Dyson Stick Vacuum Problems? Battery or Dirty Filter, Do You Need Help!

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ต.ค. 2022
  • Dyson vacuum no working? Try this...
    After a couple years of heavy use, my Dyson V8 started giving me problems. This video discusses what to do if your Dyson vacuum is not running while showing a full battery charge. Don't run out and spend a bunch of money on a new battery before you try this.
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 30

  • @TheThegregorys2008
    @TheThegregorys2008 ปีที่แล้ว

    Thank you. I really needed to see a good breakdown of this vacuum. I have been experiencing the start/stop and it has been annoying.

  • @pegatheetoo1437
    @pegatheetoo1437 4 หลายเดือนก่อน +2

    I have given my Dyson a thorough cleaning AND bought a new battery ... still not working. I do have a sledgehammer though ... 😂

  • @mcorsen
    @mcorsen ปีที่แล้ว +1

    Very helpful. Thank you!

  • @deev4332
    @deev4332 ปีที่แล้ว

    I can’t wait to clean mine. Thank you

  • @manuelm4747
    @manuelm4747 8 หลายเดือนก่อน

    Thank you so much it helps a lot 😊

  • @lisabrigman3220
    @lisabrigman3220 ปีที่แล้ว +3

    They need recall on those vacuums for the price it is, I done everything still not working all day job taking it apart start with all cleaning to taking it a part buy batteries n warranties over .....My mother got ripped off spending to much money I buy a $20.00 vac and been working 20 years yes belt got change once in a while filter still runs like a charm

  • @LokiStyle34
    @LokiStyle34 ปีที่แล้ว +3

    Very helpful thank you. I was about to trash mine and get a new one.

    • @mikejones5364
      @mikejones5364 ปีที่แล้ว

      Same here, I even bought a battery and changed it, then I looked in the box they sent new filters, that fixed it finally

  • @ihrescue
    @ihrescue ปีที่แล้ว +1

    Good video. Washed the filter for the first time after having the problems of intermittent running. This first time I didn't realize that the cone builds up debris inside so I learned that submersing it in water wasn't the best approach. I did learn also that the top cap is designed to come off so next time I will take the cap off and first vacuum out the cone and then blow it out with compressed air before I wash it. I am thinking I had the vacuum for three plus years so there was quite a bit of debris in the cone before I started having a problem. I need to make sure I do better maintenance, vacuuming the vacuum. Thanks

  • @stevec69
    @stevec69 6 หลายเดือนก่อน

    Thank You so much Dude! Im one of those whos not so quick to suspect its battery and make sure i do the due diligence
    this vid was right up my alley
    thank you for this needed content

  • @ashleyderozario9811
    @ashleyderozario9811 10 หลายเดือนก่อน +1

    did you know you can actually remove the filter bag from the top cover? the top cover is connected to a plastic filler that gives the filter bag shape. Once you remove the top cover, you can see the crap/dirt stuck at the bottom of the plastic filler. you can remove such dirt from it. The filter bag you can clean and squeeze the dirt out from it with water. You will know the bag is clean when you can see the bottom of the bag (if dirt is surrounding the inner bag, it stops the light from penetrating it hence you won't be able to see the bottom of the bag)

  • @monsooniphone
    @monsooniphone ปีที่แล้ว

    Thank You 🎃 I needed to know how to take my one apart. Thank You 🎃 for the video.

  • @rolandarnold353
    @rolandarnold353 10 หลายเดือนก่อน

    washed filter is drying now hope that fixes it thanks

  • @dlazard1
    @dlazard1 7 หลายเดือนก่อน

    Hi, I bought two new filters and charge it and it has three strong blue lines, it runs for about 10 seconds and down to one blue line? What do you think, battery?

  • @RogueBrit
    @RogueBrit ปีที่แล้ว

    Wash them once a month in cold water it's a must

  • @sabiya2
    @sabiya2 3 หลายเดือนก่อน

    I’ve cleaned all filters, cleaned everything and put back together still turns on and then off again after 10-15 seconds.

  • @TISCIONE1
    @TISCIONE1 6 หลายเดือนก่อน

    I cleaned my V8 filter after watching video and it still pulsates. I replaced the battery, cleaned the filters and still pulsates but when I take the filter on top out it works normal!!!!!! Help, should I replace the filter

  • @David-fj5lz
    @David-fj5lz ปีที่แล้ว

    Better to move the new sock from the replacement onto the old plastic case so you can keep that pull tab

    • @David-fj5lz
      @David-fj5lz ปีที่แล้ว

      If find a baby wipe works better

    • @David-fj5lz
      @David-fj5lz ปีที่แล้ว

      I spray those contact with electrical cleaner to prevent corrosion/dirt build up

  • @fraserreal8496
    @fraserreal8496 ปีที่แล้ว

    thank you

  • @yvonneost12
    @yvonneost12 ปีที่แล้ว

    tHE FILTER YOU TOOK OUT OF THE TOP OF THE VAC - if you get a blunt knife and pop those 3 slits out around the base you can remove the material part of the filter from the plastic cone underneath " then wash it " it is shocking what is under there actually .BUT it must be completely dry before using it again ( eg: out in the sun for 24 hours or similar )

  • @taleensarmad6093
    @taleensarmad6093 ปีที่แล้ว

    The heat torque of my dyson not work even i clean it 😢

  • @norapech9526
    @norapech9526 ปีที่แล้ว +1

    If a product needs this much care...it's not worth the cost. I had mine a short time and it started the pulsing thing. I never recommend it to anyone.

  • @brianswanson4921
    @brianswanson4921 7 หลายเดือนก่อน

    Just bought 1 new from argos ..at mo 100% rubbish ..its going back

  • @CanBrownies
    @CanBrownies 6 หลายเดือนก่อน +1

    I’m so sick of this vacuum

  • @louisavanyzendoorn9742
    @louisavanyzendoorn9742 ปีที่แล้ว +2

    Dyson is a nightmare. Bad investment

    • @djonlinemoscow
      @djonlinemoscow ปีที่แล้ว

      Yes. Like iPhone. But it make life better, not for long :)