Hate Photoetched? Here is how I do it.
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2024
- Using Photo-Etched model car detail pieces can be challenging but hopefully with a couple of helpful tips you can tackle using them easier. Follow along as I clip, trim, paint, polish, attach and bend PE pieces to my current project.
For the TH-cam Algorithm: Tamiya PZY Alpha Model 1/24 scale plastic resin model car kit Photoetched PE Aoshima Hasegawa Fujimi 1/25 AMT Round2 Revell Johan Mokei OMG HPI Luka
Follow me on social media:
Facebook James Tester
Instagram ScaleModelExperiment
Email: ScaleModelExperiment@gmail.com
Thank you everyone for watching,
James - แนวปฏิบัติและการใช้ชีวิต
I'd like to offer a few tips for consideration when working with PE.
First, get a small piece of 1/4" Acrylic sheet, or alternatively a small ceramic tile. Use these to do your cutting on. This has the benefit of avoiding bending the metal when trying to cut it with a knife, something you will usually encounter if cutting on a self healing cutting mat. The acrylic is better from the standpoint of not dulling your balde as quickly, but it will scratch more easily than the tile. The tile is probably the best overall choice and readily available in any hardware store.
Secondly, when filing the edge of a small piece, use a pair of pliers (as you did), but hold the part closer to the edge where you are filing. It is far less likely to bend the PE part that way.
Thirdly, use a stiff piece of thin wire held in a hobby knife handle as your applicator for CA glue. You want something that will remain relatively straight rather than something that bends easily (such as copper wire). I use a short section of the internal wire from a guitar string. The benefit of the wire is a more precise application of the thicker CA glue. When it builds up on the end of the wire (which it will do), then a small lighter (such as a BIC lighter) can quickly burn the CA glue off of the wire. Avoid the fumes.
Another choice for holding PE is to acquire an inexpensive jewelry gemstone picker. These are usually steel handles with small rubber coated end pieces (on both ends of the handle). They are a little less forgiving if you get CA glue on them, but a bottle of CA Debonder will take care of that.
And finally, it is advisable to evaluate parts before folding for the best order of folding. Sometimes, more complicated parts have to be folded in less than obvious order, so taking the time to evaluate the folds can help to avoid any surprises in this regard.
Those are great tips! Thanks Carl 👍
Perfect timing! I'm going to be using some PE seat belts on an airplane kit for my club. It'll be my first time, but a fellow club member gave me some advice for them. I'm surprised those tiny parts didn't (as our British friends say) "ping off."
Awesome JD, I'm glad to help. The sticky film on the back helps keeping the parts from flying when you snip them.
I've made 'friends' with photo-etched accessories over the last couple of years! The game changer for me was getting a good photo-etched cutter, needle nose tweezers and in most cases using some type of canopy glue.
Thanks for the tip Johnny. I really do need to get the heavy duty cutters. I prefer rhinestone adhesive myself where there’s a chance to make a mess gluing something down.
Thanks for the video and tips.
I'm old and know nothing of modeling in this century. Thank you for this. Carlsmoot makes some great points here, too.
Absolutely Ron, I don’t claim to be an expert but I do like to share what I’ve learned with the community. It give me personal satisfaction to learn that I helped someone out. Thanks for watching and leaving me a comment 👍
Instead of using a wash for the recessed areas, use a sharpie marker in the color of your choice. Let it dry. Then take a tight weave cotton bud, like the Tamiya ones or the make up ones, dip it in either ronsonol lighter fluid or isopropyl alcohol and dry the cotton bud off on a paper tow so it's no soaking wet, then gently rub the surface. The cotton bud will remove the marker from the top surface, leaving the color in the recesses.
Also if the sand the photo etch before painting the paint seems to hold just a little bit better. (It's so hard to get paint to stick to PE)
Thanks Justin, I not only appreciate you watching but for sharing your tips 👍
One thing you did but didn’t explicitly call out is to keep one side of the protective layer in place - this is to stop parts pinging off and disappearing into the void when you cut them off the sprue/frame.
Another thing you didn’t covering is annealing - photo-etch, especially the thicker stuff, is quite springy, so if a part is to conform to a curve it is often best to annealing it first - heating over a flame and then cooling - this will make the metal more malleable and will bend and curve smoother and keep the shape.
Another thing I have seen with parts like boxes is to solder where the folded edges meet - otherwise, under closer inspection, you have boxes with gaps in the corners.
