This tutorial is what inspired me to get serious about Blender. This was the spark needed to realize that I CAN make all those wallpapers on photos I see on the internet. Thank you.
The hardest part of this tutorial was figuring out why by lighting looked so different from his before he showed us how to set up the environment and adjust the Eevee settings. I didn't know that LookDev took on the effects of whatever settings you used for Eevee. He's teaching me things that he didn't even mean to teach!
@@rexk4208 Thanks for the tip. He explained to activate these at another tutorial and I forget it!! just 1/2 hour finding why i cannot make it shine!!!! Thanks again!
i was totally shocked when i made this and actually wanted to cry because i was really struggling with blender, thank you so much for such an easy and mind blowing tutorial, thank you so much man ❤
Hey ducky, one thing: when you make looping keyframes with rotation, make sure you go to frame 1 and put 0 degrees, and then go to the end of the timeline +1, because if it's looping, frame 1 and 121 are the same, and put the 360 degree keyframe there. if you put it on 120, you'll have 1 frame that's duplicated, and sometimes that can be noticeable.
When you start to setup your camera animation, make sure to set the Interpolation Mode to linear, if it's not already by default. Otherwise, you could get some acceleration and deceleration in your camera movements.
After hours of watching you. Starting the cg boost course and becoming a tier 2 Patron. I can actually follow along. Thank you for all your content. I'm getting better.
You should try a tool to display the keys you are pressing on the screen so its a little easier to remember all the shortcuts you use. I just got into blender and your videos are helping a lot =)
holy shit... loving this!!! I'm honestly scared of blender but you made it seem so effortless (in a way) and yet fun to play around with. Awesome stuff!
DANG! I thought it'd be the first time I watched one of your tutorials where I can learn but nothing is "new" to me and then you played with that contrast and gamma and blew me away again!
YOU DESERVE THE NOBLE PRIZE👍 for real all of your videos are short straight forward and simple for beginners. You are creative really thank you for sharing this with all of us. Keep going we will support you👏
Hello, I follow all your tutorials and I think they are great, please do not deactivate the display of keys in the tutorials, I do not speak English well and when I do not understand something of what you say, it is very useful to see the keys you press.
Agreed, this would be very helpful as you use a lot of key shortcuts and don't always reference what they are (especially when changing views like with ~ (Tilde)
Yes! Finally you use M instead of Ctrl + G to create new collections. I always think this way is better because it will automatically put my objects into new collection so it won't mess up with my original collection. Anyway, thanks for the great tutorial and keep it up~
Really awesome tutorial. My first one I’ve followed properly and actually got to look how I wanted it to! I’ve been agonising about ponying up for C4d but I think blender can do it too.
Take some lights aways my comp had the same Edit: otherwise it might be to much to render. love your work btw ducky3d have done a lot of ur animations already
@Ducky 3d Thank you for the great channel and tutorials, but I want to know how I can best learn Blender in and out, not just what I can do via tutorials, any suggestions?
This is by far some of the coolest stuff. I did the exact same thing as in the tutorial, but the speed of it seems to be waaaaaay faster then the tutorial and I dont get the nice metallic texture when I play it. Good tutorial though 🙂 love it
For anyone is using an emission in the ''Shading'' tab, (which you are) You may want to enable ''Bloom'' for the emission to work (in Render properties) I think I managed to reset the properties by pressing ''Backspace'' or idk. Because my emission was working fine the other day. But I guess ''Bloom'' needs to be enabled as well. So, keep it enabled for emission. (Or i might be wrong, but, thats what happened to me) (PS, I pressed backspace while I was in Shading tab)
I was able to keep up till 2:00 minutes in without having to pause..one day i hope to nail a tutorial start to finish no breaks...and I should post my projects and tag you after soon...these are so good...
At frame 2:13 you say you hit Cntrl-+ to select all extruded faces...but when i hit it..it does nothing.... but increase the viewport size from the sound of it I can hear you tapping the keyboard 2 more times.aftr.Cntr + What commands are you using specifically to select all extruded faces???
hit the "+" button in the numberpad; this happened to me too, i was hitting the "+/=" button above the letters on the keyboard and the viewport zoomed in on me. CTRL and the numberpad + is what selects these sections.
