How to Install a Shed Window (Step-by-Step DIY Guide)
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- Grab my FREE shed framing Plans! ⬇️
atimprovements.com/modern-she...
This video will show you how to install a shed window. Specifically, this video will show you how to frame a shed window opening, how to prepare the window opening for the shed window installation, and how to install the shed window. Additionally, this video will show you how to install shed window trim, how to install shed window flashing, and how to caulk a shed window.
I highly recommend that you use PVC trim for your shed windows - since it is more resistant to rot.
There are many different ways to install a shed window, but this method worked for my Modern Shed.
For more shed window installation instructions, check out my Blog Article:
atimprovements.com/shed-windo...
I am creating a complete "Modern Shed Build TH-cam Series". Below are the other videos in the series:
Introduction to the Modern Shed Series: • I Transformed my Shed ...
Shed Foundation Options: • Shed Foundation Option...
How to Build and Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame Shed Walls: • How to Frame Shed Wall...
How to Frame a Shed Roof: • DIY Shed Roof Framing ...
How to Install Shed Siding: • How to Install Shed Si...
How to Install Shed Sheathing: • Shed Sheathing Install...
How to install Shed Trim: • How to Install Shed Tr...
Inexpensive Shed Window Option (Acrylic): • Inexpensive Shed Windo...
How to Build a Shed Ramp: Coming Soon
Be sure to subscribe and hit the notification bell so you don't miss any videos in the Modern Shed Build Series!
If you want to learn how to build the EXACT shed show in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me! Every purchase helps support the channel!
Follow me on Instagram: ATimrprovements
Check out my Blog: Atimprovements.com
🛠🧰 Below are the Tools I used in this video (some links may be affiliate)
14" x 21" Shed Window: amzn.to/3peXfwH
Flashing Tape: amzn.to/3PjN1Wr
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Miter Saw: amzn.to/3Q71gik
Circular Saw: amzn.to/3BFotC4
Level: amzn.to/3HowUDn
Chalk Line: amzn.to/3MwSDg8
Jig saw: amzn.to/3I6lcyd
Bar Clamps: amzn.to/3JjFrJe
Paint Sprayer (for Siding): amzn.to/3bkuwn8
Caulk: amzn.to/3SugNe1
Thanks for Watching!
![แฉ [2/4] 11 ก.ค. 67 ‘ขวัญ อุษามณี’ เผยความจริง 16 ปีที่แล้วเกิดอะไรขึ้น? | GMM25](http://i.ytimg.com/vi/K4pXnUiObbk/mqdefault.jpg)
![[TH] Esports World Cup : Knockout Stage Day 1](http://i.ytimg.com/vi/ES-vr-FarFg/mqdefault.jpg)
I wanted to install a window in an existing shed so I viewed several videos and this one is the one I found most helpful. It took me two afternoons to complete my first window install including the final caulking and paint touch up. I'm 72 years old with some construction experience (45 to 50 years ago). I finished yesterday and it looks great. Thanks!
I'm constructing my first DIY shed and this was a fantastic video for someone who has never installed a window before.
Glad it helped!
Haha i used to do siding and windows for a living. I did it for 12 years, but never, have i installed LP smartside panels like this. Im building a shed right now, and have my 2'0x2'0 window framed in but then realized i have no idea how to put the window in since im using the smartside panels as my sheathing... that is until i watched this video! We get alot of snow and ice in the winter so i may use a drip edge since i wont have more than 12" of overhang.. anyways, thanks for the video! Judging by the comments, you have helped ALOT of people out by documenting your progress here.
FABULOUS TUTORIAL!!!! I am now ready to install the windows in my shed. THANK YOU!
Great video my friend. I have been looking for a good tutorial on how to install a window. I am DIY guy and have done many projects except for a window install. Your video is awesome and has everything I needed to have the confidence to go do it on my own. Thanks for the video and great job teaching and executing.
Just did my shed window. Thank you. Came out great.
