Macerating Toilet Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 พ.ย. 2024

ความคิดเห็น • 18

  • @Needdeen99
    @Needdeen99 3 หลายเดือนก่อน +1

    Well done mate. I struggled so much trying to put the rubber on to the toilet at 11:07 minutes.

  • @44people441
    @44people441 ปีที่แล้ว

    Nice job!

  • @thelmadelacruz7664
    @thelmadelacruz7664 6 หลายเดือนก่อน

    Do you need to tap it to the water pipe line andwhere the liquid waste will go do you have to tap it in which pipe? Just curious this is good in the garage but we havent water or waste line to tap just electricity

  • @michaelsawyer7619
    @michaelsawyer7619 6 หลายเดือนก่อน

    You don't need to vent this?? I am running a quote on installing one of these. I've only put in the saniflo but those clearly require a vent.. 🤔

  • @zackallen7781
    @zackallen7781 ปีที่แล้ว

    How was this vented? Did the pump itself need to be vented, or any of the fixtures going into it? Would it work with a wet vented system?

    • @timpalmer-logstolumber1999
      @timpalmer-logstolumber1999  ปีที่แล้ว

      The installation plans show the pipe coming from the sink drain without a p trap and it does not have to be vented. I have not used it yet because the plumbing is not complete, the owner is not in a big hurry to finish. I will get installation instructions from owner and update.

    • @geoffreyshafto3303
      @geoffreyshafto3303 10 หลายเดือนก่อน +1

      There is a bunch of problems with his installation and according to other stuff Ive read it has to be vented because it pulls air to operate, so you cant use an air admittance valve

  • @E_J_R_giges
    @E_J_R_giges 7 หลายเดือนก่อน

    Is this the Superflo model? Does your pump cycle several times to eliminate waste or just once or twice? Installing ours and surprised at the number of pump cycles per empty.

    • @timpalmer-logstolumber1999
      @timpalmer-logstolumber1999  7 หลายเดือนก่อน +1

      Yes it is the Superflo. I don't know about the flushing. He didn't have the water turned on when I installed it.

  • @ralphstearns9726
    @ralphstearns9726 8 หลายเดือนก่อน

    Does it have to be vented?

  • @rameshphaskanram4714
    @rameshphaskanram4714 10 หลายเดือนก่อน

    What size concrete drill you use

  • @kennyg3192
    @kennyg3192 9 หลายเดือนก่อน

    Where is your GFCI receptacle?😮 I’m a plumber, a master plumber and I hope that your vents is going out by itself and not wet vented must be in a dry stack and not a scooter vent.😮 it looks nice and if you use pipe for the discharge line it’s got to be 45s not 90s with a piece of pipe in between each 45 for some reason it works better than a long radius 90 depending on what system you buy also😢

    • @timpalmer-logstolumber1999
      @timpalmer-logstolumber1999  8 หลายเดือนก่อน +2

      The GFI is by the sink. This model does not need venting, and the instructions say to use two 45s

  • @ralphfisher5516
    @ralphfisher5516 ปีที่แล้ว

    What size pipe you use