ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- This video will show you how to replace your rear brake pads on a 2018-2021 Honda Accord and Civic. It is very simple to do and only takes about 10 minutes or so per side. Thanks for watching!
* Be sure to engage the ebrake after replacing pads to set them. Doing one side at a time start to finish.
Honda rear brake pads
Part # 43022-TVA-A04
Cliper piston compresser tool:
amzn.to/3oBo1ys
Dupli-Color caliper Paint:
amzn.to/3wgVPTX
Brake Cleaner:
amzn.to/3ucj3Jz\
**** List of mods and products I use:
Using these links helps support the channel and is greatly appreciated! 🤘
Vantrue N4 Dash Cam:
amzn.to/3tQ2x3N
Memory card:
amzn.to/3J7x2si
Hardwire kit: (what I used)
amzn.to/3vWcj71
OBD2 Hardwire kit:( just plug into obd2 port another option)
amzn.to/3IrmcfA
PRL FMIC:
stores.axionin...
Dragy 0-60 and 1/4 mile timer:
burgertuning.c...
Trim removal tool kit:
amzn.to/3uix3U1
Accord 2.0t Catch Can (Red or Blk):
amzn.to/3CViXvm
Accord 1.5t Catch Catn (Red or Blk):
amzn.to/3snCTlH
Camera used:
amzn.to/2VdWs3A
Mishimoto Intake:
amzn.to/3wptP02
Front Splitter:
amzn.to/3A1uya6
Ktuner V1.2:
amzn.to/3bTZ4cv
Ktuner V2:
amzn.to/2RupBWv
Phearable Stage 3 tune:
phearable.net
H&R 20mm spacer part # 4065640
amzn.to/2S8vwjX
H&R lowering Springs
amzn.to/3oudQeL
General G-MAX AS-05 245/40/19
amzn.to/3uZb6c0
Dupli-Color caliper Paint:
amzn.to/3wgVPTX
Red Turn Signal Overlays:
amzn.to/3Aw9kSz
Hybrid Solutions Ceramic Spray:
amzn.to/3v9Uq1n
IK Foam Sprayer:
amzn.to/3jVILPg
Microfiber towels:
amzn.to/3weJHTA
Lasfit LEDs and Floor liners: 10% off us promo code "DanVilla"
*
*
If you would like to purchase a JB4 please use my link!
JB4 Link:
burgertuning.c...
*
*
Lasfit LED lights bulbs: please use my link: lddy.no/rbjn along with my personal discount code "DanVilla" for 10% off site wide
Instagram:
www.instagram....
* Video is to show and teach from my experience, I am not liable for any damages anyone causes to their own vehicles. *
#honda #accord #brakejob #howto
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
Thank you very much for probably the most helpful TH-cam videos I've ever watched. I don't know the 0:11 1st thing about brakes but my son can over with his 2016 civic and we replaced the rear pads with needle nose pliers and all. No lights flashing and no more squealing. Keep the diy stuff coming. Saved a lot of money I don't have.
Thanks I appreciate it! Glad I could help put once again
Thank you! I have always replaced my own brake pads, but with that electronic parking brake I was worried I wouldn’t be able to do my rear pads. Thank you for this video!!
I'm glad you're spreading the word about how totally unnecessary it is to remove the back cover of the electronic parking brake unit to retract the piston. By turning the piston as you did, it performs the same function as if you had opened the back of the EPB unit and turned the screw by hand. I don't like the idea of opening the EPB and exposing it to possible contaminants. Either way will work, but it's a lot easier to just turn the piston. In my case, I used a piston rewind tool and once the piston stopped turning, I had to also retract the piston further straight back using a typical piston retraction tool to accommodate the new rotor/brake pads. The other 2 methods are to use a very expensive scan tool or hook up the EPB leads to a 12V battery, but why go through all that trouble when you can simply use a piston rewind tool or in your case, a pair of needle nose pliers. Bravo!