I’ve been looking for a video exactly like this. Thanks!
Keep them coming: I enjoy all of them
Keep ‘em coming! Loving this series
I appreciate it!! Thanks for your help on the other window!
Best and most detailed video on an installation I have ever seen. I'm a visual person and you showed all vital steps. I can 100% do this following this presentation!! Also, the recommendation on a window to put it is perfect. I found the exact window, same price on Amazon already! Well done!! New subscriber just based on this and look forward to seeing all your other video's.
I really appreciate it and I’m glad it was helpful! Welcome to the channel and thanks for the support!
Thank you that was really detailed and clear ❤️🤗💯
I almost spilled my drink when you started nailing the trim with a framing nailer.
Haha yea not ideal. Go with Brad
Thanks for the instructions!
Good job on the window just what I needed.
It’s great that you stated not to caulk or seal the bottom of the window so water can escape in case it manages to get in. But a few steps earlier you used that black sealant when attaching the window on the bottom as well. Doesn’t that defeat the intended purpose? Also I do believe the side trims need to extend all the way down and the bottom trim fits in between them. Great clear video overall.
The answer to both of those questions is yes. Then he caulks across the bottom of the window's exterior, once again preventing any water that may enter from the top or sides from escaping. Do as he says and not as he does I guess 🤷♂️.
Drew you make this look so simple. I appreciate the use of tape to prevent spill over. Great job. About how much does the material cost? Is their a material list for review?
super helpful thankyou man
Glad it helped!
Dude, your transitions are on point! Trying learn about proper window installation methods and am learning videography!
Haha appreciate it!
Following now 😊come help me make my shed better lol
This will be my next shed !
What was the final cost of this shed ?
At 8:30 you were laying down a sweet and steady bead. Good job.
Haha #steadybead. Thanks for watching!!
nice job!
Thanks!
Nice. I need a little window in my shed, but it's too small of a job for anyone to want to do it. I built the shed, so I guess I can install a window too.
Nice video. The pacing was very good for folks to learn. Just one question - I thought sealing a window required Z flashing at the top?
Question: When rainwater runs down the depressed GROOVES in the siding from above the window, isn't that water getting trapped in that groove between the siding, the window frame and the trim? I don't see where it can drain out. The same concern with Z-flashing if you put horizontal trim over the Z-flashing to hide it. The water running down the grooves is trapped between the horizontal separation bend in the flashing and the trim applied over it. It has no place to drain out. What am I missing here? Should I fill those grooves with caulk??
Thanks for showing the actual size of the window because pictures don't all the time. I was looking for a 4f wide to 2f9 in height window at first but seen the 14x21 will work if it won't fit upright because of lack of space were its gonna go then it'll go on to its side.
But on the cat shed was built out of all recycled lumber some of the lumber was bent twisted one main spot i need to rebuild on it is the door frame because the twisted lumber i have new stacks of recycled lumber so I'll find a straight piece for it and rebuild it sometime untreated lumber cost to much for a place to just throw it outside i have hundreds worth of lumber.
But some place when they build they're create boxes to carry copper in them with thin birch and pine boards they use way to many nails so i can't take those apart to save the nice pine boards good 10 or 11 foot boxes but way to many nails are punched in holding it all together whoever builds those shipping boxes goes crazy with the nail gun i hoard alot of lumber knotty pine boards to lots of grade 2 and 3 lumber
I'll be starting a similar shed this weekend. Need to breakdown and buy a framing nailer (have finish nailer). Did you use 30 degrees on rough framing and 21 degrees on siding?
Thanks. Better that anything I've build. Maybe: 1) don't run caulk on the bottom, 2) bit of caulk at the of each smartside groove meets the tape, 3) dont cut the bottom sill tape all the way to the corner. Bend/stretch about 1/4" ark nd the corner.
Maybe this answers my question about letting rainwater run down the grooves -- trapped by a sealed-off groove down lower -- and then have no way to drain out. Fill the grove with caulk at the top where the tape (or trim) is attached so that water can't get into that part of the groove to begin with.
