Good comments about owning a Pro 1000. I have owned one for about 1 1/2 years. I got it because I do print larger size prints....usually 16"x20" or 16"x24" of my astronomy photos which I sell. I also print any smaller sizes such as 8"x10" for my normal photo business.I also print small 4x6" prints for family photos such as vacations. I previously owned two Epson pro printers that could also print that size. Both had lots of problems with spitting of ink and finally both died.... that is why I went with the Canon which to date has been problem free. Those who think the printer uses a lot of ink don't realize that the ink is not used directly from the cartridges. Instead it is pumped into feeder tubes so a new print will draw ink into the tubes so it seems after loading the tubes you have used about 40% of the ink.... that isn't correct.... it is in the machine waiting to be used. The next set of inks you get will show a more realistic remaining ink in the printers display. The most important thing is you need to print every day or two.... doesn't have to be a big print.... a tiny print say 4"x6"is all it takes. Some even print a tiny 1" block but I like the idea of using all the nozzles to keep them cleanr. I use QPrint which is an excellent app to print from with some features beyond the built in one in Adobe Photo Shop. The neat part is you can setup an automatic print so it will print a very small print each day at a specific time using all the nozzles. The Qprint has that ability built in. The other way to reduce ink usage is DO NOT turn the printer off. If you do each time you start it up it will go through a purge cycle and waste ink. In my case I even got an inexpensive batter UPS that prevents the printer from turning off in the event of a power outage. You most likely won't be able to print but at least the printer will stay on as you wait for the power to come back on. Many of these tips and tricks I learned from Jose Rodriguez who has some wonderful videos on TH-cam. You implied this.... but I found it cheaper to buy the paper in rolls and than you can cut them to the exact sizes you need. I am a professional photographer and astronomer so I tend to print standard sizes as well as odd sized so being ablel to get the most efficient useage of my paper is an advantage. I recommend is taking those cut sheets and placing under a board with weight on it to flatten the sheets so they feed smoothly. I found that Epson doesn't have replaceable print heads whereas Canon Pro 1000 does. I haven't needed mine replaced but that is a nice advantage so you don't end up with a doorstop as my two previous Epsons. Finally MAKE sure you have updated the firmware of your Canon to the latest. The newer firmware has more efficient use of ink and now allows a maximum print size of 17"x48" so real panos are now possible. There are companies that sell aftermarket ink cartridges and also there is a couple of companies that sell what you need to use their cheaper inks and refill you old cartridges. I am not a proponent of that but there are any that do refill or use aftermarket inks. I have found on other printers you do save money but consistency or print life span may degrade. Some colors are very hard to match such as Canon Red and Purple so that may be problematic. Finally while the Canon Pro 1000 is a fantastic printer people need to be realistic about how much they will use it and what print sizes. For hobbiests who only print a few prints it is not a smart choice. You would be better with an outside processing company or get a cheaper smaller max print size printer and use a print service for the few large prints. The Canon has a utility that you an use to tell you exactly how much each print costs. That is a good tool to use to keep your printing costs in control.
This is what I was looking for. I had heard that Canon upgraded the firmware to allow the printer to produce larger than 17X22. I bought a P800 at about the same time that the Pro 1000 came out for one reason; at the time, the Pro 1000 was limited to 17X22, but the P800 could not only print larger, it had the roll option. I recently sold my P800, but will be getting another printer. If my budget allows, it'll be the new 24" Canon printer, but if my budget says no, then I'll buy a Pro 1000.
You forgot to mention that to replace the printhead is $726... I have been using Canon PRO printers for 15 years. Currently using a PRO 2000 24" but looking at getting a PRO 1000 for printing smaller cut sheet prints (The PRO 2000 does not have a paper tray for handling cut sheets) I love the results and the PRO 1000 uses the same inks, print head and processor as the PRO 2000...