Im on a MB pro touch (i7, radeon and 16GB RAM ) and this is the first time Im seeing my laptop struggling! Time for a build with a nice graphics card and CPU
Excellent tutorial man Just keep posting tutorials like this and you will put Maya out of business * to keep the camera from slowing down at the end, move the last keyframes a couple frames back
It's cleaner to go into the graph editor, selecting the camera, select the keyframe at frame 0, pressing "T", then selecting "Linear" under "Interpolation".
I am Brazilian I use browser translators. Your works are very good, but the way of explaining can improve, for example: double-tap on insert, where is that on the keyboard ?
When you create these shapes, do these just pop in and then you know right away how to achieve that look that you've imagined, or do you need to experiment?
Man, using a voronoi node to drive the brick texture creates a result I have been dying to figure out for ages now, thank you so much.... That sweet "paneled" look is so sick. Is there a node setup that would allow to use the emission shader in just the mortar/crack areas of the texture? And perhaps change the width of that area as well?
SO I did this tutorial, amazing job btw! and I added some logo animation in the middle basically using the towers as background. But when I render the animation its just a checkered wallpaper. Not sure if its take extremely long, even when using Eevee. But just wondering why it "won't" export. Been trying to find solutions for days.
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
This tutorial is what inspired me to get serious about Blender. This was the spark needed to realize that I CAN make all those wallpapers on photos I see on the internet.
Thank you.
The hardest part of this tutorial was figuring out why by lighting looked so different from his before he showed us how to set up the environment and adjust the Eevee settings. I didn't know that LookDev took on the effects of whatever settings you used for Eevee. He's teaching me things that he didn't even mean to teach!
Yeah, just spent 15 minutes on it. :-)
Eevee > Ambient Occlusion + Bloom + Screen Space Reflections...
@@rexk4208 Thanks for the tip. He explained to activate these at another tutorial and I forget it!! just 1/2 hour finding why i cannot make it shine!!!! Thanks again!
The hardest part for me is rendering with my ancient fuckin garbage ass laptopp...blender crashes everytime i press render
@@rexk4208 it still looks the same, what am i doing wrong?
@@jxsh9853 did you make it work? i have the same problem
i was totally shocked when i made this and actually wanted to cry because i was really struggling with blender, thank you so much for such an easy and mind blowing tutorial, thank you so much man ❤
Hey ducky, one thing: when you make looping keyframes with rotation, make sure you go to frame 1 and put 0 degrees, and then go to the end of the timeline +1, because if it's looping, frame 1 and 121 are the same, and put the 360 degree keyframe there. if you put it on 120, you'll have 1 frame that's duplicated, and sometimes that can be noticeable.
1:50 Alt + E > extrude along normals
When you start to setup your camera animation, make sure to set the Interpolation Mode to linear, if it's not already by default.
Otherwise, you could get some acceleration and deceleration in your camera movements.
this needs more likes. didn't realize this until after a 2hr render lol
how do you do this? ^^
broooo you are god!!!!
Thanks. Been looking for over an hour through 10 pages of google/videos and almost blew my brains out.
This might just be the best looping animation you have made!
Thank you so much!
After hours of watching you. Starting the cg boost course and becoming a tier 2 Patron. I can actually follow along.
Thank you for all your content. I'm getting better.
Thanks dude
@@TheDucky3D one doubt
i have never ever ever ever seen better tutorial than this !
Ducky's tutorials are like apples, one a day keep you fit
You should try a tool to display the keys you are pressing on the screen so its a little easier to remember all the shortcuts you use. I just got into blender and your videos are helping a lot =)
Can you turn on function where it shows which keys are you pressing on the screen. Thanks and i love this animation.
Now it's a perfect quarantine for me... Thanks Ducky.
You made me start blender!
Same!
@@antonykassis same
I've been learning blender with these sci-fi animations, thanks for the great tutorials!
Can we finally call Nathan Duck... The...
King Of Procedural Textures😘
Thank you! Just rendered my first blender project with this tutorial. I really appreciate it.
Your tutorials are always so fun and to the point thank you !!
holy shit... loving this!!! I'm honestly scared of blender but you made it seem so effortless (in a way) and yet fun to play around with. Awesome stuff!