Followed this procedure with the correct compressing tool and OEM pads on a 2018 Accord. It worked flawlessly, no error codes, no damage to the parking brake.
This guide was super helpful, I was able to repair my back breaks. I want to give advice to others. When tightening the piston, if you turn it all the way to the right (can no longer rotate) and the piston is still up, use a c-clap to push down the actual piston.
Dealership wanted 260 for rear brakes
I paid 150 for car jack, stands, brake piston kit, and Honda pads, plus I’ll be ready for the next maintenance job now that I have the tools!
Thanks for making this videos, it really does simplify everything. You’re the man!
Thank you! The tools will pay for themselves time and time again.
You poor soul. That's how the addiction starts! I was in your shoes 6 yrs ago. My little $20 tool kit I got for a front motor mount job turned into a tool repertoire $3k+. I'm a mess. Now I'm rebuilding engines, replacing clutches, and begging people in the corner to let me fix their cars. It's and addiction... I hope you get the help you need before it's too late 😉
Dannnggggg your car comes with a jack…. So probably could of even done it for cheaper aha
Dealer wants $700
They quoted me $650 for rear pads and rotors!😱
Did my brother's 18 accord. He was telling me about the e brake motor thing... I was like wth you talking about. He showed me a video with the guy doing that. I never seen nothing like that. I searched myself and found this video. Just like I thought... Regular brake job lol. Just did his brakes and it was smooth. Thanks!
I followed that video and I think it was the reason my brake system light has been on 🤦🏽♀️
Wish I would’ve seen this video earlier
You're a life saver. My brakes were squealing and I needed my car for work. I bought the pads and the tool. Done. Now I can breathe easy.
Great job , thank you for the knowledge on compressing the piston , i got the tool now thanks to you i know how to use it and how it works .
You're very welcome, glad I was able to help!
Where did you buy the tool?
@@brandonruiz9115 autozone or O'Reilly. I prefer to buy a master brake kit. On amazon they're like 50 bucks
I performed the same procedure on my mom's 2019 Honda Accord, which has an electronic parking brake. However, her brake pads had worn down to the metal, necessitating a rotor replacement. I used a caliper push-back tool, and everything functioned correctly with no brake lights or issues. Soon, I'll be applying the same process to my friend's 2018 Honda Civic rear brake pads. I hope it works as smoothly as it did with my mom's 2019 Honda Accord. Hopefully, the brake light issue isn't inconsistent among some Hondas.
im glad i found this cause my rear pads are also about half way worn out at 17k miles. it seems that the accords use the rear brakes more to compensate for dipping in the front under heavy braking, so they wear out much faster in the back. ive been getting more into maintenance but wasnt sure how to do the rear brakes cause i knew that the e-brake requires some special tool or something. awesome to see its really that simple.
Dammm 17k I got 31k on my 2018 and I’m about to change the pads for the first time now front and back no squeaking yet
Same here. 19k and they are about 30% remaining in the back and 80% in the front.
What? Do you guys live in the mountains or something? I'm going to look at my rear pads tomorrow and I've got over 80k miles on them. I am a very conservative driver though.
@@djsae Not mountains, but hilly. Many newer vehicles all wear rear pads quickly to prevent dive when braking.
I'm 66K and dealer said I need to replace them but NOT for $650 lol so here I'm 😂
Awesome video! You're going to help a ton of people with this one.
Thanks, hope so!
Thanks for taking the time to make this video!! That’s probably the easiest brake job I’ve ever seen!!! Keep them coming!!
Thanks appreciate it! 🤜🤛
Saw many videos but this one made easy as a piece of cake.
@@DanVilla7 quick question, same process for a 2022 Honda Accord hybrid sport?
@@mohammedrashel1888 I would assume so. I haven't actually put my hands on one so I can't say for sure it's the same.
@@DanVilla7 thanks champ
Thank you! Just watch another video first, and I've done my own brakes on every car I have owned. I was worried for a minute, didn't think it should be that hard.