Hi Mallory. I sell prints and use an Epson P800. I bought it instead of the Pro1000 because at the time, the 1000 would only print 17x22 as you mentioned. The P800 had a roll paper option which swayed me to the Epson. Since then, Canon updated the firmware to allow the 1000 to print longer. One thing you might mention at some point is that the bigger the ink cartridge is, the less ink costs per milliliter. The ink cartridge for the old Pro 100 was about $1.30 per ml. My P800 with an 80ml cartridge is about $.70 per ml. Jump to the 160ml and beyond, the price per ml drops further.
That was very interesting and helpful. You have a calm demeanour and your videos are very easy to watch and I find that I absorb the messages in a lasting and simple way. I only produce imagery for my own personal use and find photography a valuable kind of therapy for the good of my mental health. But I admit that just viewing the results on a computer screen often feels somewhat pointless and I would probably benefit from displaying printed pictures from time to time. This particular printer certainly isn't aimed at the likes of me, but I now know more about what I could potentially get for my money and if I keep looking at lesser Canon models I ought to be able find something suitable. Your images are beautiful and I can see that the way you organise yourself maximises your many obvious talents. Thank you for sharing all this with us.
What kind words, Michael! I'm so glad you found this video helpful in your purchase journey. I can't recommend printing your work enough! Even if you send them to a local drug store or store for 4x6 ... there is something so magical in completing the cycle of - starting with an idea, using the camera to capture an image, then holding that image in your hand later. Happy shooting and thank you again for the kind words and tuning in :)
Thank you very much Mallory for your video, I am an amateur landscape photographer but when I think about sending out to make a print I always cringe at the cost of big prints... I was hesitant to buy the pro1000 until now but the more I see videos like yours I am more and more convinced that I need to print my own work... Thank you!!!!
Hi Mallory, great that you mentioned the ink going into the maintenance cartridge. I print a moderate frequency, but I still have more ink going into the maintenance cartridge than onto paper! I previously had an Epson P900, which used much, much less ink. But its paper feed mechanism was terribly unreliable, so I got the Pro-1000, which has proven very reliable. Even with the ink the Pro-1000 "wastes", ink is still a relatively small cost of a big print (including paper and mounting, and really you should camera and lenses and time taken) and is tiny compared to the price the print is sold for.
Thanks for your video. It's IMPORTANT to use the Canon Accounting Management (CAM) software, made for these types/level of printers. Using the Canon Accounting management software, we can obtain more exact printing costs because it takes readings in real time from the printer based on parameters entered for the cost of paper and ink, which can be entered manually. It's pretty simple, except initial setup, not so much, and Canon doesn't offer proper support for setting up the CAM software. I'm happy to help if anyone needs! The CAM software is the BEST way to know what is being spent for ANY given photo. I have started an Iris Photography business, aside from my headshot and event photography. Iris as in one's eye. Pretty iris photos with a black background, mostly using luster paper, and mostly Black ink, Gray and some minor other color inks and Chrome Optimizer. For example, an 8 x10 inch print using Canon Pro Luster paper on 8.5 x 11 inch paper runs on average, $1.50 for ink and paper. Average cost using Pro Luster A3+ paper and printing an 11 x 14 inch photo (on A3+ paper) is $2.20 - $3.10 each (paper & ink). Again, this is Canon OEM ink and Canon paper. I have decided after long hours of research to now start using Precision Color Inks and the Precision Color Ink Warning System. Inks are on average, HALF the cost of Canon OEM! I am not an affiliate nor do I get any kick back from this company but the guy who runs/owns the company (Mike) is SUPER helpful with understanding how his warning system operates and his ink prices are a fraction of the Canon OEM inks. www.precisioncolors.com/ ALSO, QImage printing software is one of the best ways to print since it allows a higher level of control - PLUS - QImage allows a schedule to do a nozzle check so we're not wasting more ink for head cleanings. It can be set to run a full or half page nozzle check at any time of the day that works. Canon's Professional Print & Layout software is good but QImage is bit more straight forward. Sincerely! Richard
I also had the Canon pro-1000 and bought a 17 inches roll Canon paper and cut it to size myself that works perfectly and saves a lot of money. Now have the Canon pro-2100 and it is very nice that you can put a roll in it. It's a pity that you don't have a roller system on the pro-1000. I think it is possible an equal Epson. Nice video...
