I found the ULTIMATE Car Interior Ambient Lighting Kit!
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Hey everyone, In this video I'll be covering a new and improved ambient lighting kit that I discovered. We'll be installing the kit on our 2008 BMW 335xi. As you may know, I've reviewed and installed 2 different kits previously, and this one is hands down the best version so far!
------------------------------------------------------------------------------------------------------------------------
Buy this Ambient Lighting Kit here: azizdesignshop...
--Most noticeable differences: ----------------------------------------------------------------------
- OEM Look
- Slimmer Fiber Optic Cable
- Fully integrated LEDs (instead of one bulb powering fiber optic
- 5 times Brighter
- Fully RGB (controlled either through remote or APP),
- Comes with footwell lights, door handles, and glovebox.
- ZERO Hotspots
-------------------------------------------------------------------------------------------------------------
Subscribe to my TH-cam Channel Here:
/ @azizdesign_
✅ Questions? Let's Connect:
Instagram: @azizdesign_
Tiktok: @aaazizzz
Working on a car outside in the middle of winter ..... you guys are twice the man I am ....😂
Outside his garage, In the snow too 😂
Credit for doing this in the middle of winter in the cold. I would wait til spring. 😀
soft
What a season, what a car and what an amazing implementation. Thoroughly Enjoyed It 👍
@@sabithpkcmnr thank you 🙏🏽
Thanks for this video. I have leds in my car but this kit is sick. I can't wait until it ships thanks again!
So I installed those on my e92, looks very good. If any of you considering to do this to e92 I have a tip, so basically you dont need to feed the cable from the door to the fuse box, its wireless controllers, All I did I connected cables to the original orange ambient light cables that my e92 had. Also another tip, if you do not want to drill big hole to feed the ambient light in door, you can drill very small hole, what I did was, i took my ambient light to a local phone repair shop and asked them to dissasemble the red connector, they did it That way that after disassembly I can just put back pins easily, so I drilled a very small hole and put the cables one buy one, and after I just connected those cables back, maybe sounds complicated but its very easy trust me. I was very confused with everything at first , because it was my first time doing such a thing, so if you have questions you can ask in the comments and I can try to answer to you :)
thanks great tip, you could have done a video of your installation.
@@coolissimo69 Yes, but I was figuring everything out because it was my first time, If I will install it again in one of my friends car I will definitely do a video :) Anyways if you have questions you can ask here I will try to answer ;)
@@bazaras2520 thanks will do that mate.
Where did you connect the main controller?
hey bro i have a few questions, because i want do install it on my e93.
1. where did you get power from, because i only have 1 12V in the center console and reaching it without looking ugly or drilling isnt possible
2. how did you connect the back footlights an back lightstrips, and is there somewhere a power cable i can connect to?
3. you said you connected yours in the door to the serial ambient light poweroutlet, i dont have them, do you think i can connect them to the window ?
4. i ordered the kit with 75cm lenght for the doors, is this enough for the pretty long e92/93 doors, does it still look good?
ill be very grateful if you could help me out
TRON MOVIE!! 😂😂😂
Was totally thinking Tron, as well! Looks awesome!
Great video! as i prepare to move from Ontario to Alberta i realize now just how much its gonna suck to do car project stuff in winter
Thanks dave, and yes definitely worth investing in a garage heater!
Great video, nice examples and tips to install. Looks easy to do. Two questions for you, did you get the 18-in-1 kit or 20-in-1? Also is there a music/sound sync option?
Thank you. I got the 18 in 1 kit, and yes there is a music option i believe but its not as good as i thought it would be
@@Azizdesign_ Any way we can get a TH-cam short or video of the example? Thank you, bro! 🙏
Awesome. I just put in some non changing el wire and changeable floor lighting with an deep blue overhead door light. I also had reflective tape on the outside, but my Dad made me pull that off 😭.
Can you do a detailed installation video? It would help a bunch!
check my latest videos
My suprise ! Is your doing it while snowing my respect never stop the grind
Love your work
can you please show a full tutorial how to install ambient lights on a E class w212 2015 on the current ambient lights places (doors, dashboard) Thanks you
Thank you, yes I will consider it for a future video
thanks for the explanation and the good video, but the only thing i didnt understand is, why didnt you install the lightning kit in your garage :D ?
Can you do a detailed installation video please ?
Yes, Please
Have you tried kits from other websites in the past? Or has your experience just been watching this website's kit evolve and improve?
