Mercedes CLK 5WAY SQ System - PART 2 - Midbass + Front Subwoofer Installation - ESB Audio, JL Audio

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 มี.ค. 2022
  • If you want to see behind the scene content and learn more:
    / pssound
    Playlist to this project:
    • Mercedes CLK 5way SQ
    Social:
    / pssounduk
    / pssound_uk
    Website/webshop/contact:
    www.pssound.co.uk/
  • ยานยนต์และพาหนะ

ความคิดเห็น • 55

  • @chriswray2132
    @chriswray2132 2 ปีที่แล้ว +7

    The sub box surprised me, also i like how it fits so deep into the wheel well, plenty of room for the mid bass :)

  • @RJSDZNS
    @RJSDZNS 2 ปีที่แล้ว +5

    I don't normally comment because most people say what I'm already thinking but DAMN!!!!!!! This is about as high end as it gets. That box is unreal! Also the kick placement was awesome. Such nice work guys!

    • @explorinlearnindoing5462
      @explorinlearnindoing5462 2 ปีที่แล้ว +1

      You should check all his vids... they are almost all high end!

    • @RJSDZNS
      @RJSDZNS 2 ปีที่แล้ว +1

      @@explorinlearnindoing5462 I'm a subscriber, I was just complimenting bro

  • @SQ_og
    @SQ_og 5 หลายเดือนก่อน +1

    Cause we all love our Bosch jig saw as a bit of kit!

  • @mattnucci7716
    @mattnucci7716 2 ปีที่แล้ว +5

    You probably already know but some strategic use of cardboard under/as a part of your tape job prior to fiberglass, can give “ramps” or whatever necessary around edges to reduce that tight fit

  • @RajunCajun1
    @RajunCajun1 3 หลายเดือนก่อน

    I wish I had found your channel 2 years ago! I have a 2006 Honda Odyssey and I think it would make more sense for me to do enclosures the way you're doing in this car!

  • @charleshamilton6177
    @charleshamilton6177 2 ปีที่แล้ว +1

    Peter congratulations to you and your team. Another great job.

  • @AlexWayne1
    @AlexWayne1 2 ปีที่แล้ว +1

    very cool project. please make a video when its done where you play some music with the microphones in your ears. i really love those.

  • @gmcminitruck
    @gmcminitruck 2 ปีที่แล้ว +1

    Great stuff guys!
    I'm preparing myself for part 3!

  • @freeradical431
    @freeradical431 2 ปีที่แล้ว

    back in the late 80s i did an ib kick install. I used the holding power of the magnets to hold the speaker to the car body, install done.

  • @chh7681
    @chh7681 2 ปีที่แล้ว +2

    The deepness is so ur legs dont get crushed

  • @24cimbo
    @24cimbo 2 ปีที่แล้ว +1

    Love the work again!

  • @ulrickteissier363
    @ulrickteissier363 2 ปีที่แล้ว +1

    Thanks for this great video! Will love to see the ib install of the amarok ;-)

  • @loudelvis610
    @loudelvis610 2 ปีที่แล้ว +1

    Cutting the midbass with jig saw ....lol....that's old school ...nice!

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว

      With a new school Festool jigsaw! 😜😃🔊🔊

    • @loudelvis610
      @loudelvis610 2 ปีที่แล้ว +1

      @@pssound9749 lol...get it done...style points are for TH-camrs that don't actually do real world installs

  • @sainath8710
    @sainath8710 2 ปีที่แล้ว +1

    Nice install 👌

  • @470ruger
    @470ruger 2 ปีที่แล้ว +1

    Get yourself an air hacksaw,so much easier than the jigsaw

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว

      I have one, but compressor is not strong enough. 🤦🏻‍♂️

  • @Milana_Milos
    @Milana_Milos 2 ปีที่แล้ว +1

    The video is great! I have a question for you, I own two pieces of JLaudio 12w3v3-4 woofer, is it better to put both of them back in the trunk or to put one front and the other back?

  • @sammyb_tcg3485
    @sammyb_tcg3485 2 ปีที่แล้ว +1

    Excited for this build as it's not too far off from the equipment I have. Still trying to decide between using my Topping D10 or iBasso hi res player into the V Eight.

    • @sammyb_tcg3485
      @sammyb_tcg3485 2 ปีที่แล้ว

      @@rap-soldier2185 I have the iBasso DX240 with the same DAC chip as the topping D10. The problem is that the helix v eight doesn't take 192k sample rate through optical

    • @adamdaniells9521
      @adamdaniells9521 2 ปีที่แล้ว +1

      @@sammyb_tcg3485 unless you can hear over 48khz 96khz sample rate is plenty, I would always go digital if I can into a dsp so I’m not sure what difference dacs make in the devices

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +4

      Some people can’t listen to less than 384k these days…yet they wouldn’t hear difference above 44.1k blindfolded.. 🤦🏻‍♂️

  • @RajunCajun1
    @RajunCajun1 3 หลายเดือนก่อน

    I believe just to get better sound out of this 2006 Honda Odyssey will be better to do the things that you were doing versus adding a subwoofer all the way in the back!

