What an amazing result! I love the engineering these kits go through. I would love to see something like a motorbike, there is the Kawasaki Ninja H2R or Honda Africa Twin both made by Tamiya that I would like to see built, all high quality with awesome detail. But that's just me, I am just suggesting.
Now I will make a motorcycle. Please keep watching! H2r is my favorite motorcycle. I'll collect and make data. I will upload the scooter first this year.
Did you somehow smooth the laint before putting semi gloss varnish? Since I'm building same kit and I've got problem, where paint is not smooth enough even when I thin it down heavily and use low pressure
I am currently building this Mustang but I am having a problem with the seam lines. I marked them and removed them by sanding. I used two layers of primer but when I finally paint the body the seam lines appeared like grooves on the plastic. Any ideas? Thanks.
Make it scale Nice so you have staple for your builds. Is the 290 primarily what you use for body’s? I’m the market for something good quality that can spray wide for body’s and potentially fine if I need to knock out some detail painting. I currently use a Iwata CR and spray cans
Fantastic build! I'm wondering where you got the (I'm not sure what it's called) netting? The part that's hung to the left of the driver's seat. It's on the actual car, and I've never seen a scale version of it.
![[Full build] Ford GT Make it 1/24 Scale step by step build (Tamiya)](/img/n.gif)
Excellent build. Awesome attention to detail. Subscribed.
Thank you for watching and subscribing.
Nice build!!! 👍👍👍😉
Love your builds!
Awesome! I can't wait to build mine! Lot's of work!
Thank you for watching! Try making it. It's cool.
Amazing build. Loved every part. Keep up the good work !!!!!
Thanks for watching and comment!
It looks amazing. Top Job. 👍🏻
Very nice build you done a great job 👍
Thank you for watching. It was a new product, so I had fun working on it.
Top class modelling!
What airbrush is that the pattern when you spray the clear is perfect.
Nice paint job well done.
Beautiful paint work!
@Philip Nickolas no one cares troll
Super clean build.... looks great
Thank you for watching and comments.
광택이 어마어마하네요...
저는 저렇게 광이 나지 않던데...
보니까 마감제를 여러번 올리시네요...
역시 정성이 들어가야 진정한 광택을 얻을 수 있나봅니다..
아 저는 자동차 보수용 우레탄 클리어을 씁니다. 락카로 마무리하고 시간이 흐르면 광이 죽어서 아쉽더라구요
Make it scale 아 말로만 아니 글로만 보던 우레탄 클리어로군요... 이래서 에어브러쉬가 있어야 되나 봅니다.
개인 만족으로 시작한건데 욕심이란 점점 커져서 끝도 없는 디테일업에 목을 메고 있네요 ㅎ 모형 참 어렵다 생각되네요
Gorgeous
What an amazing result! I love the engineering these kits go through. I would love to see something like a motorbike, there is the Kawasaki Ninja H2R or Honda Africa Twin both made by Tamiya that I would like to see built, all high quality with awesome detail. But that's just me, I am just suggesting.
Now I will make a motorcycle. Please keep watching! H2r is my favorite motorcycle. I'll collect and make data. I will upload the scooter first this year.
僕もです
I've built the Kawasaki H2R it's a fantastic kit, and builds it amazingly
Superb Mustang GT4, excelent kit .
Great work , superb painting and decals...👍🏆🥇
Thank you for the compliment.
How did you get such a perfect finish without needing to wet-sand?
There is not much difference between wet sanding and dry sanding.
I've just started my build of this kit, yours turned out beautiful, nice work, subscribed!
Thank you for watching and comments!
It's a great kit. Good luck!
Absolutely beautiful build my friend. Excellent job done. Thanks for sharing, keep up the great work.
Stunning!
Thank you for watching and comment.
What did you make the head restraint net out of
Very good 👍👍👍👍👍
Looks immaculate.. what make and type was the topcoat please
I close with urethane. It's tricky, but it's high glossy.
How do you touch the decals without them falling apart? There water based right?
Wet it with water, glue it to the desired place, remove moisture little by little, and apply it slowly with a mark softener.