I just did my Rear Brakes on my 2018 Accord 2.0, I used your method with the needle nose pliers because I only have a C-Clamp and not a brake caliper tool. It worked perfectly when you get the hang of how to grip and hold the pliers to push and turn the piston in. I did actually remove the electronic parking brake actuator as well. Everything worked out 💯 nice smooth strong braking. I put this off for 6 months and was finally able to complete this from your video. Thanks bro 🙏
You're very welcome!
Easily one of the best DIY videos I have watched, no BS wasted time. Just to the point. I have changed brakes on my other rigs but never on the Accord. Just good to be able to get have the confidence I am doing things correctly. The only thing you didn’t show that I would have been interested in was freezing the bolts. Your camera died and I think you may have forgotten. I am sure I got it but like I said I watch these video just
To make sure I am going to be doing it not only correctly but efficiently. I want to thank you and I have subscribed and liked and look forward to looking you up for anything else I might need
God bless you man! Not only did I learn a new skill I saved some money. TY!!!!
I’m due for brakes on my 2018 Honda accord sport so thank you for your video. I’ll probably watch it two more times before I attempt. 😂
Thank you bro , much love . Took the car to Honda for a recall and they were charging me 324.00 to replace front pads . Did what you said and took me like 20 min each side works great .
No problem glad I could help!
Bro, you been a lot of help. I replaced the front ones but not the rear ones because I thought it was going to be more difficult because I thought there was more to it with disconnecting that plug, thank you so much, great video bro 👍🏼👍🏼👍🏼
This video is effin fabulous!! Couldnt have done my rear brake pads without it. Keep up the awesome work bro!!
Great tutorial. The brake tool kits from Harbor Freight or Amazon really help things out. Like the creator said, once the piston stops spinning, you need to compress it the rest of the way in. The kits will have both adapters. Don’t use a C-Clamp to compress the piston or you’ll end up damaging the housing on the electronic parking brake. You really don’t even need to disconnect the wire from the caliber. There is plenty of room to work with.
Thank you so much for this video. I watched many videos and they had me trying to take off the harness, and the rear of the caliper apart. So glad I stumbled to your video. This was a lifesaver! I did have to use a c-clamp to help it compress on mines. Thank you again! Much appreciated content.
Awesome glad I was able to help!
Thanks bro. You explained every step of the process simple.. you saved me time and money
You're welcome!
One of the best explanation about rear brakes, beautiful job.
Thanks appreciate it!
Was worried about this since I heard all about how difficult it was to do the brakes on my 22 accord now I can chill thanks to you bro !
Happy to help!
Thank you very much! I watched a couple videos before yours and I was confused but you broke it down so that a baby could understand!
This is a $300+ job at the dealership in cali good job bro
Absolutely WHAT Everyone Needed for - E-Brake system on Honda Accords 2018 & Up - Thanks Dan ~ Enjoy Your Video's ~ Fast Like Me !
Thanks you answered my question the only thing not clear so I need to have my car ignition on during the job or after caliper release pressure I can turn it off
Leave it on the whole time, after pads are installed engage the ebrake to set the pads
Thanks you bro. You save me a lot of money and time there was some mechanic trying to charge me a fortune saying they needed to take it apart 😂. I have never changed brakes before this was my first time and it was very easy with your vid. hope it help many others like me
Glad I could help!
This is a great video ,very informative, up to the point. before this video ,I watch couple of the videos that made it seem like I was gonna take apart an engine .I did my front brakes yesterday took me 15 minutes on each side ,and then I watch the videos on the rear brakes ,and I was like oh man !!!!!! but, after watching this video it’s calmed on my nerves.
Also, have you’ve had any problems with the calipers locking up on you. I’ve read a couple of people would get their brakes locked , because of not resetting the computer code on the honda..
Nope operating totally normal. E-brake works fine as well
So simple and easy, I was worried bcas of all the previous videos I saw about the e-brake, now I'm not, great video bro thanks much👍🏾.
