First upgrade I ever bought was a lantac bcg. Still use it and love it. Amazing to clean and maintain. I lost the gas rings on it and thought they should of lasted longer, But overall love lantac.
Yeah I hope this one can hold up to being suppressed. I don’t mind putting new gas rings on. I have a bunch of extra ones now. Unless it blows out every 400 rounds. Then I’ll probably be upset.
I have the 13.7in sabre and I've been very pleased with it. 500rds suppressed. 4,000rds without. I've had no issues with my bcg. Sorry to here abt your troubles. I was going to purchase the new 11.5 sabre with the rifle speed gas block but I've been following you since you got yours and this gives me pause.
To be honest I also still want to buy that new 11.5. lol it looks great. I think the 11.5 is just a lot harder in the parts, but still there are a lot of 11.5’s out there that don’t have this problem. I am happy with the barrel, and the upper a lower receivers. So far they have been excellent. It’s super accurate. It’s just been the bcg and gas block. I love the Handguard too. The new 11.5 should be just fine. I think my bcg had problems because it was a 11.5 that was suppressed without an adjustable gas block.
@@LetsTalkTactical yea. I think I'm still going to get the new 11.5 too lol. I bought a SOLGW OCKS BCG last month on sale for $150. Haven't used it yet. Probably put it in there. I was going to go wit SOLGW or BCM 11.5 but then I seen Psa was coming out wit theirs wit the rifle speed gas block and I was sold. On top of the great luck I had with my 13.7in plus I love those triggers that come with the sabres. Decisions decisions!
PSA sent me two Sabre uppers with sloppy installation on handguards, and oil-soaked gas block screws that weren't torqued. Upon arrival, one upper receiver has a patch showing bare metal, towards the tail end. PSA is good value...I'm just not sure if trying to get as many features on a budget will be worth the time and money in the long run. A properly made, properly gassed BCM upper that went through proper QC with a reduced backpressure can would be my pick for a bare minimum life-saving tool. SOLGW is even better for an out-of-the-box fighting rifle that is already perfectly gassed for both suppressed and unsuppressed. The only thing I changed is to upgrade to a Hiperfire Reflex trigger, that thing is crazy fast. SOLGW warranty EVERYTHING should anything happen, even if it's your own mistake or if the barrel got shot out. 😉One big downside is it doesn't generate nearly as much content and views when it's just perfect out of the box.
Wow. I would have been pisssd. This one arrived and everything seem great except no loctite on any of the screws. So when this starting having problems it caught me off guard. They qc’ed it good. Just bad quality parts. I gave them a chance. Going with Bcm or sons of liberty next.
Let's go! SOLGW complete rifle with their Combat V2 13.9 CHF barrel, CAT WB, and Hiperfire Reflex is some of the best fighting AR I have ever shot. Forget about PSA and bandaid solutions like AGB.😆SOLGW even got a better warranty and you most likely won't need to use that before you burn out the rifle. I might even put it on top of LMT when taking into account price, gassing, and CS.
Yeah, they are great fighting rifles. I want to get their 11.5. I’m hoping one day I can work with them. The original plan was to get their bcg but I found this enhanced by me for cheaper on sale.
great video my brother, I will 100% look into the geissele buffer system, youre not the first to mention it but I could hear the difference in the rifle when you showed your range footage
If you look inside the chrome lining portion of your carrier with a flashlight you should be able to see the surface and it's condition fairly well if it's not very smooth to the naked eye i would be concerned most well made bcgs that are chrome lined will have a very smooth interior i had an old psa mil spec bcg that was chrome lined that was very rough inside where the bolt ran and it was chewing up gas rings quickly too i only run solgw and bcm now never had an issue with them
@@yeshua1176 yeah I’m not impressed with the chrome lining. I looked inside this one and it’s already doing what the first one did. Scratching deeply at only 400 rounds.
@LetsTalkTactical I've heard good things about lantac i try to steer clear of anything psa at this point I've had a few uppers in the past that had qc issues I just build my own now using quality sourced parts
That’s exactly what I’m doing from now on. The only thing solid on here is the barrel and the upper and lower receivers. I’m about to switch the lower out to a griffin mk2 ambi. From now on I’m building my own.
@LetsTalkTactical That's your cost savings right there. They have to skimp somewhere. Your neighbors at SOLGW QC every bcgs they get from Microbest just to be sure everything checks out before getting sent out.
@ Yeah I know. I tried to reach out to them. No answer. My next rifle was going to be a Sons of liberty, but I might just bite the bullet and get a super duty.
Yeah man. Pretty big let down, and they won’t work with anyone unless you are garand thumb. I think I’m done with their stuff unless I just want a non series gun. From now on I’m going to geiselle or sons of liberty for a fighting rifle.
What tf are these guys doing at psa....are they like dollar tree quality or something...you dont skimp around w quality when your life could be in question...that said ive even had trouble w more reputable brands lately...idk what they are doing this type of stuff is wild to me
Yeah and I was super excited for this gun. I had no problems at first, and then BOOM! Problem after problem. I think I got all the problems taken care of now. This is the first gun from any brand that I have ever had problems with.
End result is NICE 👍
Thanks man! I got a new optic for it. Slowly upgrading one part at a time.
First upgrade I ever bought was a lantac bcg. Still use it and love it. Amazing to clean and maintain. I lost the gas rings on it and thought they should of lasted longer, But overall love lantac.
Yeah I hope this one can hold up to being suppressed. I don’t mind putting new gas rings on. I have a bunch of extra ones now. Unless it blows out every 400 rounds. Then I’ll probably be upset.
I have the 13.7in sabre and I've been very pleased with it. 500rds suppressed. 4,000rds without. I've had no issues with my bcg. Sorry to here abt your troubles. I was going to purchase the new 11.5 sabre with the rifle speed gas block but I've been following you since you got yours and this gives me pause.
