How to Make a Beautiful Resin Tray From a mold
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2020
- Making a resin tray can be extremely pleasurable and they make great gifts. This easy to follow tutorial shows how to make a beautiful resin tray from a mold. The resin mold is inexpensive and very versatile, you can let your imagination run wild with this mold.
Be sure to check this video out next on how to use mica powder to create feathering: • Easy Resin Feathering ...
Channel membership is now available to everyone. Membership comes with a lot of additional perks and support for anyone at any level of their resin journey to benefit from including a VIP Facebook group. Please JOIN this channel by clicking the JOIN button next to the subscribe button to get access to these perks:
/ @stevemcdonaldartsandc...
OR
If you would like to buy me a coffee, or make a much-welcomed donation towards the cost of materials as a thank you, you can through this link 😍 www.paypal.com/paypalme/SMcDo...
Steve 😍
LINKS FOR MATERIALS USED FOR BOTH THE (USA👍) AND (UK✊) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Silicone Tray Mold: amzn.to/3m0uGR5
(USA👍) Resin: jdiction.online/?ref=w6l74mbw04
(USA👍) Opaque Resin Pigment: amzn.to/2R4qDoA
(USA👍) Silicone Jug: amzn.to/323LiPL
(USA👍) Silicone Mat: amzn.to/326fUAn
(USA👍) Silicone Stir sticks: amzn.to/3h7pc3l
(USA👍) Fume Extractor: amzn.to/3bAmzWp
LINKS FOR UK (UK✊ Only)
(UK✊) Silicone Tray Mold: amzn.to/323Et0K
(UK✊) Resin: amzn.to/3bBIzA5
(UK✊) Opaque Resin Pigment: amzn.to/3bBjGF2
(UK✊) Silicone Jug: amzn.to/3i71vct
(UK✊) Silicone Mat: amzn.to/3i7frDf
(UK✊) Silicone Stir sticks: amzn.to/3h8BwjN
(UK✊) Fume Extractor: amzn.to/35hCN5F
Important notice:
Although I often talk about health and safety in my videos, please make sure you do your own research and take the relevant precautions to ensure that you are protecting your health. I am not responsible for anyone using resin and not taking the correct safety precautions. Resin is a chemical and as such should be treated with respect and at all times the manufacturers safety advice taken.
As an amazon associate, I earn from qualifying purchases. - แนวปฏิบัติและการใช้ชีวิต
![แฉ [2/4] 11 ก.ค. 67 ‘ขวัญ อุษามณี’ เผยความจริง 16 ปีที่แล้วเกิดอะไรขึ้น? | GMM25](http://i.ytimg.com/vi/K4pXnUiObbk/mqdefault.jpg)
That turned out really nice. I agree, the black and white is very elegant. I can’t wait to see your Christmas ones.
The back of the tray is quite pretty too! I've got a couple of big projects coming up, as our weather I'd finally cooling. I'm so happy I found your channel!
Love how this turned out! Who knew the resin would move like that!
Really nice! If heat resistant resin is used, one could use the handles as feet so the tray can be used, raised, for hot dishes on the table. Love the black and white.
Thank you for the vid! I'm new at this resin thing and my first project is this tray I got obsessed with lol
Thanks for the vid. Straight to the point, I loved it!
I have ordered one of the moulds, can’t wait for it to arrive! The black & white looks awesome 😎
Beautiful tray and much thanks for showing how to attach the handles.
Wow. The pattern is AWESOME! excellent video.
I absolutely love this!!! ❤️🥰♥️
Wow. Loved how the resin moved. It looks amazing.
Steve - that looks absolutely beautiful and of course, the mold had to be ordered! As long as I am a member or four channel, I will never have any money lol... but, I LOVE it, and you you g man. you are an amazing creator and influencer on TH-cam and the way you deliver your tutorials is inspiring, and done in such a way that a novice, such as myself can create beautiful things - thank you so much
Came out nice!! If you put a piece of painters tape across the holes of the handles. Then poke holes in the tape. Then place the tape with holes in desired location of where you want the handles. Perfect hole alignment
Oooh, it looks great Steve. Very elegant x
That is so deep love how it turned out Steve💎have a Wonderful DAY
I LOVE it!!!💚 Thank you!!