Great tip! I would have never thought about that!!! Maybe I could rig a system near the printer to hold a roll....... but then how would I do a clean cut.... all things to think about!!! Thanks for watching, Fred!
Yep, all the Epson photo printers can use roll paper. The Epson SureColor P906 (their smallest pro printer) can print up to 18 metres in length, 17 inches wide.
What a great idea for a video. Haven’t seen anything like this from any other contributors. Perfect information for a dedicated amateur considering the expensive step into printing at home. Great quality production too. Really glad I found your channel!
People get into/have videos on cost. I think it is Red River Papers have info on print cost. I also believe the Pro 1000 has some kind of cost/accounting software.
Thank you for video and calculating cost. I don't print often, so it's not worth buying this printer. But I couldn't know without your video. Thank you very much. Greetings from the Czech Republic, Milan
Great video, that for sharing. I love my pro-1000 but can't seem to get it to print fully on 4 x 6 or 13 x 19 paper, the printer wants to add a margin around it and can't get it to bypass it. Any suggestions? Thx
Excellent video, but not clear to me is how you calculated the ink/print costs. Did you use an app to measure that? Or if not, the printer comes with ink cartridges that may only be filled partially and the purpose if that ink is to fill the lines between the ink cartridge and the print head/nozzles. There's some "bonus" in there but the cartridges will not be empty all at the same time, so making penny precise calculations, is difficult from this. Anyhow, printing with an A2 printer too, my conclusion is the same. And we can choose whatever (top) paper quality we want, while using top quality inks. With the printing companies it is not always transparent that you get museum quality prints (or a notch less good "archival" quality, that still may be better than the print company's). The maintenance cartridge is a fact of life and probably making one print per week already is enough to prevent the printer from ever going into maintenance mode to dump stale ink or prevent clogging of the nozzle. Personally, I invested on top of the printer, inks, and paper in a calibration device for my monitor and for prints, too. That and making test prints adds to the costs and hassle. But with the calibration, testing is reduced to a minimum. No, I cannot earn back the material costs of calibration but not having to make as many test prints (time) is worth it.
I now live about 3½ hours away from Austin and San Antonio, out in West Texas. I bought my Sony A7R2, used, from Precision Camera in Austin, back when I lived near their store. Being out in West Texas is definitely taking some getting used too. But I'm starting to think of some unique photo opportunities out here.
thank you for your perspective on the printer. Are you going to add more video's on this printer. such as set up and down loading of ICC files along with monitor and printer calibrations?
Great review spot on! I have had this printer for about 2 years now and I can say for sure that you need to use this daily even if for a small print to keep it from going into a maintenance cycle. In the 2 years I have changed the maintenance cartridge twice and have about 1/4 full on the third. I have gone through 1 1/2 complete sets of ink and most of that went into the cartridges. So if you are thinking about this printer make sure you print daily! On top of the costs of the ink I also live on an island where we pay 22% import duty on most things so it gets even more expensive to not use it and dump ink vs using it!
Hi - Just to manage the issue of purging & not including bigger images or wall stuff. Is there any merit in printing off a card ( A5 / A6 ) every couple of days - with a view to storing them & then using them at Christmas or some other festival. I send about 50 Christmas Cards so that's about 100 - 125 days ( If I print one every 2nd to 3rd day ) - then with the odd calendar ( 12 prints ) & other reasons I can meet the printing frequency - Perhaps one item on Mon / Wed / Fri each week. Would this meet the requirement of regularity & avoid purging !!? I'm definitely 'Over the Edge' ^_* - but just trying to choose between the Canon 300 & the 1000 - I don't like the smaller cartridges - I wonder what the maths is when comparing your sums between a 300 / 1000 Thank you for taking the time to make the video !
That is an EXCELLENT idea! And yes, would avoid going to the purge cycle. I wish I knew more about other canon models… but I think you’re on to something with the Christmas card idea!!!