I have tried three separate kits prior to this one, each from different suppliers
@@Azizdesign_ so which kit did you use? I see the link for allie express. But I thought it was a better one
@@levilee6488 link in the bio, the first one
Can’t believe you’re just installing this in the snow bro. Couldn’t you have found like somewhere undercover ahah
Bro, when I get my car, I am so gonna so this lol
My dude couldn't use the garage or a eazy-up for this work during the snow season? 😂 Savage
Dedication 😂
u should change thee bulb behind your dash to match
I really thought these were going to be the Type 2 or Type S brand car lights. I just have basic Govee lights since I have those smart lights in my home as well. I haven’t taped any of the 4 strips down yet because really don’t know where to put 2 others since I have a true little coupe roadster. But I really want to do lighting like this in the trim but my car is brand new and don’t know about splitting the trims but does look really good and OEM style
So how is this system holding up for those who have installed it...? Any problems...?
I think I am missing something what is the make and model of this kit it looks brilliant Bear Hull UK
It’s a universal kit which works on any car. The link is in my bio
Could you post a full install for those that want to do it themselves and not have to 0ay someone to do it
Installation varies for each car, all u need to do is connect the power wire to the fuse box, attach the ground, hide wires, and fit the fiber optic beams
@@Azizdesign_ thank you i can’t wait for them to get here
@@aramis762 No problem. Happy to help!
@@Azizdesign_ how exactly do you connect to the fusebox? are there empty entries that you can insert and then add a fuse?
@@fontexstudios yes exactly! you should be able to find many open fuse slots which can be used. Nearly every car has them
Bro you need to make another video asap I bought these and now I don’t know what to do cause this video has 0 details just random clips
Message me on instagram and i’ll try to help
Shout out to the guy hold the camera stick. Must've been cold asf.
happy you installed on a BMW so I can see how it would look on mine. two questions. does it still look good and how hard would the install be for an amature. example, I DIY install the Pemp head unit no problem.
Yep, still looks great. It’s not terribly hard to install, just some patience and time
why he waveing his hands around like a crazy person :P
So will it automatically turn on when the ignition is orrr is that a seting or how does it work ?
Where do you draw the power from ?
You could have put the on / off button in a little better place in front of the gear stick !
I like the idea and what it can do - what you charge to install one - Edmonton here
Very cool like a futuristic car 💥💥💥💥💯💯💯
I was wondering how it was wired thanks alot
Check my latest video
Hi! My only question is where did you connect both doors? Main control box is in fuse box, but what about 2 control boxes for doors?
Hey bro did you notice the driver side foot section is a different color from the passenger?
Haha yes
@@Azizdesign_ I recently just installed my 18 in 1 kit bro but I held off on the handle lamps and floor lamps I have a question for you if I wanted to add more strips of light do you think I can just buy their led strip without the control box? Or should I just buy a 10 in 1 and have 2 main boxes
@@lifewithjulez32 shoot me a dm on IG i might be able to get you just the strips alone.
Great job bro.
Does lights remember last selected color/brightness combination, or do I have to reselect every time I start the car?
It remembers the last setting yes. No need to keep readjusting
i really want to know if this one on first power does some stupid start animation or if it just reverts to the last chosen colour, thanks!
Nope it doesnt!
Purchase and took in a local car stereo - audio shop, cost me $700 for install it! Tough install!😂
Wow, that seems pretty high. I was going to take that same approach because I don't want to go through all that trouble. Now I'm having second thoughts. Just curious, what city/state are you located in?
God damn you got ripped off even for the absolute best quality Install of those lights it’s should be no more than 300-400 as anyone skilled wouldn’t need much time
this is dope, my guy start a business installing this!
Thank you bro! Haha i’d love to unfortunately my fulltime job occupies much of my day
CHECK YOUR INSTAGRAM! :D
Both promo codes are not working btw! This is on Wednesday after cyber monday but they are still offering small discounts. I also had a question on how hard is it to wire? The ground can be connected to anything that’s exposed metal? Also the power you said has to be a fuse connected to the fuse box? Also the leds connect all wireless so you won’t have to run cables everywhere correct?
Thanks for letting me know victor, I will contact the supplier and see if I can fix that. As for wiring, it's very simple. the ground connects to any exposed metal body component of the car (try finding an existing ground), and the power connects into the fuse box (just insert it into any open slot). They are all wired but not connected to each other hence the Bluetooth functionality (if that makes sense) Nonetheless it's a very well built kit
@@Azizdesign_ perfect! I watched your other video with the thin strip led and I installed one strip but i don’t want wires hanging everywhere. Especially when i do the doors! So that means I won’t have to run any wires anymore right? Only the ones that connect to the strips themselves?
