Voice Controlled Home Automation Using Arduino & Bluetooth Module | Android App on MIT APP Inventor
ฝัง
- เผยแพร่เมื่อ 4 พ.ย. 2019
- #engineeringonline #proteus #mobileapp
The video explains how to control an AC light and DC fan on Proteus software through voice commands on mobile application
It is divided into the following sections:
- Circuit designing in Proteus
- Coding in Arduino IDE
- App development on MIT APP Inventor 2
- App testing on Android phone
MIT App Inventor 2 Website: ai2.appinventor.mit.edu/
Download Bluetooth library for Proteus: www.theengineeringprojects.co...
How to download Proteus:
• An Introduction to Pro...
Download Proteus software from:
getintopc.com/softwares/elect...
How to download Arduino IDE:
• Interfacing of Arduino...
Download Arduino IDE from:
www.arduino.cc/en/Main/Software
You can also book your one-to-one consultation session here: www.mentoga.com/Humaira-Rana-...
Follow us on:
Instagram: / engineeringonline0
Twitter: / engonline0
Facebook: / engineeringonline0
Library Credits:
www.theengineeringprojects.com/
Copyright Disclaimer:
Copyright Disclaimer under Section 107 of the copyright act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. You can also book your one-to-one consultation session here: www.mentoga.com/Humaira-Rana-... - วิทยาศาสตร์และเทคโนโลยี
The video explains the automation with only fan and light. You can connect as many modules you want! Do you have any questions about this video? Please share your feedback in the comment section below. Thanks for watching the video. Cheers!
@Ehsan Farid It would be helpful
www.electronicshub.org/voice-activated-home-automation/
@Ehsan Farid this message usually pops up when the Bluetooth of the phone is not turned on or it is not connected to the PC Bluetooth.
@Ehsan FaridIf you want to interface Bluetooth and wifi module this link would be helpful
circuitdigest.com/microcontroller-projects/hc-05-bluetooth-module-interfacing-with-esp8266-to-control-an-led
@Ehsan Farid Yes this configuration is possible
I am getting this type of Arduino in my Proteus software, what I got is Atmel328 IC diagram.
Please interface Arduino with 7 seg ment display in proteus and show example. mine is not working
I really appreciate the way you explain everything. I have some suggestions which I feel can make your channel better. instead of repeat the making of app in MIT every time, just show the app directly and keep a separate video of making an app on MIT which I hope you already made. by that way you can save a lot of time and that time you can utilise somewhere else in the video i.e, why the relay used? why the transistor used? kinds of knowledge. that will make the entire video rich in contents. I wish your channel lead all in near future.thanks
Thanks a lot for your suggestions. I will definitely keep it in mind in future videos 🙂
personaly i learned a lot
mam! I have followed each and every step of your video and encountered some errors in the code that, we are giving the functionality of pin6 to pin 5 i,e when we say turn on light then fan is turned on so i have just rearranged them its ok now but one of the main problem in the Proteus is after giving first instruction like turn on light then light is turned on, but it's not taking the second instruction and we have to restart the simulation again and i have checked that my instruction is going from code or not by opening the serial monitor in Arduino IDE and instructions are perfectly moving and in proteus, i'm getting the error that "simulation is not running in real-time due to excessive CPU load "so please help me mam
If I add 1 more relay, do I need to edit the app or just edit the code?
It really worked, amazing and very informative video.
101 out of 100❤❤
Glad to know that :)
Can you please do a tutorial, where you use a different language to send voice commands through the app to the arduino. Something similar to this video but another language
It worked.!!!!
Thank you so so much.
Glad to know that :)
Very nice tutorial.please posting such interesting tutorial.it is very very useful.
Can you please explain how to pick a variable voltage source component in Proteus.
Also I want to know is there is a IR connectivity component available on MIT app inventor??
mam i am facing selection option problem could you please slove it
MP6050 simulation proteus please
Excellent project!!!
Thank you :)
Can you send me this file coding & proteus cricut file?
Excellent.
Thank you
I confused , mam , is it necessary to turn on our bluetooth of mobile in order to operate home appliances through this application that we made in MIT AI2 Companion ?
Yes the connectivity is through bluetooth
Bro while compiling I'm not able to upload the code as I'm not getting any edx file for me to copy and paste
just click ctrl+alt+s and will save hex files in same foldes as the code
you should have also explained the function circuit and also the need of component
Thank you for the suggestion.
You can discuss if you have any question
Hello, the link u provided in the description box for bluetooth module is not downloading because i didn,t see any download option in u r link, could u please help me to sort out the problem.
There might be an issue with the website. Email at engineeringonline0@gmail.com. I will send you
@@EngineeringOnline can you pease send it to me to because i have the same probleme this is my email sirine.kari@gmail.com
Thaaaaaank you so much
You are welcome 😊
This actually worked, nice. I just had to modify my COM port to match the ones available in the simulation, but that's on Windows being dog shit.
Good to know that it worked 👍
hi, how did you modify your COM ports? I have been encountering the same problem
I dont have any notification on COM port. How to fix this?