Those are all good points. I’ve never tried annealing or soldering in the past. I’ll have to give it a try. Thanks for watching and adding the tips 👍
Once again, excellent tips, James. I don't work with too much photoetch, but if I ever do I'll remember these lil bits of wisdom.
Thanks Rob, I appreciate you watching and supporting the channel.
I've been kinda afraid to use photo etch, but I have 2 kits in my stash that have them. I'll use your techniques to try my first attempt at them. Thank you, James!👍
So glad to help Fordman, good luck with your first attempt. Take your time and everything will be fine.
Great video James. I use ultra fine point Sharpie markers to add color to photo etch emblems. I color them while still attached to the fret. then when the ink is dry I carefully polish the top of the emblems with 3000 grit sanding sponge then remove then with a hobby knife or photo etch scissors 😃
Thats a good tip Jim, thanks for watching and sharing.
Great video James! Happy days! 😎🇨🇦
Thank you Peter!
I USE AN ETCH PRIMER FOR THE PHOTO ETCH IT BONDS WITH THE METAL AND ALSO THE GLUE STICKS BETTER.
AND IF YOU ARE USING STEEL PHOTOETCH AND YOU WANT TO BENT IT MORE EASYLLY JUST PUT THE METAL IN THE OVEN SET IT AT 200 CELECIUS FOR AN HOUR LET IT COOL DOWN AND IT WILL BE MORE MALIABLE.
NICE VIDEO ,AND SORRY FOR THE CAPS MY KEYBOARD IS ON THE FRINGE!
Thanks NIKOLAOS 😁 I appreciate the tips.
Haven't attempted photo-etched yet, but I will soon. Thanks for the tips!
Of course Billy, that’s why I put the video out there was to show how to work with it. Good luck with your first try👍
Perfect timing for this video James! My next kit has photo etch and I've never used it before. I was used your white glue method yesterday. Thanks for the help. 😎👍
So glad to be of help! Thank you for your support.
Thanks for the video and tips.
Absolutely Ronald, I appreciate you watching!
Great tips! Thanks for sharing.
Thanks for watching Alan👍
Thanks for sharing have a great week!
Thank you for watching, enjoy yours as well 👍
Thanks for sharing. 🏁
Thanks Nicholas 👍
Awesome video James!!!
Thanks KD, I appreciate you man!
Great video James. Thanks for sharing
Thanks Mike, you rock!
Awesome
Thank you Travis!
Thanks for sharing another how to video with us Mr. James!!👌👌👌👌
Of course Willy, my pleasure! Thanks for watching 👍
Great tutorial..
Thanks Bob! I appreciate you watching👍
Nice video there James, thanks for showing us all the tools and tricks, I'm sure I'll find this helpful for my future photo-etch jobs 👍🏼👍🏼
Do you have any tricks or tips for me? Do you prime PE?
Yes James I always prime the photo-etch pieces with 2k primer then follow with the necessary colour/s. My procedure is similar to yours, cut the same as you then trim off the excess with a Tamiya scissors and finally a lightly sand with a sanding sponge. Finally, a quick sand to the surface, attach to a stick and off to airbrushing 😊👍🏼
Really cool👍
Thank you so much for watching and leaving me a comment!
@@ScaleModelExperiment 🎩
Thank you James always wonder how guys cut that stuff and make it look better
Thanks for watching Horton, PE parts can really make the details stand out on a model car. Although, sometimes the PE parts are too thin to look real. For example window cranks are usually too thin for my liking.
Need to get one of those diamond files. And possibly a wax pencil..i have been using a pinhead of poster tac on a toothpick for picking up small photo etch. You might try removing the photoetch from the fret on a hard surface versus a cutting matt. Works better for me, but its all about what you're comfortable with.
Does it make it easier to cut the PE against a hard surface?
Good video. Like the broad nosed tweezers.
Thanks for watching Don, I bought a variety pack of 8 tweezers and those and the curved pointy ones are my favorites.
FOR SCISSORS I RECOMEND THE Xuron 9180ET AND THE .9180NS ITS ABOUT 40 EUROS BUT IT CUTS LIKE RAZOR!
That’s the one I think my friend had. He would simply cut right to the part he needed like he was cutting decals.
I'm left with those sharp stubs after snipping PE as well🙁
I used to use a sanding stick but found that the Tamiya diamond file works VERY well.
