:(excellent ) most suitable nd acceptable for Drinking water. 150-300:(Good) acceptable for Drinking water . Less than 50: Unacceptable for drinking water because of lack of important minerals in purified water .
Once set ur purifier TDS level between 90-150 as as shown in video by loosing TDS bolt (screw). And check after few days is it b/w "50 -150": (Excellent ) then it is most suitable nd "acceptable for Drinking". If it is below "50" then pls contact any purifier mechanic. Less than 50: "Unacceptable" because of lack of important minerals in purified water. 150 - 300: Good - "Acceptable for Drinking" I hope u understand
After many month Inlet water for filling the tank is reduced day by day takened too much of time like droplet 💧, for That i adjusted tds now i feeling some taste is too much difference wt to do?
Note :Loose the TDS Bolt little bit Olny. If ur purifier is above 1 year old then u need to change these one to get water flow nd pure water. 1)U need to change pre filter every 3-4 months. which is outside of purifier tank 2)And change Sediment filter every 6-12 months. which is inside the purifier 3) And change Carbon filter every 6-12 months. which is inside the purifier 4) change Ro membrane every 2-3 years. First u need change first 3 filters if u got high pressure water no need to change 4th one . Or if u got same problem then change Ro membrane also. Finally u get better results. OR Consult ur purifer services man. 🔥🔥(67%off)Buy Best Water Purifier Candle/Pure Sediment Cartridge candle amzn.to/3jQ2uyn I think it is helpful to u I hope you understand. Thanks for watching my channel 😊
Purity of water depends on filter candle nd maintenance nd its flow also.if we use slow water flow purity will becomes increase because more impurities r removed in that time. I hope u understand. Thanks for watching my channel
Night sleeping time lo on chesthe manchidhi because night time lo water ekkuvuga use chyaru (bathing,dish washing..etc)appudu water flow ekkuvuga untundi so purifier lo unde moter ki elanti problem radhu.so night sleeping time lo on chesthe water fill ayyi automatic ga off avuthundi. So morning lesi switch off chesuko vachhu. Mee tap lo water flow speed ga unte morning cooda on cheyavachhu. Meeku addham ayindi ani bavistunnanu. Thanks for watching my channel. Stay tuned my channel for more videos.
Every 2-3 yrs RO membrane ni change cheyali alage bayata unde filter candle ni every 4-5 months change cheyali appude mineral water manchiga untundi. I hope u understand Thanks for watching my channel
should be maintain 1:3 ratio of pure and waste water to remove total dissolves solids(TDS) in water. It means 3 litres of waste water for every 1 litre of drinking water. and don't waste that waste water u can use it for utensils washing. thanks for watching my channel.
Koncham TDS bolt ni tight cheyandi appudu waste water ekkuva vasthundi. 1 leater pure water ki 3L waste water vachetattu bolt ni tight chesi set cheyandi. Alage 6 months ki okasari filter candle change cheyandi manchi result vasthundi. I hope u understand. Thanks for watching my channel. Stay tuned my channel
Bro don't loose TDS bolt so much . If u loose so much then water flow is increased along with TDS level.if water flow is fully increased TDS level also increased that's why u facing that problem. "so loose that bolt little bit only" now once see water flow nd TDS level. I hope u understand. Thanks for watching my channel
bro TDS level bolt ni video lo choopina vidanga koncham loose cheste waste water thuggi filter fast ga ninduthundi. TDS level bolt ni water taste ki thaggatuga loose cheyali ekkuva loose cheste water taste maripothundi.tds lavel bolt ni ela loose chayalo ee video lo choodu. i hope u understand. thanks for watching.
bro first tap valve on chesara ledo chek cheyandi aa valve on chetene "water " aa filter loki velthundi .valve 'on' lo unna water flow raledante i think mee water tank nunchi water flow pressure thakkuvaga undi undavachu. filter ki input water pressure thakkuvaga unte filter agipothundi. so contact ur filter mechanic. i hope u understand. thanks for watching. 2nd check mee water tank input water pressure The RO water purifier works only when the input water pressure is up to a certain pre-defined level. In case the pressure drops below this value, the low-pressure switch cuts off the RO machine.
As shown in this video at (click on it)👉 1:14 little bit loose that TDS screw and once check pure water "flow and taste" . If"taste" nd "flow" of pure water is good then leave it as usually . If pure water flow is increased then automatically waste water will reduce Note: Dont loose the screw "more" because water will be "taste less" so Note this point. So loose that TDS screw little bit only. I hope u understand. Thanks for watching my channel.
NOTE :"Loose the screw little bit
only." If u loose more for
increasing water flow
it will become taste less.
TDS LEVELS :
50-150:(excellent ) most suitable nd acceptable for Drinking water.
150-300:(Good) acceptable for Drinking water .
Less than 50: Unacceptable for drinking water because of lack of important minerals in purified water .
I set my tds to 50 but after some days it falls down like to 30 or 25 it happens every time ? What is the problem i have changed tds controller too
Once set ur purifier TDS level between 90-150 as as shown in video by loosing TDS bolt (screw).
And check after few days is it b/w "50 -150": (Excellent ) then it is most suitable nd "acceptable for Drinking".
If it is below "50" then pls contact any purifier mechanic.
Less than 50: "Unacceptable" because of lack of important minerals in purified water.
150 - 300: Good - "Acceptable for Drinking"
I hope u understand
After many month Inlet water for filling the tank is reduced day by day takened too much of time like droplet 💧, for That i adjusted tds now i feeling some taste is too much difference wt to do?
Note :Loose the TDS Bolt little bit Olny.
