Why is everyone Copying Lian Li Case's / New Kolink Unity Case

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ม.ค. 2025

ความคิดเห็น •

  • @jibberism9910
    @jibberism9910 4 หลายเดือนก่อน +1

    I love the casing, but how in the world are we ever supposed to acces ANYTHING?
    Everything is tucked away in those bottom casings, and absolutely nothing can be reached from any side, nor can any of the cabling be used, as it is tucked in and bound together tightly.
    How does one go about this issue?

    • @WELSHYTECH
      @WELSHYTECH  4 หลายเดือนก่อน

      I completely understand I have made a build video in this case So I know the frustration Look through the manual it does help

    • @jibberism9910
      @jibberism9910 4 หลายเดือนก่อน

      @@WELSHYTECH I don't believe I got one with my build. But I'll have a look for it. I'll watch the build vid.

    • @WELSHYTECH
      @WELSHYTECH  4 หลายเดือนก่อน

      you can download the Manual right here
      kolink.eu/Home/case-1/midi-tower-2/unity-series/unity-arena.html

    • @jibberism9910
      @jibberism9910 4 หลายเดือนก่อน

      @@WELSHYTECH hi, thanks - already found my goodiebag.
      There's not really much I can do. So I got a sata 2 usb cable with powersupply to at least get to my files.

  • @swis4
    @swis4 10 หลายเดือนก่อน +1

    just realised on mine the hole for the hdd at the back of the case is like 1/2 to 1/3 of the size of yours, is there a way to lift this opening up?

    • @WELSHYTECH
      @WELSHYTECH  10 หลายเดือนก่อน

      It's because the bracket takes both SSDs and HHDs

  • @swis4
    @swis4 10 หลายเดือนก่อน +1

    I just got this case and can’t seem to fit my HDD into the compartment for it at the bottom next to the psu, it won’t slide in from the back so i have to take the plastic cover off first and put it in from inside the case but then the screws are to the side so the ports aren’t accessible from the cutout on the back? any ideas, would i need to buy a thirdparty bracket?

    • @WELSHYTECH
      @WELSHYTECH  10 หลายเดือนก่อน

      The HHD bracket can be taken off

    • @swis4
      @swis4 10 หลายเดือนก่อน

      @@WELSHYTECH i’ll be honest this is the first pc i’ve built, are you referring to the black plastic “box” thing that’s next to the psu covering, or is the bracket a thing on the actual hdd

    • @swis4
      @swis4 10 หลายเดือนก่อน

      because there’s nothing on my hdd, it’s straight out of the box as just the standard hdd

    • @WELSHYTECH
      @WELSHYTECH  10 หลายเดือนก่อน

      @@swis4 yes bud there are tabs at both ends you have to press on both to slide the HHD Bracket out

    • @swis4
      @swis4 10 หลายเดือนก่อน

      @@WELSHYTECH is that on the hdd itself or the plastic box

  • @nicobuniotto6304
    @nicobuniotto6304 4 หลายเดือนก่อน +1

    Is possible to install a 420mm radiator on top? For example Corsair h170i. Thank you😊

    • @WELSHYTECH
      @WELSHYTECH  4 หลายเดือนก่อน

      @nicobuniotto6304 afraid it supports 140 mm fans but not radiators

  • @DSJOO7.
    @DSJOO7. 4 หลายเดือนก่อน

    Morning, I'm looking at the Kolink Unity Peak ARGB Midi Tower Showcase - Black case The HD Audio extension cable femaile/male & USB 9pin Extension Cable USB Header Male To Female & Front Panel Sleeved Power Reset HDD LED Speaker Extension Cable 30cm (Yellow)
    Are pre attached can they been changed as Il be waiting to put my own yellow ones in and IV see the space is very small would there be space to remove or are they fixed or does the top off the case be removed? If so, how is it removed? I've seen there's a screw but there seems to be another rivet. Or is it an allen key hole next to it? Thank you for any help.

    • @WELSHYTECH
      @WELSHYTECH  4 หลายเดือนก่อน

      Great question! The pre-attached cables are typically designed to be removable, but it can be a bit tricky depending on the specific case design. You'll likely need to unscrew the top and check for any clips or rivets holding it in place. Make sure to take your time to avoid damaging anything!

  • @fetus2280
    @fetus2280 11 หลายเดือนก่อน +1

    Ive got a clone, if you will, of the 011 Dynamic but mines a Dual chamber, can house 2 systems. I have the Metalic Gear Neo cube in White. Really nice case and was half cost of the 011 and much better in some ways. Much larger than this case. Lots of companies have been copying Lian's case for a bit now. Heck, mines like 5 years old or so now? I like this competition, helps bring costs down for us plebs :)

    • @WELSHYTECH
      @WELSHYTECH  11 หลายเดือนก่อน

      Yeah it's good to have competition

  • @kristersporietis8520
    @kristersporietis8520 9 หลายเดือนก่อน +2

    Could have atleast shown the rgb fans

    • @WELSHYTECH
      @WELSHYTECH  9 หลายเดือนก่อน

      I do show the fans I just don't turn them on go on my channel I did a build in this case

  • @Top3Entertainment
    @Top3Entertainment 11 หลายเดือนก่อน +1

    It's a banger case. Even lian li remade it with led bars on it

    • @WELSHYTECH
      @WELSHYTECH  11 หลายเดือนก่อน +1

      And it's under £100

  • @jimvrs5244
    @jimvrs5244 8 หลายเดือนก่อน +1

    hello, nice review
    Which case is better in the air flow
    kolink unity arena or kolink unity peak?
    I am between these two
    for my new setup..
    I would like your help!

    • @WELSHYTECH
      @WELSHYTECH  8 หลายเดือนก่อน +1

      in terms of Airflow Kolink Unity Arena Would have better airflow

  • @michajanicki6860
    @michajanicki6860 7 หลายเดือนก่อน

    fix your teeth :(

    • @WELSHYTECH
      @WELSHYTECH  7 หลายเดือนก่อน

      Judgemental much

    • @michajanicki6860
      @michajanicki6860 7 หลายเดือนก่อน

      @@WELSHYTECH what? XD
      truth always hurts... really, fix your teeth
      eot

    • @WELSHYTECH
      @WELSHYTECH  7 หลายเดือนก่อน

      @michajanicki6860 well keep your opinions on me to your self and stop judging people