In today's video I will be replacing both lower control arms on this late model Toyota mini-van as the old control arm bushings have separated. I will be showing the driver's side for the most part of this video and near the end I show a little bit on the passenger side. Both sides are relatively similar in procedure for replacement. This Sienna is the front wheel drive version in this video. Replacement should be similar for the all wheel drive version as well. The labour/book time to do this job is approximately 9.1 hours for front wheel drive and 9.9 hours for all wheel drive. Typically, this job can be done in half or just under half of that time (typically 3 to 4 hours at most if everything goes well). Parts used in this video: --------------------------------------- Moog #RK622035 - Right side control arm Moog #RK622036 - Left side control arm Anchor #9236 - Left side transmission mount Anchor #9238 - Right side engine mount Products used in this video: -------------------------------------------- JET 140106 - 12-1/2 Ton Hydraulic Bottle Jack amzn.to/3WaNCiF Previous Videos: Unboxing Parts For 2015 Toyota Sienna - Control Arms & Engine Mounts th-cam.com/video/BCqYgkG5aoo/w-d-xo.html How To Press In Wheel Bearings On Toyota Vehicles th-cam.com/video/Ox3WI51JtNM/w-d-xo.html September 2023 - Car Shopping - Oldsmobile Cutlass Ciera 3.3 V6 (3300 Series) th-cam.com/video/8yMeSreuAxk/w-d-xo.html I Was Dismissed From The Shop... th-cam.com/video/zpCUoI-qsJE/w-d-xo.html If you would like to support my channel and help me post more content. Please donate here: www.paypal.me/MooseMobile OR Please consider leaving a donation through TH-cam's 'Super Thanks' if you think this video helped you and/or if you enjoyed this video. If you like my content please SUBSCRIBE/LIKE/SHARE/COMMENT. Please click on the bell notification if you want to be notified when I put out a new video. ------------------ Disclaimer: Due to factors beyond the control of Moose Mobile Auto Repair, it will NOT be held liable for anything such as damages to your vehicle(s) or somebody else's vehicle, injuries and/or death incurred as a result of improper use of tools, equipment, improper procedures, negligence, etc. Moose Mobile Auto Repair assumes no liability whatsoever and is NOT responsible for any problems/issues that may arise as a result of your own work on any automotive vehicles/machinery. These videos are solely for information purposes in which should be used as a guide and for reference only. The information herein provided are to be used AT YOUR OWN RISK and Moose Mobile Auto Repair is NOT responsible/accountable as a result of misuse of any information provided in these videos.
Impossible to get at that one control arm bolt without removing the sway bar links. I’d suggest buying sway bar links as well since they’re bound to break
It would be interesting to know how many hours and how much the jobs cost, I say this because no channel does it and the workshops charge whatever they want, so we could have an idea.
In today's video I will be replacing both lower control arms on this late model Toyota mini-van as the old control arm bushings have separated. I will be showing the driver's side for the most part of this video and near the end I show a little bit on the passenger side. Both sides are relatively similar in procedure for replacement. This Sienna is the front wheel drive version in this video. Replacement should be similar for the all wheel drive version as well.
The labour/book time to do this job is approximately 9.1 hours for front wheel drive and 9.9 hours for all wheel drive. Typically, this job can be done in half or just under half of that time (typically 3 to 4 hours at most if everything goes well).
Parts used in this video:
---------------------------------------
Moog #RK622035 - Right side control arm
Moog #RK622036 - Left side control arm
Anchor #9236 - Left side transmission mount
Anchor #9238 - Right side engine mount
Products used in this video:
--------------------------------------------
JET 140106 - 12-1/2 Ton Hydraulic Bottle Jack
amzn.to/3WaNCiF
Previous Videos:
Unboxing Parts For 2015 Toyota Sienna - Control Arms & Engine Mounts
th-cam.com/video/BCqYgkG5aoo/w-d-xo.html
How To Press In Wheel Bearings On Toyota Vehicles
th-cam.com/video/Ox3WI51JtNM/w-d-xo.html
September 2023 - Car Shopping - Oldsmobile Cutlass Ciera 3.3 V6 (3300 Series)
th-cam.com/video/8yMeSreuAxk/w-d-xo.html
I Was Dismissed From The Shop...
th-cam.com/video/zpCUoI-qsJE/w-d-xo.html
If you would like to support my channel and help me post more content. Please donate here:
www.paypal.me/MooseMobile
OR
Please consider leaving a donation through TH-cam's 'Super Thanks' if you think this video helped you and/or if you enjoyed this video.
If you like my content please SUBSCRIBE/LIKE/SHARE/COMMENT.
Please click on the bell notification if you want to be notified when I put out a new video.
------------------
Disclaimer:
Due to factors beyond the control of Moose Mobile Auto Repair, it will NOT be held liable for anything such as damages to your vehicle(s) or somebody else's vehicle, injuries and/or death incurred as a result of improper use of tools, equipment, improper procedures, negligence, etc.
Moose Mobile Auto Repair assumes no liability whatsoever and is NOT responsible for any problems/issues that may arise as a result of your own work on any automotive vehicles/machinery. These videos are solely for information purposes in which should be used as a guide and for reference only. The information herein provided are to be used AT YOUR OWN RISK and Moose Mobile Auto Repair is NOT responsible/accountable as a result of misuse of any information provided in these videos.
Appreciate the video great job on explaining how to. ❤
Nice work! Im gonna tackle it down on my moms van thanks for sharing 👍🏻
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Impossible to get at that one control arm bolt without removing the sway bar links. I’d suggest buying sway bar links as well since they’re bound to break
You can if you want. I managed to do the job on both sides without removing the links. Whatever is easier for you to do.
It would be interesting to know how many hours and how much the jobs cost, I say this because no channel does it and the workshops charge whatever they want, so we could have an idea.
It's in the description. I will post in the comments section as well, thanks.