I’m trying to decide between the 1000 and the 300. Cost is not a factor except that I hate the idea of wasting ink when not printing. Does the the 300 have the same maintenance cycle? I thought one printer effectively had to tossed once the ink bin was full but maybe that was an Epson. Finally, maybe a video on framing.
As you are using OEM inks you can get a more realistic ink usage by using the software in the printer. Also i am pretty sure there was a firmware update that allows a custom print size of up to 1.2mtrs (4ft) now .
I think I heard this too about the update! I will have to try it... and then find a piece of paper that long to print from (as I dont have a reel!) thanks for stopping by :D
@@mallorydavisphotography If you can get fotospeed papers in the USA? They sell panoramic sheets. If not then A2 ( 17x24 ) sheets can be cut length ways to create a panoramic sheet.
In yr 4x6 example how did you calculate the cost of ink per sheet? Ie vol of ink used per sheet? hence cost per sheet. If volume of ink is based on area sheet. This assumes equal colour usage which isn’t so. If the 4x6 print has a height of ink 0.75mm I can get your number. I assume it is a number provided by cannon? Can you clarify the 8 cents per sheet per print. Richard from Australia. Ditto larger sheet calc. Enjoyed your simple and clear explanation. Cheers Richard in Australia
I'm lucky as far as printer paper is concerned. I'm an old school buddy of the general manager of a major paper manufacturer here in Oz and I can get pretty much all of my paper at a substantial discount😊😊 Including all of the premium photo papers. I'm an Epson fan and I want to get myself their big desktop photo printer, the SureColor P5070. It's quite a bit more expensive than the Canon, but it's a fantastic printer. Though, the Canon is a good printer and if the cost is substantially less, then it could be an alternative. I could also get an Epson P906, which is pretty much like the Pro1000, but the inks are a lot cheaper than the Canon inks. $25 per cartridge cheaper. The printer is a little dearer, though, but not by much.
Hi Mallory, thanks for a very valuable clip: you set things out nicely, and your reasons are certainly valid. Writing from Australia, I was quite surprised to find - after checking current exchange rates - that the numbers for printer and paper were similar Down Under, although our ink replacement cost is around USD$180 less. I'm going through much the same thoughts and process as you do in this clip, and shall look up your "1 year on..." clip. Like you, I like the idea of the image made "real" in my hand or on my wall - I feel that the job is incomplete until I do.
Maybe we can look at it this way ... What is the overhead cost per day of just having the printer sit there not doing anything? How long would it take for the cleaning cycles to use up all the ink?
As plenty of others have written before me, what an amazing review! I'm literally inches (if not millimeters haha) from buying this printer and I loved this! However I have one question: where did the printing with ink cost come from? I mean, I understood the paper cost, but then I got lost on how for eg a 4x6 went from being $0.14 to $0.22c. Thanks and great vid :D
Dead Hollywood, Ca. photo labs are all closed now it's just not like the 80's anymore.. Samy's camera has a Pro 1000 that I'm interested in and you've answered all of my questions. Thank you.
I’m thinking about buying this product. I’d seen that B&H video a great deal on an open box product. But the associated cost of printing has me a little afraid to take this printer on.
Very informative, thank you. I hope to also find similar info on the 200 and 300 models. I gave up on home printing years ago but still miss the convenience. Epson 740, Canon i960, ALPS sub dye … all suffered from infrequent use (and more).
May I ask how did you calculate ink costs for 17x22" ? In your calculations paper and ink for 1 print 17x22" costs $5.80, so $5.80- 2.40 (paper cost)= $3.40 for the ink only. So price of full set of cartridges is $700 / $3.40 = 205 prints from one set of cartridges. Did you calculate costs on low quality printing ? I'm asking because on other websites people says that they can get about 40 prints of one set of cartridges and you get 205.