Open the Bluetooth connection on PC and then select the port on Bluetooth module in Proteus
hello mam i did every thing as you said but i am not able find my laptop in app when i clciked select connection
please help me in resolving this issue
Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!
Can you explain why my MIT apps cannot detect any bluetooth connection from bluetooth HC-05?
Have you checked on real hardware? Or you are talking about Proteus simulation
I’am talking about proteus simulation. The MIT apps will get bluetooth connection from the proteus right? But it doesn’t work for me.
Can you please tell me.... If I can add OTP based Door locking system with this project ...?
Yes
Did u add door locking with it, @English man.. If yes, please help me asap.. ujjwalpandey199918@gmail.com
👍 nice project 🎉
Thank you for appreciation
I was unable to get the output with the app but my project was working fine with AMR voice app. It would be great if you can generate app and post the QR code.Thanks in advance
Puneeth R I too had the same problem.can you help me with it
Sure I will do it 👍
@@EngineeringOnline I to facing same problem
Very nice explanation..
Thank you for appreciation !
Hi I was doing this for a project but the error 507 kept on popping and I can't connect on bluetooth
You can share your issue at engineeringonline0@gmail.com
Hi can I just use bluetooth and just skip the voice recognition?
Yes. Check this video
th-cam.com/video/eGXo5K19iqs/w-d-xo.html
@Engineering Online While connecting through getting error 507: Unable to connect. Is your device is turned on? How can i resolve this issue please help!!!!
Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!
@@mohammedawal4961 It worked. First started simulation and tried connecting bluetooth. Thank you so much ✌👍.
Hello
Weldone super
How can i build same curcuit with Esp8266 microcontroller.
Please reply
you can build it with real hardware. Simulation is not possible
me jb code run kra rha hu to error ha rha h
Sketch uses 3828 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 282 bytes (13%) of dynamic memory, leaving 1766 bytes for local variables. Maximum is 2048 bytes.
isko kese htau
Please contact at engineeringonline0@gmail.com
can i do this in rasp pi? i want to make a app based voice controlled feature. can u pls help
Yes you can
When I run Proteus simulator it just shows fatal errors encountered don't know what to do pls tell
Have you followed all steps during installation?
Error 507: Unable to connect. is the device turned on?
shows this error . how i can solve this ?
Please help me to get though this because i have to do a mini rpoject and aslo both my PC and mobile bluetooth are paired up but then also its showing error maam?
Pls help me maam
Did u get how to overcome that 507 error if yes please help me out
did you find solution ?
Please, Help me I am getting same error.
Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!
@@pa5119 hello, I have the same problem, did u find the solution?
Please tell me as soon as possible i am facing issue when i making this project
What is your issue?
Bro i fixed the 507 issue could u pls tell me how to fix the problem of it giving bad comments and is not accepted
Did you find any solution? I have the same problem :c
Did you get the solution if yes please help me out I am also facing same problem
Have you found solution ?
Please, Help me I am getting same error.
@@edgaralainramosmesas5132 Have you found solution ?
Please, Help me I am getting same error.
@@nekargowda8705 Have you found solution ?
Please, Help me I am getting same error.
not getting hex file or any other file on compiling??
Did you check the link in compiler
Great video👌👌
Thank you
@@EngineeringOnline can you please send me the ardino code
Unable to get COM port in bluetooth settings what to do!?
Do you have Bluetooth in your PC?
@@EngineeringOnline yes!
Email the screenshot of your Bluetooth settings at engineeringonline0@gmail.com
I am unable to get the hex file location! After compiling
Check the hex file link in the compiler
I am having issue while connecting my app to pc. It is showing error 507; unable to connect. Is the device turned on? please reply...
Email at engineeringonline0@gmail.com
@@EngineeringOnline Done
@@anmolsoni890 is it working now? if yes then share the code please. siddhesh.phpale11@gmail.com
i need to put it in my report
Hi broo nice explaination but Where Does You Get the Program
Here is the installation video
th-cam.com/video/PsJeNMyGX3I/w-d-xo.html
im getting fatal error
Can u suggest home automation using raspberry pi?
Yes you can do it
Which app is this
MIT App Inventor
hello. Can i simulate this without any connection of hardware?
No hardware is used here. Only mobile phone and Proteus Simulation is needed
I need prgraming by mail ya whatsapp plz
Share your email, I will forward the program
@@EngineeringOnline sajidmanzoor353@gmail.com
@@EngineeringOnline qayyim@graduate.utm.my
Nice
Thank you for appreciation :)
Simulation is not running in real time due to excessive CPU Load. Please help.
Email at engineeringonline0@gmail.com
Does she answer u . Please need help
Plz share the apk file or project .aia file plz....
Kindly contact at engineeringonline0@gmail.com
Shouldn't we power the Arduino and the Bluetooth module?
On simulators, you don't need to do that.
hello and thank you for this video me the application receives the voice and appears on the phone but the lamp does not light and the fan please help me!