This video was extremely helpful and made me not have to worry about taking it to a dealership thank you for your hard work much appreciated 👍👍👍
You just helped me tremendously! Ur smarter than most mechanics. Thank you for the video
Thanks - first time doing my wife’s 2019 Accord rear pads- very helpful, Luis
No problem, glad I was able to help!
Very, very helpful. Thanks so much. The needlenose pliers were a life saver. You saved me lots of time and money. Again, thank you.
Glad I could help, it did work well. Like I said in the video I would recommend using a proper caliper compression tool like the one I linked in the description
Great video man. Helped me at my job..I left d jumper booster under d hood ,hooked 2 d battery. left d key on all time during job and piston went in.didnt take d caliper apart saved time.snapon scanner didn't work...thanx a lot
Thank you dan! Just left the dealer and I was having some wearing on the back brakes so this video definitely helps!
Glad I could help!
Good job; I was wondering if I had to buy a scan tool or something to release the e-brake... Thanks for clearing that up 👌
Hello from Ukraine. Thank you for the video. Now I can do this work myself.
You're welcome! I can't believe I have people watching overseas. Pretty cool
Very detailed video man! Great job! I was skeptical about the electrical brake! My brakes are due soon!
Wow. Great video. I have been doing my own brakes since 1966. Disc brakes are so much easier than drums. But I have been afraid to try replacing my rear pads on my 2018 Accord because of the E-brake. Several videos warn about generating error codes for the computer. But you seem to have successfully avoided that.
Thank you! I have had no error codes since the job was done.
@@DanVilla7 I replaced the rears today. It was slow for me, my Needlenosed pliers should have been thicker, but it worked. At 34,000 miles I worried one of the pads may have gotten into the rotor, but the wear was far less than I thought. Thanks once more for the great information.
You're very welcome, glad I could help!
@@camcoulter5993 exact same thing happened to me also at 34,000 miles - thought it was weird a rear brake went out before either of the fronts (although now I know front are bigger which makes sense); on the rear left the piston being out to far before taking pads out seemed to wear one of the pads completely down (past sensor) but other side was barely worn at all... 🤔
@@DanVilla7 First off, love the videos man - very clear and concise. I'm struggling hardcore with compressing a rear piston and made it worse by putting caliper back on car without pads to come back to after other wheels (turned car on and it reset it so it just fits the rotor barely 🤦🏻♂). I'm gonna reattach the black ebrake winder thing but when compressing should I have the car "completely off", "accessory mode/battery powers everything without engine", or "ignition/engine on"? I know doing anything with the handbrake in any of those modes is a bad idea before the new pads are on.
BTW: I designed and 3D printed a tool and "V3" actually works REALLY well and should for anyone else with a 10th generation accord (i'm assuming '19-'21 probably also have same brake cylinder). I used PLA to print and works just fine but if you want something that doesn't misshape/wear down then I'd say use ABS, even though PLA has a higher tensile strength. I'll drop github link to .stl file. I just used a Creality Ender 3 (only $170 - could not recommend enough, should be a common household appliance) and it takes less than 2 hours to print
wow the way you show how to do it , is so perfect. thank you so much. keep doing more video like this, whit good quality
You're welcome!
Great ..the main thing is tio turn your ignition to the on position before pushing the caliper back..Great tip..thanks
Thank you, I didn't realize that you needed a certain tool to depress the rear piston, the needle nose pliers worked for me, tough going but I got it done for my daughter's car, pain in the ass ,but what you going to do? Thanks again for helping me out. 😊
Thanks for the video man I just finished replacing my rear breaks by following exactly what you said on here. 2020 accord 2.0T you have a new like an subscriber
You made a great video bro. None of that yacky bs about your best friends dog having puppies or how your kid got an A on his test bs. To the point and proffesional. Thank you. The only change i would do is get the brake tool kit at most chain auto parts stores. They all have loaner programs. Otherwise, perfect diy video.