DANG! I thought it'd be the first time I watched one of your tutorials where I can learn but nothing is "new" to me and then you played with that contrast and gamma and blew me away again!
You’re a wizard, Ducky
"couple days ago i posted"
posted 15 hours ago
time am i a joke to you ?
ahmed muhammed lol tile is weird to me
Don't worry about, he is so productive that he can live 4 days in 1 day of our normal day
@@TheDucky3D cntrl + doesnt do anything for me at 2:18
@@platinumpineapple9943 use the + on your numpad
fab stuff inspirational experimentation
YOU DESERVE THE NOBLE PRIZE👍 for real all of your videos are short straight forward and simple for beginners. You are creative really thank you for sharing this with all of us. Keep going we will support you👏
Hello, I follow all your tutorials and I think they are great, please do not deactivate the display of keys in the tutorials, I do not speak English well and when I do not understand something of what you say, it is very useful to see the keys you press.
Agreed, this would be very helpful as you use a lot of key shortcuts and don't always reference what they are (especially when changing views like with ~ (Tilde)
Why don't you use alt e for individual extrusions, and s for scale ?
Jai Bellare I wasn’t aware of that shortcut, thank you
Ducky 3D lol
No problem, Thanks
the 's' for scale? that's insane lol
blender edit mode shortcuts are a learning curve
Yes! Finally you use M instead of Ctrl + G to create new collections.
I always think this way is better because it will automatically put my objects into new collection so it won't mess up with my original collection.
Anyway, thanks for the great tutorial and keep it up~
Loved this! guiding me to create this means more than I can say here. Thank you
Are you kidding me?? This is absolutely stunning work!!
I'm new to blender and your videos are so easy to follow along with while also giving awesome results. Awesome work man!
Amazing tutorial, I enjoyed it immensely, thank you very much.
super cool tutorials , keep it up :3
And again I find inspiration and knowledge from your channel. Thanks and please don't stop. You are really creative!
Really awesome tutorial. My first one I’ve followed properly and actually got to look how I wanted it to! I’ve been agonising about ponying up for C4d but I think blender can do it too.
My computer died while making this.
my computer got 3/4 of the way there then blender kept crashing lol
Take some lights aways my comp had the same
Edit: otherwise it might be to much to render.
love your work btw ducky3d have done a lot of ur animations already
Big dream but died computer LOL
SAME LOL
Lol mine exploded with the power of 9000
@Ducky 3d Thank you for the great channel and tutorials, but I want to know how I can best learn Blender in and out, not just what I can do via tutorials, any suggestions?
you make some really cool "Blends"!
Thank you so much! For taking the time to do this! I would have spent a long time trying to make those “borg cubes” procedurally! Great tutorial!
We are so glad to have you ! :)
AYYE I just saw this in instagram and was hoping you made a video on it
Love to watch your tutorials 😍
Thank you for these amazing tutorials♥️
This is by far some of the coolest stuff. I did the exact same thing as in the tutorial, but the speed of it seems to be waaaaaay faster then the tutorial and I dont get the nice metallic texture when I play it. Good tutorial though 🙂 love it
UV texture thing will be very helpful thanks
you can also get the bricks mapped evenly by rotating it by 45 degrees on the tangent direction that its stretched on.
Only great FX tuts
Always brilliant dude !
For anyone is using an emission in the ''Shading'' tab, (which you are) You may want to enable ''Bloom'' for the emission to work (in Render properties)
I think I managed to reset the properties by pressing ''Backspace'' or idk. Because my emission was working fine the other day.
But I guess ''Bloom'' needs to be enabled as well. So, keep it enabled for emission. (Or i might be wrong, but, thats what happened to me)
(PS, I pressed backspace while I was in Shading tab)
Thank you so much! I was wondering about this.
4:30, if someone has a good resource to understand what exactly happens when you plug a color output in a vector input, i'd be the happiest man.
I love your tutorials, they inspire me to pick up things again. thanks for that! im learning something new every day :D
«Как енто можьна сделять?»
Oh hey this tutorial looks goo- *computer explodes*
Thanks for the tutorial man..it's mind blowing 😍😍😍...now only I'm just finished my project with help of your tutorial 👩💻😍😍...