Wow that's pretty and shinny can see your reflection!
This is gorgeous I was looking juat to attach the handles but what an awesome tray as this is a gift for a male. I hope mine turns out like yours. Thank you ❤
Gorgeous Steve, there's nothing like classic black and white :)
Love the results Steve .I love making trays
You are very easy to understand. I learn a lot from you!
I just loved this video, I'm very impressed with the two simple colors together Steve, good job, very striking!! Please post a picture of what the back looks like, I'm very interested 😊
I love it. Thank you
Thanks, Steve, from a new member. Love you!
Nice little tray.
Beautiful tray
Gorgeous!!!
Beautiful 😍
ooooH I love these new moulds
@@SteveMcDonaldArtsandCrafts I will have t try
Looks awesome! I've been thinking about making one for a long time but was not sure what to do with the drilling.
Since I've found your videos, I can't help but watch them all 😊
Me too!!
thats very classy. That would make a lovely wedding gift for someone. I would like that. I think I may have to make some coasters like that until I get a tray mold. I don't care for the odd edges. I want one that is straight. But with that it works well. Nice going. Lovely video.
Beautiful 💯
Love the pattern. Must make one for my butler to deliver my post to me on lol
Awesome job
Love it
Have you thought about making a mold from your handles? That way you don’t have to buy them and you can customize them! 😊😊
i use the mold to make my handles and iam now not limited to color can do any color and much cheaper then buying
How to make handles from the mould
And how you paste it with the tray ?
Pretty
Ty
Very nice
👍 NICE.
Love the tray. Have you seen the tray handle molds? You can customize your own handles. Pick the colors you want your tray & handles. Make the handles first. The next day, design your tray & add the handles into the resin. 24 hours later, your tray is done. Buying handles from the store adds up over time.
jiggly puff I wish there was a video. I learned through trial & error. For example, you wanna make a blue & white tray with some glitter. Make up some resin. Make half of it blue with glitter & the other half white with glitter. Pour the resin into the handle mold. You can pour the resin half & half..layer it or make one handle blue & the other white. After 24 hours, your handles is done. It’s very easy & it doesn’t take much resin
Badasss
SO HAPPY I FOUND THIS VIDEO! can i ask how many ML of resin you used for this tray?
Thanks for your informative video. Did you use a mold release? I'm never sure when one is needed.
Do you find it that the powder mix works differently than the already made liquid bottles?
Also can you tell me what size bit you used on your drill and if the screws were included with the tray? Keep up the good work!!
U guys....if you have a silicone mat, you can make this freeform mold by adding a line of silicone on top in the desired tray shape. Or coasters too.
Hey great video loved the Tray! I just wanted to let you know that usually when you scrape the bottom of the resin and put it on the peice, it pulls out all the unmixed resin and it might be a little sticky in the end. Anyways great job!
It's amazing, can you tell me if it's just decoration or for using? Like putting hot plates or cups on it?
Thank you great video.
Can you please tell me about how much resin it took for your tray. Thank you in advance. Hugs
Love that you show the wait and screw method. So many pour and put them in to cure. It's the Wrong Side in my opinion. What do u think the mold is for, to give a nice mounded and shiny top and edge. The back isn't what I like to mount into. My opinion, but thanks, Steve!
Deu preciso comprar este material 'aqui nos não temos.Por favor informa o site 'obrigada.
Parabéns
If you could link where we can buy extra handles from that would be helpful
Have you had any complaints or issues that when the tray gets warm (or in the heat for a while) it becomes flexible again & bends?
Also have you used resin to put handles on
Can i put the handles into it before forming? So I don’t need to do holes with machine
Do you wash pipettes after acrylic or are they single use?
Really nice. How much resin did you use for this tray?
