How to Replace Intake Manifold 2003-2008 Toyota Corolla
ฝัง
- เผยแพร่เมื่อ 6 เม.ย. 2023
- Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ia/1AEIM00082
This video shows you how to install an intake manifold on your 2003-2008 Toyota Corolla. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Deep Socket
• 12mm Socket 1aau.to/objN/1AXAA00015
• E6 Inverted Torx Socket
• Ratchet 1aau.to/obtF/1AXAA00016
• Socket Extensions 1aau.to/objN/1AXAA00015
• Torque Wrench 1aau.to/oaxB/1AXAA00044
• Gloves 1aau.to/oRS/1AXSS00048
• Safety Glasses 1aau.to/oKd/1AXAA00343
• Razor Blade / Gasket Scraper 1aau.to/ois/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You do a great job of explaining everything. Including the little details, without dragging on perfect
+@RobE7075 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Great video. Why was this intake manifold in need of replacement?
The throttle body mount looks like for the 2005-2008 Corollas with drive by wire throttle bodies. The 2003-2004 is cable type. The mounting on the 03-04’s are different. So this intake manifold can be used for the 03-04’s.
super well done video. Best I have seen. Will follow exactly.
Another amazing money saving video! Thank you so much!!!
I appreciate you I love the way that you do it and how you describe everything
Thanks for the detailed video information, nicely explained. Thanks Buddy
Good job and awesome videos. Thank you.
Always good to smoke test the engine to make sure if you need to replace any of the manifold, valve cover or throttle body gaskets!
O-ring on oil filler cap needs replacing also?
Great video. Used it today thanks a lot.
Whay would be some signs of a bad intake manifold? And would you have rather just clean the inside and replace new cascades?
Black dust near the front bottom of the manifold, random vibrating with fluctuating idle
VERY GOOD VIDEO AND VERY EXPLANATORY.GREETINGS.
Please what’s the name of the second hose you took off, close to the intake manifold?
Hi, is this much different for a Pontiac G6? I don't know what I'm looking at. Can you do a video on it?
On a 2006 Corolla where is the idle air control valve it’s not on the throttle body where else could it be
That’s is the same for Toyota Corolla 2009 ?????
Don't you need to include a gasket?
Job estimate max 2 hours