Hey one doubt
I was able to keep up till 2:00 minutes in without having to pause..one day i hope to nail a tutorial start to finish no breaks...and I should post my projects and tag you after soon...these are so good...
I was waiting for this. Thanks so much
Thank you for this amazing tutorial bro!
T.H.A.N.K Y.O.U !, in the end i bumped up the glow so high i almost went blind :D
found you recently, amazing vids dude!!!
wonderful Nathan, well done always so inspiring!
OMG BROTHER YOUR VIDEOS NEEDS BILLIONS OF VIEWS AMAZING VIDEOS BROTHER KEEP MAKING AMAZING TUTORIALS ❤💛💚💙💜
Thank you. I work on your works by reproduction. I think I learned the program.
Exquisite tutorial as always. Ill get something down soon
I'm having a blast making all these videos. 2020 is the year of Blender.
"Sci-fi greebleness" - that should be the title for a procedural add-on.
At frame 2:13 you say you hit Cntrl-+ to select all extruded faces...but when i hit it..it does nothing.... but increase the viewport size from the sound of it I can hear you tapping the keyboard 2 more times.aftr.Cntr +
What commands are you using specifically to select all extruded faces???
hit the "+" button in the numberpad; this happened to me too, i was hitting the "+/=" button above the letters on the keyboard and the viewport zoomed in on me. CTRL and the numberpad + is what selects these sections.
Your a life saver. Thank you so much dude
@@TheDeenasaur Thank you so much!
@@TheDeenasaur Thank you so much.
really cool result!
Very good creative stuff.
thanks blender guru
Im on a MB pro touch (i7, radeon and 16GB RAM ) and this is the first time Im seeing my laptop struggling! Time for a build with a nice graphics card and CPU
You. Are. The . Man.
Very nice, it would be awesome to add the final loop at the end of the video ❤️
absolutely perfect thank you for the videos they have helped me learn a lot in a very short amount of time, invaluable
Классный туториал, спасибо!
U da man! Nice job! You have a bright future!!
voronoi: sci fi epic hell yeah!
Thank you for the tutorial.
Well that's my plan sorted for tomorrow. Thanks for this.
Done a version. Going to have to refine it as my machine could not handle it properly.
Awesome!
awesome
need more environment for game
very cool Nat ,good job . hey are you on the blender facebock page ??
So cool! Thank you, learnt alot of new things
loved this tutorial. you have a new subscriber now. hope we will get to learn more from you.
Great video mate, looks amazing :)
Geometry node will make it easy instead of the plenty explanation
Excellent tutorial man
Just keep posting tutorials like this and you will put Maya out of business
* to keep the camera from slowing down at the end, move the last keyframes a couple frames back
It's cleaner to go into the graph editor, selecting the camera, select the keyframe at frame 0, pressing "T", then selecting "Linear" under "Interpolation".
Amazing, what are your pc specs bro? :)
Fantastic!! Thanks mate!
another wonderful video tutorials thanks a lot bro.....
I am Brazilian I use browser translators.
Your works are very good, but the way of explaining can improve, for example: double-tap on insert, where is that on the keyboard ?
Great video, really useful thanks.
ty bro very very much, helped me a lot. I learned nice new things
all of your tutorials are just so amazing. Learning a lot here even though I've worked with Blender for over 2 years now. Well done
It's kind of funny how all great animations start with a cube in the centre.
Thanks you for video!
Love you sir from india I learn so much from you
When you create these shapes, do these just pop in and then you know right away how to achieve that look that you've imagined, or do you need to experiment?
Wow amazing 😍❣️
Thanks for this one appreciate it.
Man, using a voronoi node to drive the brick texture creates a result I have been dying to figure out for ages now, thank you so much.... That sweet "paneled" look is so sick. Is there a node setup that would allow to use the emission shader in just the mortar/crack areas of the texture? And perhaps change the width of that area as well?
You need to get a filter on your microphone so that your keyboard isn't so loud
Nice Tut. Hard for my laptop to keep up, but managed to render in 2 hours. lol
SO I did this tutorial, amazing job btw! and I added some logo animation in the middle basically using the towers as background. But when I render the animation its just a checkered wallpaper. Not sure if its take extremely long, even when using Eevee. But just wondering why it "won't" export. Been trying to find solutions for days.