05 Nissan Pathfinder long crank (or shut off while driving)

How to fix most Nissan vehicles with long crank or shut off while driving.
Usually it's a crank sensor issue.
Want to make extra money, or change your life: thesunrisedriver.com/hustle
Don't forget to subscribe, like and share!
#multiplestreamsofincome #nissan #belegendary

[@TuckMe13]

Remember there are two crankshaft sensors. One is behind the engine, and this one you pointed out. I wasn’t sure of this one, so many thanks to you for pointing it out. Blessings!

[@samuelg.sarabia3483]

Thanks for talking the time to share that. Very helpful! God bless you!

[@vee2720]

This is what is going on with my car. Thanks so much for the video!

[@Callmeblessed572]

Thank you so much it seems this is the same problem that we are having! We are going to try and prayerfully it works. Blessings ❤️🙏🏾

[@dheerandomone]

Same problem with my Nissan Pathfinder 06, thank you for this video .

[@trevoratkins3865]

Thank u man. Your a great person

[@ernestoolvera7922]

It just happened to me thank you very much, god bless you

[@skwizzhead3056]

Nissan has a recall for the stalling problem. It calls for replacing the ECM relay. This fixed my Nissan Pathfinder problem of stalling / long crank, etc. Did set camshaft code, but seems sensor is getting power from ECM relay. It is located in the engine compartment fuse box. Better replacing this part first (less than $10) than buying the camshaft sensor.

[@bythebay2008]

Can you share a picture of the fuse box with the ECM relay marked? I replaced crank sensor last year, worked for 9 months, then this month, winter, it will not start.

[@a77medee]

which relay is it can you pin point it it would be great

[@dm7622]

Thank you for the video sir god bless

[@championboy794]

Thanks my brother

[@hagawi2404]

Thank you

[@MrEvodio65]

My 07 Pathfinder sometimes cranks too long,will try this.

[@scottmulligan8571]

Man...much thanks..saved me money!

[@FSTGxCerberus]

I changed my fuel pump a while back and it cranks fine but my car would still shut off in the middle of driving w the vdc and slip lighting up is that also the problem??

[@thesunrisedriver1683]

Yeah could be, I don't have that car anymore, but I think it have 2 of those sensors. Go the cheap route first by changing them to see it it stop. And also run a scan to see what code it's giving you. Hope that helps.

[@shaniquewright6856]

Hello wanted to know what was the problem. My car is giving this kind of issue

[@FSTGxCerberus]

@@shaniquewright6856 well for my problem I found and fixed it by replacing the cam sensor a and b and the relay coils and the sensor will cost you about 60-80$ a piece at o reilys and the relay coil if I remember cost like 200-300$ at my local nissan dealership

[@ngautodetailing839]

Amigo that just happened to me I will check that

[@dalbergmassanga4650]

My does start normally .... but it keep turn off should I change the sensor?

[@thesunrisedriver1683]

Yeah, sometimes that's how it gives you signs it's going bad

[@JNava915]

​@@thesunrisedriver1683Do you know if there are 2 crankshaft sensors?

[@woodulike2know391]

We replaced the camsensor and cranksensor position and still have problem. Are their 2 crank sensors

[@thesunrisedriver1683]

Yeah there are 2, and make sure the parts is not after market, hope that helps.

[@JNava915]

​@@thesunrisedriver1683 What's up, I know there are two camshafts sensors which are on top of the back on engine, but not 2 crankshaft the only crank sensor I know is the he pointed out in the video.

[@reginapatrick9268]

Is this the crankshaft sensor?

[@thesunrisedriver1683]

Yes