To be honest I also still want to buy that new 11.5. lol it looks great. I think the 11.5 is just a lot harder in the parts, but still there are a lot of 11.5’s out there that don’t have this problem. I am happy with the barrel, and the upper a lower receivers. So far they have been excellent. It’s super accurate. It’s just been the bcg and gas block. I love the Handguard too. The new 11.5 should be just fine. I think my bcg had problems because it was a 11.5 that was suppressed without an adjustable gas block.
@@LetsTalkTactical yea. I think I'm still going to get the new 11.5 too lol. I bought a SOLGW OCKS BCG last month on sale for $150. Haven't used it yet. Probably put it in there. I was going to go wit SOLGW or BCM 11.5 but then I seen Psa was coming out wit theirs wit the rifle speed gas block and I was sold. On top of the great luck I had with my 13.7in plus I love those triggers that come with the sabres. Decisions decisions!
PSA sent me two Sabre uppers with sloppy installation on handguards, and oil-soaked gas block screws that weren't torqued. Upon arrival, one upper receiver has a patch showing bare metal, towards the tail end.
PSA is good value...I'm just not sure if trying to get as many features on a budget will be worth the time and money in the long run.
A properly made, properly gassed BCM upper that went through proper QC with a reduced backpressure can would be my pick for a bare minimum life-saving tool.
SOLGW is even better for an out-of-the-box fighting rifle that is already perfectly gassed for both suppressed and unsuppressed. The only thing I changed is to upgrade to a Hiperfire Reflex trigger, that thing is crazy fast. SOLGW warranty EVERYTHING should anything happen, even if it's your own mistake or if the barrel got shot out. 😉One big downside is it doesn't generate nearly as much content and views when it's just perfect out of the box.
Wow. I would have been pisssd. This one arrived and everything seem great except no loctite on any of the screws. So when this starting having problems it caught me off guard. They qc’ed it good. Just bad quality parts. I gave them a chance. Going with Bcm or sons of liberty next.
Let's go! SOLGW complete rifle with their Combat V2 13.9 CHF barrel, CAT WB, and Hiperfire Reflex is some of the best fighting AR I have ever shot. Forget about PSA and bandaid solutions like AGB.😆SOLGW even got a better warranty and you most likely won't need to use that before you burn out the rifle.
I might even put it on top of LMT when taking into account price, gassing, and CS.
Yeah, they are great fighting rifles. I want to get their 11.5. I’m hoping one day I can work with them. The original plan was to get their bcg but I found this enhanced by me for cheaper on sale.
great video my brother, I will 100% look into the geissele buffer system, youre not the first to mention it but I could hear the difference in the rifle when you showed your range footage
Thanks man! Yeah it sounds a lot cleaner. It feels smoother too. It’s not like a giant difference, but you will notice the difference.
Rusted gas block is crazy, especially with such little use. C'mon PSA.
Yeah man. That blew my mind. I could understand if you left it outside for multiple nights but to not see any moisture at all. That’s crazy.
If you look inside the chrome lining portion of your carrier with a flashlight you should be able to see the surface and it's condition fairly well if it's not very smooth to the naked eye i would be concerned most well made bcgs that are chrome lined will have a very smooth interior i had an old psa mil spec bcg that was chrome lined that was very rough inside where the bolt ran and it was chewing up gas rings quickly too i only run solgw and bcm now never had an issue with them
@@yeshua1176 yeah I’m not impressed with the chrome lining. I looked inside this one and it’s already doing what the first one did. Scratching deeply at only 400 rounds.
@@yeshua1176 the solgws BCG’s are great. I just wanted an enhanced one and I found it on sell for $200. So it was a steal.
@LetsTalkTactical I've heard good things about lantac i try to steer clear of anything psa at this point I've had a few uppers in the past that had qc issues I just build my own now using quality sourced parts
That’s exactly what I’m doing from now on. The only thing solid on here is the barrel and the upper and lower receivers. I’m about to switch the lower out to a griffin mk2 ambi. From now on I’m building my own.
Third option is That's why PSA's are cheap. Those bcgs should have been QC'd before even getting put in or sent out. Period
I agree. I don’t know how I got 2 bcgs that didn’t make it to 1000 rounds without issue.
@LetsTalkTactical That's your cost savings right there. They have to skimp somewhere. Your neighbors at SOLGW QC every bcgs they get from Microbest just to be sure everything checks out before getting sent out.
@ Yeah I know. I tried to reach out to them. No answer. My next rifle was going to be a Sons of liberty, but I might just bite the bullet and get a super duty.
@@LetsTalkTactical Yeah the Geissele is pretty nice. Just don't get the 13.9 because that barrel comes with a porn star sized gas port.
😂 yeah I planned on getting a 11.5. I love the 11.5.
It's basically not a PSA saver anymore lol
I know. lol. By the end of it I’m going to have a box of spare parts that you can build a whole Sabre out of. lol
Damn PSA, bad look! Not only did the BCG not make it to 1000 TWICE, yall not responding to emails either!?
Yeah man. Pretty big let down, and they won’t work with anyone unless you are garand thumb. I think I’m done with their stuff unless I just want a non series gun. From now on I’m going to geiselle or sons of liberty for a fighting rifle.
What tf are these guys doing at psa....are they like dollar tree quality or something...you dont skimp around w quality when your life could be in question...that said ive even had trouble w more reputable brands lately...idk what they are doing this type of stuff is wild to me
Yeah and I was super excited for this gun. I had no problems at first, and then BOOM! Problem after problem. I think I got all the problems taken care of now. This is the first gun from any brand that I have ever had problems with.