That battery can't provide the momentary high-amp load and you would be better off using an automotive battery with at least 200amp CCA rating. Your connections are week. These DIY PCB boards just act as a timer and current limiter and cannot bring more amps than the source. You need a good power source to get a good and strong welds.
I was view videos, alternatif for using battery 12v . Using 2.7 500f can help the battery, best alternatif buying bifrc..no capasitor and weak. Battery
mine is too..to weak...i tried also with 100Amps and 800Ca battery but it makes partks ar battery terminal and not to the spot pen! cheap and no good at all
Don’t buy something you have to complete it by soldering a capacitor or what ever. The circuit board are always faulty. Why didn’t the producer leave the easiest last bit of work before selling it?
@@charliemike5699 I'm starting to think that this board is basically trash, I've changed all wires from 12 to 8AWG and using I'm using a 10A 50c 3 cell Li-Po that during short pulses can supply current in the thousands, and still, this board has very short pulse time for a 0.20 nickel strip, I think the way to go is investing in Kweld, the best battery powered welder I've seen, not cheap at all though.
@@Eden_M oh yeah,kweld products are good...this cheapo weld are actualy for beginners who doesnt make some high performance packs...I remember watching someone here on you who modified this thing coz his welder burned a mosfett,I recalled he fixed whats broken and I think he added a capacitor/supercap cant realy remember anymore but his fix actualy worked...but then again thats after all the hassle...so yeah,k weld or those amazon bfirc portable welder would do you good even with thick nickels
@@charliemike5699 Maybe you're talking about the guy who used a wall wart to power his welder externally? He said they used to fry on him because when the voltage sag, the MOSFETs stay open and just explode? I tried this method, it doesn't change much because my pack is in a good shape, I will say though is that you can use whatever voltage you want (to weld) if you power it with external 12v. Then you only connect the negative to the welder, the external 12v just give open and closes the fets, need to be pay attention to the temperatures tho..
What is the principle of welding batteries? I understand the basics and that the welding spot should have the highest temperature for the shortest time. We have a spotter with a bunch of settings: first welding, second and third, where the second welding is the main welding and the third is hardening. There are also peripheral settings such as pause between pulses, current rise and fall times. So let's get down to business: the first and last welds should not have as high a current as the second. The first weld prepares the nickel strip for welding, the second welds it directly, and the third releases the strip. We have two main problems that I still can't figure out: 1. Why do the electrodes "stick" to the workpiece? According to my observations, this is due to the cross-sectional area of the electrode tip in contact with the nickel tape. On the one hand, a smaller contact area creates better welding, but the electrodes stick 👉👈 On the other hand, a larger area cooks worse. By increasing the current, the workpiece overheated too much and still nothing happened) 2. One electrode cooks and the other does not. In the case of DC welding, this is understandable. The "positive" electrode, where the current enters the battery substrate, welds better than the "negative" electrode, where the current leaves the battery. However, with AC welding, this is illogical for me, because the current flows back and forth across the workpiece. Maybe someone has a few gigabytes of information about welding batteries?) I want to absorb all the text from anyone that is related to welding batteries
Can I spot weld a cable to a small thermostat (255 C) in steam iron or steam generator using a car battery or other power source? Do you think is it will work?
Looks too weak to fuse together a good connection. I was at least expecting a bit of spark when voltage applied. I want to see how to make a battery spot welder that be more powerful, takes only two hits to make good connect.
This is generally referred to as a "Sunday handyman". I think you should give up this kind of hobby because it can be dangerous. Or make people aware in your videos of what not to do. Sewing or knitting seems more reasonable to me.
That battery can't provide the momentary high-amp load and you would be better off using an automotive battery with at least 200amp CCA rating. Your connections are week. These DIY PCB boards just act as a timer and current limiter and cannot bring more amps than the source. You need a good power source to get a good and strong welds.
Could you use 18v batter from a power tool?
@@SatansBaby1 yes
@@SatansBaby1 no 12v/14v for the board but higher amp source (car battery )
I was view videos, alternatif for using battery 12v . Using 2.7 500f can help the battery, best alternatif buying bifrc..no capasitor and weak. Battery
@@SatansBaby1 Usually a battery with high C rating will do the job, like car batteries
Hi,can i use 12v cordless drill battery (3x18650-20c) to operate it?
Two capacitors of the same type How will it be installed?
Can use somehow in manual mode, without auto start when pins touch surface?
mine is too..to weak...i tried also with 100Amps and 800Ca battery but it makes partks ar battery terminal and not to the spot pen! cheap and no good at all
តើរកទិញនៅអែណា? ថ្លៃប៉ុន្មាន? អរគុណ
what are the modes ?
Can you explain each settings. Also can we use 12v ac adaptor ???
Typical AC adapter only supplies low amperages.
I have the same spot welder as you, but it doesn't work : there is always a tension between the electrodes, but no current.
It is burned
What does tension between electrodes mean ??
I am using bike battery. It’s burning the nickel strip. What could be the issue. Thank
can you testing it with the any power supply?
Use with a battery above 40A for good welding results, it's better to use a 100A car battery
Don’t buy something you have to complete it by soldering a capacitor or what ever. The circuit board are always faulty. Why didn’t the producer leave the easiest last bit of work before selling it?