@@IPL_VIC Yes that's right! the wires are only connected to the ones with the actual strip. Unlike the previous kit I reviewed where everything is wired together, even modules etc.
@@IPL_VIC
You've probably already installed the kit, but if not, don't run any power wires from the battery, just tap into the + and - on the window switch on the doors.
This reduces wiring, and its how the kit was designed to be used.
The sub controllers are wireless for this very reason.
@@VeganBytes interesting, I actually haven’t installed yet! Weathers been too bad these last couple months lol. I will get to it this spring though for sure. Thanks for the tip. One question though, i know how to remove my window switch controls but I don’t think there’s any exposed wiring. I will have to check of course. My cars an Infiniti G37 btw
I alibaba and Amazon I don't see the one you are showing in the video
Check link in the description
Just ordered this for my E92 , is there any chance you could do a more detailed install Vid?
Hey jason, shoot me a dm on instagram if you need help with the installation
Can it easily be moulded around bends. I’ve found with some kids they don’t bend very well and end up popping out.
It cant bend 30 degrees max, anything more and it would crack the plastic housing. Also if you stick it in well enough, it won’t pop out
Just bought em 👍🏽
Lol I was watching this video and realized you are in the same city as me
I am generally against this sort of thing but this looks 🔥🔥🔥
Thank you my friend
Where to buy
I'm having a hard time finding one that isn't too much. I think this would look okay if it were only the strips on the door
can I install without taking the door off? lol I don't know really know how to do these things.
Haha unfortunately not, if you want to do the doors then you must remove the plastics
pro video, motivated me to get some now haha XD
Thank you 😊
thanks, is the link to the kit still available on aliexpress?
Yes check video description
Do the lights just turn on when the car gets turned on/unlocked, or does it have an animaton
Yes installation video pls!!! 😢
Coming this weekend 👍🏽
Just received my kit… quick question: how do you get the plug on the inside of the door? It’s not like the other kit with the bulb attachment.
You have to feed it through using a coat hanger, remove the rubber wire grommet and feed it through it. You will also have to remove the kicker panel to find an opening
Calgary boy eh? me too
What's the name of the kit.and were do l . purchase it.
link is in the bio
Do you know if they have a kit for a 09 chevrolet avalanche, if so where can I buy this kit got to have it
Kevin, this is a universal kit it should work with nearly every car
Great 👍 so I would like to purchase the 18-1 set where can I purchase
@@kevinalmore1892 link is in the description
I would think it might get annoying so bright.. when dimmed down is there still ZERO hotspots??
Yes absolutely zero hotspots! Even at its lowest setting
Looks perfect.
Anyone know if its the $13 one or is it the other ones?
Thats just a single light. The other ones are actual kits with different stuff. The "20 in 1" has all of it.
Name of the song at the intro?
It looks like these are only good for panels that are straight and don’t have sharp bends.
Correct ☑️
Hi I bought that kit and it came without a wiring harness and also the main box to plug in everything To get power to it I was just wondering what was the price of your kit that had everything in it
Hi brian, please contact the supplier. You should have received the main relay box (everything u see in the video)
Hello, I have a question - can we connect those Symphony LED's as negative pole to the car housing in two doors. In my car it seems that in front doors we have positive and negative cables, but on the other hand in back doors we do not have them (there is only positive cable). So thats the question, is there any risk in matter of connecting back door symphony lighting to the car ground which woduld not go straight from the negative cables? Any help appreciated, Thanks!
It should not matter, as long as its a ground ur ok. What does matter is getting 12v for the positive wire
@@Azizdesign_ Thanks for reply, but one more question - if after connecting LED's as I described, there is no other option than connection to the car chasis "which should be ground". My questions are motivated by the fact, that in instruction for the Symphony kit, they are writing as follows: "taking negative pole from the chasis is prohibited"... Thats why I am a little bit confused :P
One of these modes that are beyond my understanding.
Modes or mods?
@@Azizdesign_ Mods. Auto-correction went wrong ;)
does the whole kit run on 12 volts?
Correct
Can you drop the intro song?
cassie - me&u wtchcrft remix [sped up]
Please drop the name of intro music , bro !
cassie - me&u wtchcrft remix [sped up]
What would be the price to install?
Depends on your local shop rates, good install takes 4-6 hours
@@Azizdesign_ yeah..was curious estimately how much would cost if anyone knows.