  • @lawr3nc3mann84
    @lawr3nc3mann84 2 ปีที่แล้ว

    I did a system (4th box build in my life) in a CLK cabriolet. It came out nice but my sub was a JL 13.5 shallow on top of spare tire. It had a really good sound...but u are letting us know it could have a better sound in front?

  • @ranvijaydhami7246
    @ranvijaydhami7246 หลายเดือนก่อน

    what kind of material to bond wood and fiberglass. i am talking about the green one

  • @craigbarrett2278
    @craigbarrett2278 2 ปีที่แล้ว +1

    Those mercs do have big footwells.....

  • @pgroadglide1581
    @pgroadglide1581 2 ปีที่แล้ว

    Peter , in my Cadillac CTS, Im at my last component to buy a DSP
    My installer trying to get me to buy the
    Helix DSP mini MK2 ,
    Though I’ve always been a fan of zapco but from the 80s
    The zapco looks great and comes with dash unit, there both near same price
    What do you feel a better DSP ?
    Amps Taramp smart 5K
    And 4 ch, 1000watts AB
    Skar amp
    I have the LC8 too
    So zapco or Helix?

  • @mannine99
    @mannine99 2 ปีที่แล้ว

    filling with water to see how big it is and if it leaks? how i do it i install driver and take impedance curve and play if it leaks somewhere.

    • @saulidze
      @saulidze 2 ปีที่แล้ว +1

      and how do you find then the place of where it leaks..?

    • @mannine99
      @mannine99 2 ปีที่แล้ว

      @@saulidze pushing driver and listening, few needle hole size doesnt even matter. my latest box was 100% wood, i dont want to soak my box. and if you take impedance curve youll see possible internal resonances as well.

  • @chrisN80
    @chrisN80 2 ปีที่แล้ว +1

    Peter what is the price of a birch plywood in the u.k. In the u.s is 120 dollars in California.

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว

      £80-90 for the 3/4”, so similar.

  • @DarrinTorrey1
    @DarrinTorrey1 2 ปีที่แล้ว +1

    Where did you get that vacuum hose? What is it called?

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +1

      It comes with Festool vacuums.

    • @DarrinTorrey1
      @DarrinTorrey1 2 ปีที่แล้ว +1

      @@pssound9749 Thank you Peter!

  • @mrbiggz8526
    @mrbiggz8526 2 ปีที่แล้ว +1

    What are the best head units for sq ?

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +2

      Head Unit? Haven’t used one for 6-7 years! DAP/phone/tablet/DAC, etc.

    • @kellenstrickland3847
      @kellenstrickland3847 2 ปีที่แล้ว

      Sony xav-9500es is good option

  • @jamesbtri
    @jamesbtri 7 หลายเดือนก่อน

    Buy a small air saw

  • @MrColtnutz
    @MrColtnutz 2 ปีที่แล้ว +1

    No lock tite in that inner box screw???????

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +1

      No, but it has spring washer, so don’t worry!!!!!!! Ohh, few more !!!!!!!

    • @MrColtnutz
      @MrColtnutz 2 ปีที่แล้ว

      @@pssound9749 Perfect!! Thanks for the reply!!

  • @timmothy19
    @timmothy19 2 ปีที่แล้ว +2

    1st☝

  • @kostas133kostas
    @kostas133kostas 2 ปีที่แล้ว +1

    I don't understand how installing midbasses off axis in kicks is better than installing them in doors.🤔

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +5

      Axis of midbass in 3way where they only play between 60-400Hz doesn’t matter at all! Wavelength is too long to be directional.
      Door locations suffer from cancellations in intended frequency range, whereas kicks don’t. Doors are flimsy and have many rattling parts, kick are rigid. You can not list a single reason why doors would be better acoustically than kicks.

    • @kostas133kostas
      @kostas133kostas 2 ปีที่แล้ว +1

      I thought that a more on axis approach in kicks would deal with the huge dip around 150hz on driver's side.

    • @pssound9749
      @pssound9749  2 ปีที่แล้ว +3

      @@kostas133kostas never. 150Hz is over 2m long wavelength. You can turn that driver in any direction, it won’t effect that. You can try it though and see it for yourself! 😉

    • @midnightrider8105
      @midnightrider8105 2 ปีที่แล้ว +1

      @@pssound9749 That’s really eye opening. (Or ear opening ha) I always thought a well prepared door would be best. But yes that makes sense. Thank you for sharing.

  • @chrisd8102
    @chrisd8102 2 ปีที่แล้ว +1

    2nd

  • @peterplague
    @peterplague 2 ปีที่แล้ว +1

    3rd

  • @jackykimes
    @jackykimes 2 ปีที่แล้ว

    That smiley face in the left kick: th-cam.com/video/KwY--68W6k4/w-d-xo.html

  • @NserNyser
    @NserNyser หลายเดือนก่อน

    IT'S NOT NECESARY AND DONT COUNT FOR A CC CALCULATIONS