My memory card popped out and I could not raise the eye to get it. This helped me take it apart to pull out the card. I did not need to take off any cables thankfully. Thanks!
Nice disassembly mate. Pretty hard to find it on youtube as it's not mainstream. I was looking onto it because mine just completly died, to I'll try to troubleshoot somehow. Cheers
@@brian_serafin I couldn't fix it for now 'cause my problem is in the conector, not the cable. For that I have to send it to someone that makes precision sodering.... and I still couldn't find one. Mine also died suddenly, so with a bid of wiggleling on the ribbon it flashed. I changed the cable but the problem persisted. That is how I suppose where the problem is.
Hey Marc, I was hoping you could help me. I have the same camera. The red light is solid. I have tried to reset the de ice but that has not worked. When I stop pressing the set-up button, the device says it is trying to connect to the WiFi. Any advice on how to fix this? Thanks
Great video. The issue I am having is the camera doesn't detect the power cable on that little PCB. I disconnect the 2 harnesses and 1 ribbon cable then reseated everything but the camera still doesn't detect the power cable. I tried a different outlet and brand new cable as well. I'm going to disassemble further and see if something got unplugged further inside.
@@blaaaaaaah2 if you still wondered....I found on mine that its micro/mini usb power socket had disconnected/lifted from the board. Going to reflow. press it to check LED power continuity.
My memory card popped out and I could not raise the eye to get it. This helped me take it apart to pull out the card. I did not need to take off any cables thankfully. Thanks!
Thank you so much for helping me to take out the sd card which is popped out. Appreciate you.
Nice disassembly mate. Pretty hard to find it on youtube as it's not mainstream. I was looking onto it because mine just completly died, to I'll try to troubleshoot somehow.
Cheers
Thanks man, good luck!
Did you fix yours? Mine died to for no reason...
@@brian_serafin I couldn't fix it for now 'cause my problem is in the conector, not the cable. For that I have to send it to someone that makes precision sodering.... and I still couldn't find one.
Mine also died suddenly, so with a bid of wiggleling on the ribbon it flashed. I changed the cable but the problem persisted. That is how I suppose where the problem is.
Hey Marc, I was hoping you could help me. I have the same camera. The red light is solid. I have tried to reset the de ice but that has not worked. When I stop pressing the set-up button, the device says it is trying to connect to the WiFi. Any advice on how to fix this? Thanks
Thank you! My SD got stuck in.
Hi mate Eufycam 2C pro . Sync button not working charging not working. Any idea?
Thanks. This helped me to disconnect the IR lights. To my astonishment Eufy still does not allow you to simply disable them in the app.
Great video. The issue I am having is the camera doesn't detect the power cable on that little PCB. I disconnect the 2 harnesses and 1 ribbon cable then reseated everything but the camera still doesn't detect the power cable. I tried a different outlet and brand new cable as well. I'm going to disassemble further and see if something got unplugged further inside.
I hope it's as simple as a loose cable or something!
same problem. did you ever figure out a solution?
@@blaaaaaaah2 if you still wondered....I found on mine that its micro/mini usb power socket had disconnected/lifted from the board. Going to reflow. press it to check LED power continuity.
My cam, stop moving up and down, and i can hear something loose when i shake it. Wish part is responsible for the movement?
That screwdriver is cool ! Where did you get it from?
I think it was an amazon buy - though the gears stripped themselves so had a replacement sent to me so not sure how long they last.
@@ziksfix Ok cool,. thanks.🙂 Keep up the great work.👍
@@tennaj1367 thanks!
Hi. My camera is not connecting to my wifi. Do you happen to know why? Thx.
Same here, did you find a solution to this problem?
Same here ....any leads??