Thank you appreciate it!
I would like to mention that this may be a case by case scenario. I have a 2018 accord touring, for what that’s worth. I twisted and screwed the piston in as far as I could until it stopped and wouldn’t turn anymore, as you mentioned in the video. However when I went to reinstall the caliper it occurred to me that the piston still needed to compress at least another 3/8” to be able to fit back on. I had to hook up an inverter to run the motor in, then push the piston in by hand. I had to do this on both sides, which worked fine. It’s unfortunate I had to take this extra step but it still worked out
Thanks a lot for this video just saved me a lot of money
Very good video. I was stuck on the part where I needed to turn the car's accessories on to disengage the rear pistons. Nice Job!
Thanks, once you figue out how it works it's super simple
I’m glad I found this channel
Thank you I’ll be replacing my sisters rotors and pads in the coming days 💪🏾💪🏾
Thanks great video, 👍🏾 did mine in 1hr both sides... spot on instructions.
Did you put the car in maintenance mode?
Thank you man! I knew what I was doing but really just needed someone to do the whole thing !!
No problem, glad I was able to help!
Really good thorough process on the vid. I just had one question. Is it the same process for the front pads?
The front will be an easier process. You won't have to wind the piston back just compress normally,
and no electronic ebrake
Well done. Very detailed explanation.
This video was so much better than others I’ve seen, almost went to a mechanic until I found this video. However, my “brake” light came on and “brake system” light as well and the electronic park brake switch is flashing as well. Anyone else have this issue and anyone have a fix for it?
Thanks bro was stressing on that electronic thing you made my life so much easy
Thank you I appreciate the detail description as you're going along
You got it glad I could help
Thank you for your video. I was able to replace my brake pads because of it.
You're welcome!
You did a nice job with your video. Thanks for saving me some time with the e brake!
Yes he did
Lots of thanks your video will help lots of people
God bless
Thank you Sir! This worked for my 2019 accord. GB 😊
👍
Man I did this myself in my buddy's shop and boy...
Did not enter service mode, did not do this in auxiliary mode...
Rear-right wiring harness to the motor... the wires fell out of the clip, so I spliced it.
Ordering a new wiring assembly, and now I have to pray and hope that entering Service Mode with the scanner (which we had the whole time), taking it out, clearing DTS, then driving it for 15 mins, then engaging/disengaging EPB fixes this problem. Hopefully I didn't fry the motor.
Any input is welcome.
Great video as usual!
Thanks brother appreciate it!
I know I’m a few years late to this video. Thanks for posting! Is it the same procedure for the front brakes?
The front are easier no electronic ebrake
Appreciate you pops ima take on this today and was just worried about the e brake
Excellent video. I will follow this when I'm due. Would love to see a Front video too, when you need it : )
Thanks, the front is even easier although I haven't had the need to do them yet.
I just changed mine perfectly
Great video I just changed my brakes and it was easy…keep up the great videos
Thanks!
Great video 👍 gonna do my brakes next week!
Thanks so much for the useful info. Saves me time and money!
No problem!
Question: does the car need to be in the on position the whole time the job is being done, or just to release.... and then you can turn the car off until finished? Thank you in advance.
I would leave it on so you can disassemble. Once you compress the piston you can turn it off. Make sure to set the side your working on before moving to the other side and repeat the process
I’m confused about something. You turned the caliper piston clockwise (from a point of view of facing the piston surface), but in another video I watched by RB the Mechanic, he effectively turned it counter-clockwise (from the same point of view mentioned previously). How is that? Could it be because you were working on the passenger side in your video, but he was working on the driver’s side in his? Do you remember having to turn it CCW when you worked on the driver's side?
I turned it clockwise. I showed me compressing the pistion on the drivers side.