Thanks for the honest review and I hope Pro 1000 print heads are cheaper and last longer! My IPF6400 print heads need replacing every 4-5 years and they cost $490x2!! maintenance cartridge $80/year plus ink that runs approximately $85 for 130ml cartridge X 12 and I am not a heavy user!! But prints are gorgeous color or black white. I have not experienced head clogging with IPF6400 like I did with my Epson large format printer but certainly Epson print heads lasted much longer.
Thanks Mallory...I absolutely have to take the process from beginning to end. Printing teaches you so much about your work. I exhibit my prints so I enjoy the best printer like the Canon Pro 1000. Here in NYC you can buy this printer at BH for $1249.00 and the refill cartridge for $15.00. I print mostly very large but I love your tip of making small prints to keep the printer happy...something I only do as tests..sometimes I stick one of those images on a blank greeting card and it makes for a lovely presentation! Thanks again and keep printing. Im with you! Jan in NYC
Question, can you flush the pront head, and then not print for a week or so? Ie after cleaning do you need to reclean every few days? Ie print a load of prints, then flush to clean the head then hibernate for a while??
Would you recommend canon pro 200 or 300 for color photos mainly for home use? I love the vivid color of the 200 and the speed of print, but the color realism, black (on color prints) and longevity of print on the 300 is nice too.
What a wonderful video. When I saw the astrophotography images I wondered if you lived out in the country. I agree owning the whole process certainly adds more to the craft. I myself went for the Pro-300 which uses the same pigment ink as the Pro-1000 and will print A3+ and apparently panoramic rolls (to a certain length). I was shocked when you said how much the Pro-1000 ink costs, that is the price of the Pro-300 printer!!, You do get a lot more ink though, the Pro-300 cartridges are 14 ml each. Also being in the UK I have to ask, those sweets called Smarties on your desk, here in the UK smarties are similar to M&M's (the chocolate only ones) the Smarties you have on your desk look like a sweet we call refreshers.
Correct! This is what I have done (typically with film scans so I don't have to pay to print my film images at the lab) to keep waste down and I've noticed a big difference!
Do printing services, such as MPIX for example, use a high-quality printer such as the PRO-1000 when a customer orders a print from them? Generally, the prints I have had made through many of these printing services have not been good. I spend a great deal of time editing my photos to the colors I desire. So many of the prints come back not even close--often even muddy colored. And then when I ask the printing services what photo printer is used, it is less quality then the Canon 1000. If a printing service uses the Pro-1000, I would gladly order from them. So far I haven't found one.
Thank you for the detailed breakdown on printing costs. You did a fantastic job!!! Cheers. I have question about the printer head replacement? Someone is selling this printer for $200 however, it’s been collecting dust for a minute so there is a good chance the printer head will need to be replaced. At a glance, the printer head costs almost $800!!! Have u had issues with printer head errors etc? Moreover, do you think the printer’s existing printer head is salvageable with a good cleaning? Please advise when time permits. Thanks MD Xx
Thanks for the video. I'm trying to get motivated to print again! These 17x22" prints are such an impactful way to show our work, much better than a website when showing someone in person.
@@mallorydavisphotography If you will print several images and put them up on the same wall, a video about how you select them to fit together and create the mood you want would be great. Thanks!
Such a cool video... I've been into photography both professional and personal for about 20 years and the amount of printing I do is about 1% of ALLL photos I take. I archive everything on hard drives and my iPhone but yea it totally gets lost in the mix. I know that outsourcing some larger prints is for sure $$$ and I like that control which is sometimes hard to find and consistency. Photography isn't my main source of income but I wouldn't mind selling or trying to sell a few larger prints here and there. I Do however like the idea of your photo album.... I have two girls under 2 and I've created a cool photo book of the 1st one being a year but I think moving forward it would be cool to create books like you shared to look back on just like I remember growing up with when I was growing up. Would you say you need to print something pretty much weekly to keep up with the maintenance?