Amazing I just came across your channel a few days ago and love your work, may I ask did you get the extractor fan so you wouldn’t have to use a respirator or was there another reason if you don’t mind me asking
Steve McDonald Arts and Crafts thank you I will invest in one when I can when I’m able get my shed, looking forward to seeing more of your work 😊
Beautiful tray. How do you know how much resin for the tray?
I ordered this tray and it came folded. Now there is a big crease in the middle. Any advice for how I can smooth it out so I can actually use it?
Steve saw your video with white and black tray. Did you do any kind of drawing through to make the desIgn or did you not touch it after the white was scribbled on?
Is there a way to make edges on a mold like this instead of having to buy a whole new mold for it? I am just looking for a way to make some kind of edge around it so nothing will just roll off of it. If you have any tips & tricks I could use it would be greatly appreciated. Thank you in advance!!! I just can't figure out how to do it/ LOL
How much of resin and epoxy are you using for this tray? I have the exact same one.
Can you make a black and copper one
What happens if you put the handles in the resin as it dries? Will they not hold ?
Nice! thanks for the tutorial. Does the smell not bother your nose?
Also, these screws are smaller than big box handles to go through wood drawers. I have to cut those constantly.
I like the way it turned out. I wonder if I can do that without a drill? 👍
Thank you 😊
But how to tighten screws into handles if they're embedded? On 2-point handles like these? Unlless I'm having a fog brain issue?A drawer pull type with single screw, easy peasy.
Wow 😏 i have the same mold. But i have a question please. How much 1:1 resine do i need? You know that you can add the handle before? 😅✌️ Greetings from France
If I wanted to add dried flowers at what point should I add them in?
Maybe you can solve a problem for me. When I made my tray I Poured half full with my colored resin. Let that set. And did a clear pour on top. When that set I got a sticky butterfly shaped area. I’ve done this twice and the same thing happened. Any idea why this occurred? Appreciate your input
what have you used to pipe t the white
Hi
Can I ask How much resin you used?
Thanks
How did you know how much resin to use to fill tray without over/under filling??
It's a fantastic design & I love the shape.
I wondered if you could help me. Is there any way to make dull moulds shiny? And if a shiny mould has a dull patch can you fix it or is it ruined?
Any help will be great. Thanks
@@SteveMcDonaldArtsandCrafts Thanks, I will give it a try
With what did you pour the white color
i can’t figure out the measurements to get it even on both side can you tell me how much expory to use thanks
Which ratio of resin did you use?
how do you clean the pippets after using them?
Cure
In which we get this resin geode
Never tried this (although I've had the mold for ages...lol) I just noticed a lot of bubbles after it was cured. Was that intentional? Also what were the quantities of resin? (Cos I have the very same mold) xxx
How do you keep the nail heads from scratching surface.
What did you do to make it level. I couldn’t understand
Hi, question ⁉️ why couldn't you set the handles into the wet resin? And how do you get the edges to be smooth and not sharp?
How much epoxy was needed for doing the tray?
Are handles required?
Did you ever put your handles into the resin so your don’t have to drill holes???
How did you know how much resin needed to be added?
Beautiful Steve, where did you get the handles please?
Home depot has a good selection
Thank you Steve, I’m in the uk so I’ll have a look.
Where can I buy your exact tray mold?
Hello! I’ve also bought this mould, how much resin did you use to fill it? I’m not sure how to find out as it’s an irregular shape? Thank you!
@@SteveMcDonaldArtsandCrafts I will try that, thank you!
how much resin do u need for a tray like this
how much resin consume tray mold ??
How much resin do you mixed?
Is that the top or the bottom?! With the white?!
Can you put the handles in the resin directly and let them set instead of drilling?
You can but the grip won't be as tight and secure
Can I put a flower in this? Do I have to press it and dry it first?
Thank you so much@@SteveMcDonaldArtsandCrafts
As a new resin follower, why doesn’t anyone tell us how much resin to mix for the projects?
Try measure it by puttin water in the mold, throw it in a measure cup and et voila 😊