I feek like i would be deoaooing the seat in and out depending on race days. Will you be doing shoulder harnesses. I feel like after sonk aybautocross and race days andbtolling back and forth in the seat i eabt to do that.
My big hang-up was the seatbelt plug - I assumed it needed to be connected to prevent the "Hey, buckle up!" chime. It looks like you're just leaving it disconnected, though?
After a month, what are your thoughts? I’m in the Austin area too. Is it a cloth material? Their site just says “OEM Style Materials”. Just starting my search so I’m sure it’s out there already.
So I’ll say the foam is pretty hard but I imagine more seat time will make it break in more. I did take it on a few 3 hour trips and no issues. The bolstering around the shoulder is much improved over stock. The thigh bolstering is actually pretty similar to stock,just with harder foam. Getting in and out is easy, no weird car yoga like I used to do getting in and out of the 911 with fixed back buckets.
I feek like i would be deoaooing the seat in and out depending on race days. Will you be doing shoulder harnesses. I feel like after sonk aybautocross and race days andbtolling back and forth in the seat i eabt to do that.
So, do the airbags all fully work after adding the resistor?
Yes, only difference is the one built into the drivers seat is no longer there. The resistor just tricks the car into thinking it still is.
My big hang-up was the seatbelt plug - I assumed it needed to be connected to prevent the "Hey, buckle up!" chime. It looks like you're just leaving it disconnected, though?
I plugged it back in
@@randomquickness To what? Did you pull the harness off of your stock seat?
Yep, reused buckle and harness
@@randomquickness Appreciate the reply. I have a power seat so it looks like there's an extra harness I have to track down.
After a month, what are your thoughts? I’m in the Austin area too. Is it a cloth material? Their site just says “OEM Style Materials”. Just starting my search so I’m sure it’s out there already.
It’s cloth but feels different than oem. You’re welcome to swing by and sit in it.
@@randomquickness that would be great. I’m out of town for work the next few weeks but when I get back to town I’ll be contact.
How's the 1 month review so far with this seat? Comfort and dislikes?
So I’ll say the foam is pretty hard but I imagine more seat time will make it break in more. I did take it on a few 3 hour trips and no issues. The bolstering around the shoulder is much improved over stock. The thigh bolstering is actually pretty similar to stock,just with harder foam. Getting in and out is easy, no weird car yoga like I used to do getting in and out of the 911 with fixed back buckets.
Is it possible to keep the heated seats option? Do the make these seats with that transfer option?
I’m sure it’s possible with other seats. To make these seats heated would probBly be more hassle than just buying an aftermarket heated seat.
Do you any issues with heated seats lights or codes coming up?
Nope, disconnected the battery during install and used the resistor on the airbag connector (yellow connector under the seat)
does the sparco seat make you sit lower then the oem seat?
No, it sits very similar
Where did u get the resistors?
Amazon. I have 99 spares lol. If you’re local to Austin, come grab one 👍
What Ohm and wattage are the resistors?
a.co/d/fFDhfiD