If ur purifier is above 1 year old then u need to change these one to get water flow nd pure water.
1)U need to change pre filter every 3-4 months. which is outside of purifier tank
2)And change Sediment filter every 6-12 months. which is inside the purifier
3) And change Carbon filter every 6-12 months. which is inside the purifier
4) change Ro membrane every 2-3 years.
First u need change first 3 filters if u got high pressure water no need to change 4th one .
Or if u got same problem then change Ro membrane also. Finally u get better results. OR Consult ur purifer services man.
🔥🔥(67%off)Buy Best Water Purifier Candle/Pure Sediment Cartridge candle
amzn.to/3jQ2uyn
I think it is helpful to u
I hope you understand.
Thanks for watching my channel 😊
Anna mineral cartirdge install chesukunte mineral water vastaya
Bro nenu 8 months Indi purchase chesanu purifier tank full avataniki 2 hours padutundi ? Slow ga vastunnai pure water
Only adjusting might solve the flow but the purity/water filtering would impact its quality.
Purity of water depends on filter candle nd maintenance nd its flow also.if we use slow water flow purity will becomes increase because more impurities r removed in that time.
I hope u understand.
Thanks for watching my channel
Anna... Excess air velipote filter lo... Ella remove chestamu???
Small dought bro can slove the problem purify eppudu on cheshi pettali ha off chesi undaliaha
Night sleeping time lo on chesthe manchidhi because night time lo water ekkuvuga use chyaru (bathing,dish washing..etc)appudu water flow ekkuvuga untundi so purifier lo unde moter ki elanti problem radhu.so night sleeping time lo on chesthe water fill ayyi automatic ga off avuthundi. So morning lesi switch off chesuko vachhu. Mee tap lo water flow speed ga unte morning cooda on cheyavachhu.
Meeku addham ayindi ani bavistunnanu.
Thanks for watching my channel. Stay tuned my channel for more videos.
Ro membrane install cheste mineral water vastaya
Every 2-3 yrs RO membrane ni change cheyali alage bayata unde filter candle ni every 4-5 months change cheyali appude mineral water manchiga untundi.
I hope u understand
Thanks for watching my channel
what is the flow ratio of pure and waste water? 1:2 is OK?
should be maintain 1:3 ratio of pure and waste water to remove total dissolves solids(TDS) in water.
It means 3 litres of waste water for every 1 litre of drinking water.
and don't waste that waste water u can use it for utensils washing.
thanks for watching my channel.
Thank you gnetlemen
@@shahnavaz3283 60 :40
Drinking TDS should 50-200
Water beautiful chok problem
Hi bro
Speak in hindi or English.
Bro rejected water ekkuvaga bayatiki ravatledu..,
Koncham TDS bolt ni tight cheyandi appudu waste water ekkuva vasthundi. 1 leater pure water ki 3L waste water vachetattu bolt ni tight chesi set cheyandi. Alage 6 months ki okasari filter candle change cheyandi manchi result vasthundi.
I hope u understand. Thanks for watching my channel. Stay tuned my channel
FR check sesukondi
Bro Same Problem But when I speed Up the water flow using TDS bolt TDS increase to 900 why bro
Bro don't loose TDS bolt so much .
If u loose so much then water flow is increased along with TDS level.if water flow is fully increased TDS level also increased that's why u facing that problem.
"so loose that bolt little bit only" now once see water flow nd TDS level.
I hope u understand.
Thanks for watching my channel
I too had the same problem but konchem loose chesna TDs is increasing, what to do
@@SuperVamshi007 I replaced Membrane My problem is solved
@@kishorjanjal7454 15 days back I changed all the filters
@@SuperVamshi007 My problem occurred after changing all filters which I ordered Online. I LATER Found Membrane If Faulty so I changed locally
Replay
Bro tell ur doubt in comment.
If i know that i will explain 😊
Mobile nember
Bro wast water ekvo pothundi
bro TDS level bolt ni video lo choopina vidanga koncham loose cheste waste water thuggi filter fast ga ninduthundi.
TDS level bolt ni water taste ki thaggatuga loose cheyali ekkuva loose cheste water taste maripothundi.tds lavel bolt ni ela loose chayalo ee video lo choodu.
i hope u understand.
thanks for watching.
@@youthworldTH-cam thqu bro
welcome
@@youthworldTH-cam bro loses chystay water ravatalaydu ami chyli
bro first tap valve on chesara ledo chek cheyandi aa valve on chetene "water " aa filter loki velthundi .valve 'on' lo unna water flow raledante i think mee water tank nunchi water flow pressure thakkuvaga undi undavachu. filter ki input water pressure thakkuvaga unte filter agipothundi.
so contact ur filter mechanic.
i hope u understand.
thanks for watching.
2nd check mee water tank input water pressure
The RO water purifier works only when the input water pressure is up to a certain pre-defined level. In case the pressure drops below this value, the low-pressure switch cuts off the RO machine.
hindi me bol bhai
mera ko hindi ny aathe bhai.
me telugu vala🙏
@@youthworldTH-cam okay bro...No problem
thanks for understanding nd also thanks for ur support bro.
Waste water going out more what shall I do please replay
As shown in this video at (click on it)👉 1:14 little bit loose that TDS screw and once check pure water "flow and taste" .
If"taste" nd "flow" of pure water is good then leave it as usually . If pure water flow is increased then automatically waste water will reduce
Note: Dont loose the screw "more" because water will be "taste less" so Note this point.
So loose that TDS screw little bit only.
I hope u understand. Thanks for watching my channel.