I saw a really good version of those photo etch bending blocks at Haven Hobby. But it seemed like in a lot of applications, how you're doing it would be easier. I have to get one of those pencils. Where did you get it? Great video, James! Great recovery from accidentally placing that photo etch on that pedal! And not editing out shows even at your skill level things can go wrong!
Thanks Tim, I’m doing ok without a PE bender for now but I think I do need a good pair of Metal shears. The wax pencil is from Amazon and they are super cheap. I cut lots of blunders from videos but I left that one in 😂 thanks for watching bud 👍
Well done PE tutorial. Thank you.
Where does one find a 'wax' pencil? The PE wiper arm...mfg'er & supply source if you please.
Thanks for watching. The wax pencil can be purchased from Amazon. The PE wiper came in the kit and required some bending and careful application of superglue. I filmed the assembly of it, but was out of frame for most of the video so I cut it out of the video.
Great Vid. Thanks.
What are your thoughts on metal primer? Brands? VMS vs. Mr. Hobby, for example.
Thanks again for all you teach us.
I don’t use a metal primer. Very thin coats of lacquer paint work fine for me.
James, would a photo-etch grille look like that? I have an older un-built AMT '69 Torino Cobra kit that lacks grille detail. I'm wondering if it would be worth the search to find a P-E grille for it, and what difficulties I'd have with something that big. How would it be mounted in the opening?
Hi Ray, I've found that PE grilles lack the 3D effect (just my .02). Some look nice, but thinning the back of the kit grille so that the holes are open looks better in most cases if possible.
Nice Tutorial Bro 🏆🏆🏆 God Bless 🙏🤗 Gary.
Thanks Gary, I appreciate all of your support!
Great tip by the way what do you use to do your videos with?
Thanks John, I use my iPhone 14 with a camera rig on the desk. Nothing fancy. I edit in iMovie.
Great video, question those pliers seem modified , where can you find pliers with that flat wide edge to bend wider parts like you just did. do you always have to use super glue and can other glue work as well? thank you I appreciate it..
Hi Jose, the pliers are stock. I bought an 8 pack of assorted tweezers and that one was one in the pack. You can always use 2 part epoxy, clear paint or white glue also to join PE parts. Superglue works faster. I use a non fogging type gold from BSI industries. Thanks for watching 👍
Great video. It's a shame it didn't include bending windscreen wipers as I find these are very confusing and combined with super crap instructions, it's a recipe for a car with none at all :)
To be honest I filmed it but I was out of frame for most of the bending so I cut the footage from the video. Next time…
Please use a harder suface when cutting parts off the fret as a soft surface such as the cutting mat will lead to bent/distorted parts, ask me how I know...
Thanks for the tip Dave, I appreciate you watching and leaving me a comment.
I am doing a Revell 1950 Oldsmobile. I have photo etch for it which has individual letters for the word “Oldsmobile” on the hood and the trunk. My problem which I an experimenting with is finding an adhesive which will give me working time to adjust the position of the letters, which will dry clear when set and which any excess outside the letters can be removed. The closest I’ve gotten so far is rubber cement. Any suggestions?
Rhinestone adhesive. It’s water based, holds strong, dries clear and you can remove excess without a fuss.
@@ScaleModelExperiment Thanks!
Never managed this without at least one piece dropping on the carpet and disappearing forever...
haha, I have a hardwood floor in my hobby room. I have yet to LOSE a part.
Hi James,
Do you ever use a primer (etch or otherwise) on your PE?
I do not primer PE parts. I just mist paint them.
Do you ever solder your photo etch? That’s when it really gets fun.
I have not. No thanks 😂. Thanks though for watching 👍
how do you have so much kits, I see a lot on the background or are those only the boxes, lol
I do have too many. It takes me about a month to build one model. I have been buying kits for over 25 years. All of the kits behind me need built.
@@ScaleModelExperiment can only think of this, WOW!
I'm struggling down here in Mexico to get some, lol
Sorry but for me modelling is about enjoyment and there is no enjoyment in using photo etch . Therefore unless the parts are large and easy to fit (Covers for radiators , air coolers ) l substitute plastic parts where possible . l model AFV .s and photo etch in 1/72 and 1/35 is a nightmare .
I have friends that build in 1/32 with PE, that’s a no-go for me. I sometimes struggle with 1/24. The realism is part of the appeal I guess. Thanks for watching and participating in the discussion.
You couldn't use a large piece to demonstrate technique...? You had to use the absolute smallest one!? Thanks for the process though.
You have a point there Dean. Most PE pieces are small for increased detail. Thanks for watching👍