Catalina 30 - Electric motor installation - Step 8 - Finishing the Installation
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2022
- I am installing an electric inboard in my Catalina 30 sailboat. The next step for me is to Finish this already!
As promised, a link to where I got Bedit Tape. Though the site didn't have any when I posted this.
shop.sailboatowners.com/prod....
Very helpful instructions: marinehowto.com/bed-it-tape/
If you have any comments, please leave them below!
Examples of acceptable comments:
This video is too long!
This video is too short.
Why you move so fast?
Why you move sooooooo sloooooow!
Why don't you talk more?
Please stop talking so much! You're giving me a headache. * (*or other pain)
Boats are stupid. I want to see more about n. * (Where n = some other thing you want to see more about.)
More acceptable comments:
Any other words. Preferably written in (but not limited to) a human language, that occur to you to write. - วิทยาศาสตร์และเทคโนโลยี
Good on you, for increased performance try swapping the pulleys, increasing the propeller rpm, the motor can handle it, it's up to you with the throttle as to what the motor can handle
Enhorabuena a quedado genial saludos desde la sierra de Madrid España
Thank you!
I did without gear reduction, straight to the shaft.
Hey good morning and congratulations. (translated into the human language)
I am looking into doing something like this for a conversion from gas engines, and TH-cam recommended your channel.
Did you determine the cause of the belt noise? It sounds like it's too tight.
Also, do the controls effect the binacle (compass)?
I'm going to check out the build videos and get more information.
Good job with the install and the editing skills
Hey, thanks for mentioning the belt tension. I will re-tighten it and see if that helps. :D I haven't noticed an effect to the compass from the throttle, but I will check that out as well. Now that I have finished the install, I am going to make a HowTo video, explaining all the steps, with more organization to make thing clear. I think the videos I made are helpful, but they could use more information. :D
@@openrov272 chain ⚙️, PLASTI DIP Multi - Purpose Rubber. Quiet then 😉 th-cam.com/video/6fuIjaXSCxk/w-d-xo.html ..
that a thunder bolt motor ? good job!!! when is the seat trials ?
The video is out! I will do a longer video soon. :D
th-cam.com/video/B2Vr8MfKe2s/w-d-xo.html
I wonder how much time you get at a full charge
I have a spreadsheet I plan to keep updating. It only has the first trip on it so far. I've ordered the parts to allow me to gather all the data (in theory) so I should have better information a a couple weeks. It depends on how fast you try to go. :D There is a rough rule that for every speed increase of one knot, you double the power use. Sticking to 3 or maybe 4 knots has been said (by others) to be the sweet spot between efficiency and speed. BUT, if you have unfavorable wind and/or current, you won't be able to go 3-4knots without spending more current. I know. Clear as mud. ;D
docs.google.com/spreadsheets/d/1F4wzebWAjTi9NIrt5Q83grkxLKKXXVND-zIz-L8i4cE/edit?usp=sharing
Hi, watching your video… I am looking a electric motor to drive my boat props. May i know where can we buy this stuff?
This is where I got mine. :D www.thunderstruck-ev.com/electric-sailboat-kits-and-accessories/
Thanks so much for sharing this . I’ve been looking everywhere for a more affordable electric setup 🙏🏽⛵️⚡️
What brand of electric motor (specs),kit?
It's a thunderstruck motors kit. 10KW motor. www.thunderstruck-ev.com/10kw-brushless-sailboat-kit-sevcon.html
My worry is about how long it will last. I'd be happier with a water-cooled one
I recently installed one in my 1982 Hunter 27 and it runs great. Have you figured out what is causing the high winding noise?
bolted without and cushion or anti vibration mounts
The main problem is that there was no cover at all over the motor. I've checked belt tension and it seems right. With the seat/motor-cover back in position, it isn't loud, but I will be keeping an eye on the belt for wear.
According to Thunderstruck, you don't need the anti-vibration mounts. A diesel or gas motor has a lot of vibration, which those mounts solve. But the electric motor shouldn't vibrate in operation. (unless it's broken.) Time will tell if that is true.
@Jamie Lozada Is your motor much quieter? My belt might be riding too close to the edge of pulley hub.
@@openrov272 yes. There is a soft whine.
Can help it that despite what I see a great effort it Seems enormously under powered for going against current or rougher seas plus the weight of the boat. The bracket does not look very stable. And is that Belt functioning under a mis alignment? Of is that due to the filming? Then there seems to be no cooling for the prop shaft.. an issue in itself given water cooling doesn’t go well with electricity. having said that.. it’s a start but that does have to be the end.
He has a dripless prop shaft installation. The bearings remain water cooled and as long as his shaft alignment is good and there is little vibration the shaft will remain sealed with the graphite friction sleve.
I like my air cooled Chinese 168 F diesel. It's much cheaper and lighter than electric and it charges a battery well. The dry heat is welcome.
Rather then showing the whole video real fast and see nothing. Edit out mundane so we can see something. Never finished.