@@Makeitscale Ok Thank you
What is the purpose for a semi gloss clear then a urethane over it ? Just curious.
Rather than putting urethane on a smooth surface, putting urethane on a rough finish increases adhesion. It is an act to prevent possible problems.
@@Makeitscale gotcha. I'm learning so that's good to know.
Kindly what airbrush are you using!?
I uses Richpen no.3, richpen gunpiece GP-2, and Urethane painting uses mr hobby ps-290.
Great build! What paint/color did you use on the mirrors?
I recommend MolotowTM Chrome Acrylic Marker.
Nice!
How do you glue painted parts
Loctite
Did you somehow smooth the laint before putting semi gloss varnish? Since I'm building same kit and I've got problem, where paint is not smooth enough even when I thin it down heavily and use low pressure
There can be many problems.
The paint may be old, or the ratio to the thinner may be a problem.
Beautiful car
What kind of paint and air pressure do you use for the airbrush?
lacquer painting : Richpen no.3, richpen gunpiece GP-2 (1.5bar)
Urethane painting: mr hobby ps-290 (2.5bar)
What did you apply with the small brush?? Is it a type of glue or adhesive???
I don't know which part you're talking about, but it's probably
Désolé trop de PUBS :_( mais super vidéo ;-)
I am currently building this Mustang but I am having a problem with the seam lines. I marked them and removed them by sanding. I used two layers of primer but when I finally paint the body the seam lines appeared like grooves on the plastic. Any ideas? Thanks.
It happens because the paint thinner melts the surface. Dry, grind, thin and spray several times. It repeats again if you sprinkle it thickly.
Nice work! Subscribed your channel :-)
Thank you for watching and subscribing.
すごく好みです
Looks awesome! What kind of airbrush do you use if you dont mind me asking?
I uses Richpen no.3, richpen gunpiece GP-2, and Urethane painting uses mr hobby ps-290.
Make it scale Nice so you have staple for your builds. Is the 290 primarily what you use for body’s? I’m the market for something good quality that can spray wide for body’s and potentially fine if I need to knock out some detail painting. I currently use a Iwata CR and spray cans
@@jamieroseman4429 The Iwata CR and spray can be a good choice. 290 is used for urethane. It is good to buy equipment while making a lot.
superb
Can you tell me where you et the carbon stickers QAQ I really like em
I applied it to the Bonnet. And watch Porsche 918 and Mustang GT4.
Make it scale thx man I’ll do it
What PSI are you spraying at? Also, what tweezers are you using?
Airbrush used:
lacquer painting : Richpen no.3, richpen gunpiece GP-2 (1.5bar)
Urethane painting: mr hobby ps-290 (2.3bar)
Richpen and Iwata products are recommended.
tweezers write anything.
@@Makeitscale Thank you! Your work is excellent
Beautiful build buddy, awesome job. Subbed your channel. KUTGW.
Thank you for watching and comments!
Fantastic build! I'm wondering where you got the (I'm not sure what it's called) netting? The part that's hung to the left of the driver's seat. It's on the actual car, and I've never seen a scale version of it.
Oh! ha ha:) It's made by cutting off the electric tape.
If there were more data, it would have been more sophisticated.
It's too bad. :(
@@Makeitscale So, you mean you scratch-built it from electrical tape? I think it looks great! And thanks for the reply.
Oh sorry ! Electric tape means insulating tape. :]
magnifique
👍
That airbrush is no joke son. What the hell is it, cause it isn’t some iwata lol
I use a richpen. Iwata is a little better.
Make it scale I’m gonna look that up. I liked it. That gravity feed well was big enough to hold a quart of paint. Lol
😮😯😲
you are spraying too thick layers. too wet. apply is more dry then the result will be better :)
It appears that I have bitten off more than I can chew 😳
Even the decal on the door was not cut (
이거 죄다 영어로만 적어놔서 머라카는지 하나도 모르게써오... 한글을 버리실라우?
いちいちBGMがうるさいな
Beautiful build! What semi gloss paint did you use? Thanks🙌
Do you put cement or glue on before putting carbon fibre decals?
It is a decal glue and softener. If there is a bend, use it.