Because they soldered the smd components and through hole componets take time to solder that why they leave it for us
Will it work with bike battery ?
Or a 12 v laptop charger ??
I need to purchase but bit confused
No it need 35amp above battery
It will work with bike battery, during self start it provides up to 60-80amp momenerily.
Assalamualaikum my circuit no work with bike battery or other battery pls guide me
Mera circuit blink nhi krraha
How much current it deliver? Is it really work?
@@TechRecord Thanks
can i use power supply unit of 12 v and (dnt know how many amps) (if anyne would tell me then i will buy a psu) instead of the batteries ?
no , battery much higher amps
thanks for explaining
Can I use 68Ah car battery ?
Thats actualy the best battery to use for that...
@@charliemike5699 I'm starting to think that this board is basically trash, I've changed all wires from 12 to 8AWG and using I'm using a 10A 50c 3 cell Li-Po that during short pulses can supply current in the thousands, and still, this board has very short pulse time for a 0.20 nickel strip, I think the way to go is investing in Kweld, the best battery powered welder I've seen, not cheap at all though.
@@Eden_M oh yeah,kweld products are good...this cheapo weld are actualy for beginners who doesnt make some high performance packs...I remember watching someone here on you who modified this thing coz his welder burned a mosfett,I recalled he fixed whats broken and I think he added a capacitor/supercap cant realy remember anymore but his fix actualy worked...but then again thats after all the hassle...so yeah,k weld or those amazon bfirc portable welder would do you good even with thick nickels
@@charliemike5699 Maybe you're talking about the guy who used a wall wart to power his welder externally? He said they used to fry on him because when the voltage sag, the MOSFETs stay open and just explode? I tried this method, it doesn't change much because my pack is in a good shape, I will say though is that you can use whatever voltage you want (to weld) if you power it with external 12v.
Then you only connect the negative to the welder, the external 12v just give open and closes the fets, need to be pay attention to the temperatures tho..
What is the principle of welding batteries? I understand the basics and that the welding spot should have the highest temperature for the shortest time. We have a spotter with a bunch of settings: first welding, second and third, where the second welding is the main welding and the third is hardening. There are also peripheral settings such as pause between pulses, current rise and fall times.
So let's get down to business: the first and last welds should not have as high a current as the second. The first weld prepares the nickel strip for welding, the second welds it directly, and the third releases the strip.
We have two main problems that I still can't figure out:
1. Why do the electrodes "stick" to the workpiece? According to my observations, this is due to the cross-sectional area of the electrode tip in contact with the nickel tape. On the one hand, a smaller contact area creates better welding, but the electrodes stick 👉👈 On the other hand, a larger area cooks worse. By increasing the current, the workpiece overheated too much and still nothing happened)
2. One electrode cooks and the other does not. In the case of DC welding, this is understandable. The "positive" electrode, where the current enters the battery substrate, welds better than the "negative" electrode, where the current leaves the battery. However, with AC welding, this is illogical for me, because the current flows back and forth across the workpiece.
Maybe someone has a few gigabytes of information about welding batteries?) I want to absorb all the text from anyone that is related to welding batteries
230 Ah inverter battery लगासकते है क्या सर ?
❤❤❤
Please use a 45Ah car battery and then test it :). In 9Ah battery from ups the spots is too weak.
My welder beeps but no welds 🤣
Yoo bro, I am having the same problem
@@vijaybala185 I had too low voltage supply battery 😅😂
@@JoonaParhankangas Voltage doesn't matter Current is important (12v minimum) more current needed, like atleast 50 Amps, and it starts to work
Hi. I have the same and need your help. Can you tell me what is the T1 component as mine burned. I will be thankful. Thank you.
Can i use 4S lipo 5200 mah battery for input?
Not Sufficient
Need atleast 50 Amps
If you have high c rating like 35c in this battery, it will definetely work.
can it be used by car battery 12 volt 50 amp
good video
✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩
Bagus bangettttttttttttttttt.....
Good good
ٹرانسفارمر والا سپورٹ ولٹر Ac پر اپریٹ ہوتا ہے کیا
Does anyone have the circuit diagram for this?
no bro
try doing it with a car battery
Saan mabili dc spotwelding
Shopee pre meron. Same model na yan around 600 pesos.
nakabili ako neto 2 times puro palpak butas ang nikel strip. wlang stoper na tunog pag pjnagdikit always faulty ang board nyan
Where to buy....
aliexpress
Can I spot weld a cable to a small thermostat (255 C) in steam iron or steam generator using a car battery or other power source? Do you think is it will work?
Computer power supply use??
no
Add mini fan pcb 😭
Looks too weak to fuse together a good connection. I was at least expecting a bit of spark when voltage applied.
I want to see how to make a battery spot welder that be more powerful, takes only two hits to make good connect.
because he's using a 9ah battery that's too weak for the spot welder. the minimum requirement is 20amps
👎 as no source or details provided.
well that looks like cheap crap
Give a buying link Bro.....
try ebay fool
This is generally referred to as a "Sunday handyman". I think you should give up this kind of hobby because it can be dangerous. Or make people aware in your videos of what not to do. Sewing or knitting seems more reasonable to me.
Where is the problem of a person showing how a product you can buy online working?