If the fan is not turning on it means the Bluetooth connection is not established
Hey can u give me this project
@@EngineeringOnline maam in MIT app it shows bluetooth is connected but in the simulation neither of fan or light are work , I've check all the connections but nothing happen. plz maam help
Ma'am where can I find the code for arduino?
Drop an email at engineeringonline0@gmail.com
My bluetooth is connected but when I am giving commands it is not performing any action....plzzz help
I have written the exact same code as you...
are you receiving any error?
@engineering online ,could you please share the code of the project.
Drop an email at engineeringonline0@gmail.com
Thanks A Lot for amazing tutorial.I have a question 🙋 .
If i have to give just one voice signal to arduino using blutooth module what changes I will make in App Inventor Blocks.
Thank you for appreciation. I don't think there would be any changes because you are receiving audio in the form of text from the app.
@@EngineeringOnline Can you please send the APK file & code to abhi18881@gmail.com
@@abhishekr3688 shared
Can u make in English?
Hello
Proteus file link please
Files of project
Thanks
Drop an email at engineeringonline0@gmail.com
Error 507: Unable to connect. is the turned on?
show this error . how i can solve this ?
Please help me to get though this because i have to do a mini rpoject and aslo both my PC and mobile bluetooth are paired up but then also its showing error maam?
Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!
I designed the app and having some issues pls help
what are your issues?
@@EngineeringOnline can you please send the APK file & Code to abhi18881@gmail.com
how to download code for ardino
Drop an email at engineeringonline0@gmail.com
Can u send ARDUINO code & application link or application code
drop an email at engineeringonline0@gmail.com
Sorry
But I've done everything you did
But when it comes to connecting the Bluetooth from inside the app
It shows me ... ERROR 507 UNABLE TO CONNECT. IS THE DEVICE TURNED OF
Can you help me with that and tell me why and how to make it work please 💜
Have you found solution ?
Please, Help me I am getting same error.
Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!
@@pa5119 yes i found
@@jaykumartudiya5403 please help me out? I am facing the same issue.
@@AnjaliGupta-yi1uw sure ...! Drop your mail address..!
👍
Where can i get the code
Please drop an email at engineeringonline0@gmail.com
Guys pls send me the circuit diagram for this
Email at engineeringonline0@gmail.com
sorry for disturbing i want code tomorow i have review can you please share code
drop an email at engineeringonline0@gmail.com
Hi how can i Get the code from here?
Write an email to engineeringonline0@gmail.com
Can i get the code to this project?!
Drop an email at engineeringonline0@gmail.com
Where can I Find the code
drop an email at engineeringonline0@gmail.com
Arduino code link?
Please drop email at engineeringonline0@gmail.com
I just did it, not working
What are the issues you are facing
Send the coding link broo
Share your email
vtkrishna039@gmail.com
Can you please share the apk file and code for the project
Mail : venkatvanteddu19@gmail.com
Drop an email at engineeringonline0@gmail.com
please share the code I need this
drop an email at engineeringonline0@gmail.com
How do u copy and paste the circuit again mam
Select all those components you want to copy, then right click your mouse and select copy to clipboard and then ctrl+v to paste them
Ok thanks nowpls send a link of that code in the description box
Drop your email, I will forward you
itsankit2001@gmail.com
srakash37@gmail.com
or it will be helpful if u shared link of application
Please contact at engineeringonline0@gmail.com
Where is the code
drop an email at engineeringonline0@gmail.com
mam plz send the code
Drop an email at engineeringonline0@gmail.com
I am actually watching this in 2020 and thanks so much for a great work done.....I will really appreciate if you can send the source codes to my email address when you got this my comments much appreciated...God bless you and thanks in advance
Drop an email at engineeringonlone0@gmail.com
Do you have the code ?? Then please send me on chaudharyudit8795@gmail.com please
@@EngineeringOnline Ma'am I send an Email at your given given address but it showing email address doesn't exist!!!
@@nishthamishra749 did you got the code?
Very nice project
but i facing one problem
How can I help you?
Please share the code
Drop an email at engineeringonline0@gmail.com
I am create a app, but how to connect my Bluetooth module. Please 😭🙏😩
What issue you are facing
I am not seeing my bluetooth module address
@@EngineeringOnline thanks for replying
@@EngineeringOnline ooooh it is working.thank you
@@EngineeringOnline maam will you please forward me the code and app link...tommorow is my submission and my project is not running yet
Plz send me arduino code for it
Drop an email at engineeringonline0@gmail.com
Mam i hav mailed you regarding it bt i didn't got any responses from your side
Kindly send me arduino code as soon as possible
Please give me the code
drop an email at engineeringonline0@gmail.com
That's an awesome video can u share me the code pls
Please drop an email at engineeringonline0@gmail.com
maam pls help me asap maam
Can you give me all application file and code pls
sankarsanabehera05@gmail.com
shared!
Hello bro can u send the files on hethshah11@gmail.com
Code please
Can u send Arduino code & application link or application code
откуда можно получит код
no
напишите письмо по адресу engineeringonline0@gmail.com
You have a nice voice :) but you speak really fast I'm struggling writing down what you saying
You can play the video in slow mode (0.75x)
please send me fast urgent