I appreciate that man. But make no mistake when we are racing in the champ series, the hammer comes out. 🤣 if it works it works. I just want to try and put the info that makes life easier for people. A junk toaster oven is cheaper than most hammers anyway lol
Dad noise @02:50 😮 You think an air fryer would work to heat bearings also? Genuine question tho; since there isn't much of a time crunch on this project, and you have such care for detail and quality, why did u leave the trans case un sand blasted or painted?
@@berttnotbought804 yes especially if the bearings were tapered or spherical. thank you for providing the details and a detailed build into the diff installation.
Hey no problem. I’m super happy to hear you appreciate it. It’s the whole reason I do it. These bearings are ball bearings. I’ll be honest I don’t have a lot of experience with the taper bearings but to my knowledge if a Honda has a taper bearing it’s a two piece with a conical race that goes in the case first then the other race and rollers are pressed onto the diff hub. Can be installed using the same method.
Hello, "Bertt Not Bought" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?
@@berttnotbought804 1. Title too long-not SEO friendly, 2. Description too short-not have keywords, 3.tags too short-not high rank volume tags, 4.Not doing checklist 5.backlinks- need to fix
Great job man. Interesting to see how you did it vs my incompetent a**
I appreciate that man. But make no mistake when we are racing in the champ series, the hammer comes out. 🤣 if it works it works. I just want to try and put the info that makes life easier for people.
A junk toaster oven is cheaper than most hammers anyway lol
Dad noise @02:50 😮
You think an air fryer would work to heat bearings also?
Genuine question tho; since there isn't much of a time crunch on this project, and you have such care for detail and quality, why did u leave the trans case un sand blasted or painted?
I looked into dry ice blasting. May still do it. But for now. It is just a dirty old 4 cylinder.
what diff bearing was used for the differential?
Are you asking for part number? I’ll have to check later but it looks like it’s 91005-PG2-004?
@@berttnotbought804 yes especially if the bearings were tapered or spherical. thank you for providing the details and a detailed build into the diff installation.
Hey no problem. I’m super happy to hear you appreciate it. It’s the whole reason I do it. These bearings are ball bearings. I’ll be honest I don’t have a lot of experience with the taper bearings but to my knowledge if a Honda has a taper bearing it’s a two piece with a conical race that goes in the case first then the other race and rollers are pressed onto the diff hub. Can be installed using the same method.
Hello, "Bertt Not Bought" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?
My channel is doing just fine thank you. 👍🏻 I’m not looking to gain anything from this. My only goal is to help others and entertain.
@@berttnotbought804 1. Title too long-not SEO friendly,
2. Description too short-not have keywords,
3.tags too short-not high rank volume tags,
4.Not doing checklist
5.backlinks- need to fix
@@berttnotbought804 Do you want to fix?
No thanks! I am just fine without your help 👍🏻 go tell someone else how to run their channel. It won’t fly here 😘
But he only want to help you cuz he like you. Lmfao.
The posts are creepy and reek of a SCAMMER!