Well explained video.... thank you for clarifying about EPB. I watched few videos for Honda's rear brake job and it confused me how to go about retaining piston. I will try this now on my 2016 Honda Civic and hope this works. Just to confirm, I should turn ON accessories mode before turning piston clockwise right? Thank you once again!!
Yes you won't be able to even get the brake pads off unless you do so. Just leave ignition on and then it's just like any other brake job
@@DanVilla7 Do I need to disengage Parking break ?
@@rumble329 absolutely otherwise they wont come off
Nice job You is the only one do it so simple and easy
Thanks, yeah seems that way
Changed my brake pads today (front and rear) and all went well. Your video was the most helpful of all that I'd seen. Question: My rear calipers and rotors (both sides) were hot to the touch after about a 20-minute drive. Fronts were fine. Is there a like a break-in period or something after which they will return to normal temps? I don't think I forgot anything - and NO parts left over!
Thanks! The rears seem to just engage more than the fronts for some reason. I still haven't changed my front pads. My past vw was the same changed the rear way before the front so seems pretty normal for rears to hear up more during normal driving. I. Aure if you were doing hard braking the front would have been very hot
Maybe cycle the parking brake on and off a few times?
Ugh I love you bro , good shit man ! Thank you for explaining everything g!
Haha no problem glad I could help
Great stuff, thanks Dan!
Looks like you put the outer pad on the wrong side. Arrow was pointing to the rear, or counter clockwise. I wonder why they do that?
Also you can retract the piston through the connector on the motor using reverse polarity. But it's easier this way. Imo
EXCELLENT VIDEO AND EXPLANATION
You got those pads at a good time. Its out of stock in alot of places, on line as well.... I called My dealer today and they have none, and they told me only one other dealer in my area has them in house. The pads are on back order until further notice , that's what the dealer told me .front pads are easier to find , not the backs.
Wow crazy. When I called the dealer by me they said they had plenty in stock. I guess I got lucky.
Helpful video bro just did mine today thanks 👍🏽
Good Job my man...thanks!
Do u have to put the parking break on?
Great job Brother thank you for the video. God bless you
Thank you so much it help me
So, the rear has to be screwed back in and not just pushed like the front ?.
Thank you for this video bro
Getting ready to do this.. SO you use needle nose and push in and turn RIGHT at the same time correct? Guess you can just press straight in to compress piston? Thanks..
Turn clockwise and push in at the same time
@@DanVilla7 Thanks for the HELP! Took Honda to dealer for a recall and of course they came back saying needed rear brakes and gave estimate of $320. Ordered OEM brakes online $70 after tax and shipping. Wasn't hard and the longest part was jacking up the car with the cheapo spare tire jack. No squeaks and no lights. Used loaner tool from O'Reilly Auto Parts. Front brakes next.
Very good video well explained and seems quite easy 👍
Theres like 4 ways but this is the best lol just turn it slow rent the tool from autozone or O'Reilly. Brake Caliper tool 👍
Thank you so much for the instructions.reslly helped me...
Awesome glad I could help
Great video thanks!
Thanks buddy just replace my breaks
Thanks for this video! Did this job this morning but when I did the left side rushing because a storm was starting I forgot to put the car in Aux so I still had about an inch to go before the caliper would go over the breaks. I didn't have that brake caliper tool so I was trying everything to get that piston back.
I pressed the brake and set the e brake so I could start over and same outcome? I even took the back off the caliper and turned the back shaft, it gets to a certain point and stops and still no progress. I ordered that tool which should be here Mon. I'm going to try that but if nothing happens I'm just going to order another caliper.
So ended up having to call various Honda dealers to order another caliper, end result they all said theirs a nationwide back order on them and they have no eta when they will be back in stock! I did however track a 2019 caliper down from a salvage yard. Everything worked out fine with the 2019 replacement! I'm going to mess around with the original and see if I can get it retracted. At least I'll have a backup.
For driver and passenger caliper piston, to compress both turn clockwise or is that just the passenger side?
You are amazing brother, thank you man
Thank you and your welcome!