Hey what's up my man I'm installing some windows on these LP smart side panels but something came to mind.. did water ever get in through the small "ridges' in the panels? As you can see in your video there is two going thru the top of your window... I was just thinking theoretically water would collect in there if it was there is a gap correct? Im not sure if you did that in your video, even though the tape will help it not leak into the shed, do you think it will eventually cause the wood to rot against the tape? Shouldn't it have some sealant up to the top of where the trim will be to avoid trim rot as well? Thanks man
Awesome tutorial. Saved me a bunch of money, time, and most of all embarrassment in front my wife, lol
Haha I hear you on that! Glad it was helpful and thanks for watching!
Hey the sharpie part… you can just mark it on one side for both lines. The mid point would give you a perfect mid
Could these be used on an older mobile home? It has those aluminum windows on the inside and out of the windows, meaning you have to open two windows to get air. I want to take them out and get something new.
I only go buy lumber if im really needing a piece i don't have if i don't have much 2x3x8s then I'll buy some 2x4x8s instead but i have stacks of yellow pine
Companies don't hardly use white pine but that wood looks nice for trimming around any frame
A couple have asked about the grooves/design of the siding. Won’t water drip down those and get behind the tape? I have a shed with the same siding and want to retrofit a window. I’m curious about the grooves too.
Same. I am putting siding on after for that reason
I think caulking on the bottom of the window is a good thing but others say not to caulk the bottom cuz it will trap water. what do you think ?
We bought our house last year and there was already a shed built on site. We want to add a window to it, that has opening capabilities. The shed has flat drywall inside, so the walls are already thick and we only have a basic idea of where the support beams/studs are. Any suggestions? :-)
Hi. Nice shed! What material are you using to line the interior walls? Thx!
Hi Jeff - it's a product called PROSLAT
On the cats shed i built i didn't use no rubber flashing around the edges of the windows frame i just bought 2 old used windows and built the frame and put them on then screwed wood trim on neither leak any water in when it rains
But for that going on the house in the attic I'll use the the rubber flashing and figure out how im gonna cut the vinyl siding and this is why i don't like vinyl siding on houses good thing is its not old siding
Whatever way its gonna get cut i have to have a window in up there to get all the old installation out
Could you install the window UNDER the Smart Siding? Thanks.
From LP Website:
Always install your windows and flashing to the studs before you hang your LP SmartSide panel siding. Carefully cut the window opening in the panel with a 3/16-inch gap along the sides and the bottom of the window, and a 3/8-inch gap along the top.
How do you cover the nails on the siding panels??
How do you measure initially to see where the Jack and king stud go?
How do I remove the bottom half of my shed window to put in air conditioner. Our window is identical to the one in the video just a little larger
What if water goes down the grooves in the panel? Will it get behind the tape?
I said the same thing
I was wanting to ask the same, he hasn’t answered yet, huh?
As long as you caulk the trim to the panel and then check your caulking above the top piece of trim each year or so, it will be fine. I notice after a few years in the sun and then extreme cold, caulking will Crack and sometimes peel
now your huskavara chainsaw and dewalt drills have a nicer house than me
Well the contractors I hired didn't do any of this and now my would be studio leaks.
Sorry to hear that....At least you know how to fix it now
Any reason for no flashing tape on the top side of the window?
Ikr?
6:49 you said to make sure the tape doesn't go any further down. But it looks like you did. So whats the truth?
You're looking at the wrong lip. That's why he zoomed way in like that. You can also see that he lines the trim up exactly with the end of his tape, which is lined up with the tiny lip that he's talking about. It's kind of hard to see.
What is a PC window on a shed
I can't do anything straight so get a big mess!
Haha you should have seen the first window I did. Thanks for watching!
Sealant? How come you didn’t use the other word? 😂
What’s the name of the window? It’s perfect for my shed, with the size and the pre installed mosquito netting
What and who are you talking to