Nissan Pathfinder 2005/2008 Crank No Start How To Diagnose And Narow Down The Problem Found Engine ?

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ธ.ค. 2024

ความคิดเห็น • 39

  • @scannertz6505
    @scannertz6505 3 ปีที่แล้ว +2

    What was the fix? Bad engine computer or crankshaft sensor or bad sensor wiring?

    • @BestCarFixes
      @BestCarFixes  3 ปีที่แล้ว

      engine was not good

    • @pilotohernandez1569
      @pilotohernandez1569 3 ปีที่แล้ว +6

      @@BestCarFixes how the engine was not good what u mean?

    • @cutcali7907
      @cutcali7907 2 ปีที่แล้ว +1

      I love people who think they know this shit.

  • @tpridgen11
    @tpridgen11 2 ปีที่แล้ว +3

    Is there a follow up or a part 2 to this video....kinda left us hanging here ......

  • @dillonfeilen7330
    @dillonfeilen7330 2 ปีที่แล้ว +2

    What did issue end up being

  • @Illtronic-hq2vg
    @Illtronic-hq2vg 10 หลายเดือนก่อน +2

    Have the P0113 code also and it wont start.... Best guess: MAF

  • @pilotohernandez1569
    @pilotohernandez1569 3 ปีที่แล้ว +2

    I have a 08 Pathfinder it have injector pulse but not ignition signal to the coils I change crankshaft and both cam sensor and same and it have rpm signal the check engine light stay on when cranking not blink not code what can be? Thank u

    • @BestCarFixes
      @BestCarFixes  3 ปีที่แล้ว +1

      See if you have battery voltage at the coils while cranking. If the voltage is low, swap the Engine Control relay and the fog lamp relay and see again

    • @pilotohernandez1569
      @pilotohernandez1569 3 ปีที่แล้ว

      @@BestCarFixes yes the coil have power when I'm cranking it and any way I change the relay and nothing the coil get power and ground but not signal the only I can think is a bad ecu but it don't have symptoms of bad ecu? Thank you for u help

    • @BestCarFixes
      @BestCarFixes  3 ปีที่แล้ว +1

      you welcome

    • @pilotohernandez1569
      @pilotohernandez1569 3 ปีที่แล้ว +2

      @@BestCarFixes I send the ECU to get check and I was told it's good but still not spark not trigger signal yes it have rpm signal it have injector pulse I check the wiring from coils to ECU signal and wires are good still change crankshaft sensor and crankshaft sensors and nothing any other things to check?

    • @renanpatolilic7308
      @renanpatolilic7308 ปีที่แล้ว

      Bro. I have the same problem. Soo how did you solve the problem?

  • @MrLuisito214
    @MrLuisito214 2 ปีที่แล้ว +2

    mime has no spark, but at crank the service engine soon light goes off

    • @Sic3r
      @Sic3r ปีที่แล้ว +1

      Mines does the same thing, where you able to fing the issue?

    • @renanpatolilic7308
      @renanpatolilic7308 ปีที่แล้ว

      Yeeh mine also. 😢

    • @DaMcNastyMan
      @DaMcNastyMan ปีที่แล้ว

      Man this boat is full. Trying to figure it out now on mine.

  • @isreal9615
    @isreal9615 3 ปีที่แล้ว

    My check engine light flashes what does that mean?? And it won't start 05 150k miles

    • @BestCarFixes
      @BestCarFixes  3 ปีที่แล้ว

      see what code you have

    • @famholland469
      @famholland469 3 ปีที่แล้ว +2

      Any codes? No codes can point to ECU or Electrical connection in under hood fuse relay box near fender check grounds relays fuses especially those connecting to computer. Good luck

    • @isreal9615
      @isreal9615 3 ปีที่แล้ว

      Before my battery died after so many attempt the code it had were p1279 and p1278 and p0420

    • @pilotohernandez1569
      @pilotohernandez1569 3 ปีที่แล้ว

      @@BestCarFixes hey I have a 08 Pathfinder v6 vq40de engine it shut off by her self I change crankshaft sensor and both camshaft sensor the fuel pump it turn on and injectors work but not spark signal the coils have power and ground but not signal and I have RPM signal the scanner connect and don't show code and the key light on the dash shut off when I turn switch to on so only problem not signal to the coils?

  • @roberttate9901
    @roberttate9901 ปีที่แล้ว

    So why wont it start?

    • @renanpatolilic7308
      @renanpatolilic7308 ปีที่แล้ว

      I have the same issue , no pulse signal from ecu that goes to the ignition coils. The problem is timing,the timing chain is already stretch.

  • @train4905
    @train4905 2 ปีที่แล้ว +1

    Nice testin

  • @JuanGonzalez-qr1pc
    @JuanGonzalez-qr1pc 2 ปีที่แล้ว +2

    you are a terrible mechanic man... i feel bad for your customers

  • @jaym6187
    @jaym6187 2 ปีที่แล้ว

    What scanner is that