Don't like how it's missing a piece next to the I drive screen would have just done the doors or skipped on the upper light that flows to the I drive screen
Yeah i get you, we did this on my friends car and he preferred it this way for some reason
Hey bro I’m from suburbs of chicago and it looks like you are too. I want to do this to my jeep is there anyway you would do this as a service?
Sorry man im based out of canada actually
I have a infinity q50 and I don’t know what size it is
Would you be able to lower the brightness ?
yes you can
I’m boutta have downtown New York City in my civic
🤣
Do you happen to have the name of the app.. to control the lights vea smartphone (Android) as mine came in with no instructions
I-AT LAMP
Do you know something of similar quality and complexity for F30?
This is a universal kit, it should fit in almost any vehicle, but you have to get a little creative
Where can I order this kit? I need it for my 2017 impala
Links in the bio
I wanna do this on my chaser
Do it up! Will look sick
Where did you the the power for the door light strip from?
I wired it to the main power source (the one that plugs into the fuse box)
Can you dim the lights ?
Yep!
@@Azizdesign_ I ordered them today! I'm praying a toyota dealership will install them for me. 🤞
@@CajunAdrienne message me on instagram and i’ll my best to help you
@@Azizdesign_ did you ship my lights? Does it take long to ship?I haven't received them yet.
@@CajunAdrienne shoot me a dm on instagram and we can have a look
can this be cut at any length? I might want to run this on my supra
yes it can! you will notice when you cut it, the end of it might change color. That is because there's alot of small tiny leds in the strip. In order to fix this, you just cut a little more so that it reforms to its original color.
What is the kit called
The kit can be found here: azizdesignshop.ca/
link doesnt work anymore :( any other link?
The kit can be found here: azizdesignshop.ca/
What's this kit called can u send me link
Link is in the bio!
Look out for the seller, i have order 3 sets only received one and the seller stated he shipped 3.
Now im waiting for refund from aliexpress.
Also i have installed it in my E91.
Would recommend the symphony set also with the tinted version so its all Black, less visible.
doing that all outside and on snowy day are you ok? omfg lmao
Gotta stay dedicated for my subs innit
What wrap is that for your interior trim
Not a wrap it’s like that from factory m sport
Which one did you get 20 in 1 or the 6 in 1
Got the 18 in 1!
what’s the name of the kit and where can i get it
link in the bio
Bought this set. TWO HUGE things this dude fails to mention people should take note of before buying:
1 - the door handle lights are NOT 1:1 colouration of the strip LEDs. The colours vary and they’re a little off from eachother unless they’re at extremes. (e.g. full red) But even at full blue will be slightly different. Which is kindve ridiculous since this whole set is nearly $200 if you get the full set.
2 - To power the main control box it uses a fuse tap which is fine; that’s plug and play. To power the Door LEDs however you need to splice into the power windows (or whatever you can get into that is 12V) and basically Y split it. Which does require wire stripping as well. Also, quite a tedious process; using a multimeter to find the correct voltage output and make sure the same power source is not on while the car is off too (so it doesn’t drain the battery). It is NOT SIMPLE as the video states.
I was extremely lucky to have a friend that knew how to do all this but i would not say this kit is for everyone. Only for people who are tech savvy with car electronics. The finished product once installed is very nice looking but no, it is not a simple process by any means at all.
What app did you download bro for that?
The app name and details are in the package once you purchase the kit
Looks like work. Nice though.
It’s worth it promise
How do I add your promo code?
Is there one for a 2013 3 series 328i
This is a universal kit, it will work with any car
Hey this optic cabels can work direct on 12 v? Or need this box
Hey, unfortunately it does not work through 12v unless you made it work. Only way to power this is through the fuse box
@@Azizdesign_ ah to bad,i not whants mess all car because lot of wiring then i think just connect fiber optic in my oem wiring for ambi light.. :(
Did u cut the 110cm for dash trim area?
yep that's correct
This shits fyeeee
Thank you 🙏🏽
are you in the GTA can you help me install mine?
Sorry im based out of alberta
What does the remote do by the way?
The remote can manually adjust the colors, and turn it on and off
@@Azizdesign_ thanks
Amazon or ebay link? I cant wait for aliexpress too long
unfortunately its only on ali express
@@Azizdesign_ does it have gradient effect with mixed colors? 75cm is too small for my door, can you align 2 strips seamlessly?
Can i get a link to this kit?
The kit can be found here: azizdesignshop.ca/
What size kit did u use in the video
I used the 18in1
too bad those door ones are so short-not even reaching to the end of the door