Be aware that Canon offers NO REPAIR SERVICE whatsoever on the Pro 1000 printer. If you have a significant issue and the printer is out of warranty your ONLY option is to purchase a new printer (they will replace the printer under warranty). My Pro 1000 refused to power on and Canon tech support ultimately said it was dead. The rep said they DO NOT offer ANY repairs on the Pro 1000 so my only option was to purchase a new printer. I'm now looking at the Epson SC5000 since Epson does offer repair services on their printers.
You're not the only one to have commented about this... seems Canon is funneling most of their R&D dollars to digital cameras these days... hopefully soon!
Thanks for your informative video. I am close to investing in the Pro 1000. Your sums were very helpful. I do have questions. How will this printer perform on canvas and will just printing black and white reduce ink costs ie by just replacing black. Cheers from Australia.
My problem is the issue of the ability to frame the photos. I am not sure how complicated it is to frame paper prints. Do you frame the photos yourself and if so can you summarise the process. I also happen to live the country and it would be great if I can control the entire process at least where framing simple paper prints are involved. Finally do you have any experience using the Canon PRO-2100 - would it be fair to say that it's a more advanced printer than the pro 1000? Thanks in advance :-)
Hi there!!! First, thank you for watching! As for the framing, I am doing very simple frames in my home from IKEA for my large 17x22 prints. I can share the link if you’re curious? Unfortunately I’m not familiar with the 2100… I imagine it does reel printing?? Best!
Agreed! I'm a second-generation, film-to-digital photographer and have started exploring doing the printing myself. I lived in Buffalo for a bit and am a huge fan of a family print business (iprintfromhome) - decent prices, good selection of print options, excellent work and studiously careful handling and shipping. For me, the real sticker shock has always been the framing. IKEA (_love those guys!!_), God bless 'em... they do have very reasonable frames. But if you're aiming for top drawer, it's a huge bite out of the wallet. I'm tempted to take up woodworking and learn to do the framing myself... ;-) Cheers, mates! J
I am a photographer who wants to invest in a printer that prints canvas. is this printer capable in printing canvas? if yes, Pre cut or roller canvas? what type of canvas is best for it? thank you.
Thanks for the informative video. Figuring the cost of ink per ml is easy enough, but how did you figure the amount of ink it takes to print a, lets say, 17 x 22? I also am a new subscriber.
Thank you for breaking down the costs, this video was really helpful! I'm buying a second hand pro 1000 next week from a professional photographer so I'll hopefully save a little money there!
I think as a photographer you have to decide if the convenience is worth the cost. To me, it absolutely is, and to have the freedom and ability to control the process from beginning to end is invaluable. Great video!
Thanks for your video. Here is my experience using the pro 1000 printer the past 2.5 years. Yes, print a lot and never switch it off. This printer is very reliable. I print about 800- 900 prints a year. Mostly A4, A3+, A2 and some panos up to 1.2m. Never smeard or failed so far. If you only print up to A3, the Epson ET8550 is a good alternative or ET8500 up to A4.
Thank you for sharing this information. I am pretty new to the field of photography but has been a passion of mine for most of my life. I am actually about to purchase one of these printers and have been sleeping on the idea of wether or not to do so, mainly due to the cost. I am a new subscriber to your channel and will probably be viewing more of it over the next few days but perhaps if you wouldn’t mind maybe answering a few questions that I may have about the business and operation of this particular printer in the near future. Also, your photos are top notch. I’m impressed. Again, thank you for sharing, many blessings to you and yours. Peace
Hi Anthony! Thanks so much for watching and the comment! I can't emphasize it enough, if you aren't printing regularly (several times a week), you will lose money with this printer! I wish there was another way around the ink purging... but that's the way it was designed. Happy to support your decision with any questions you may have though!
@@mallorydavisphotography thank you more for producing this video for me to watch lol, it was definitely the most helpful one I ran across. I am actually hoping to be printing mostly full time. That is my hopes anyway. Thank you for replying as well, you are the only one who has actually, but you answered my question. Several times a week shouldn’t be a big issue for me. So thank you again and many blessings to you and yours.
@@mallorydavisphotography "another way" exists Mallory, as my lengthy comment above explains. Using QImage to print and using it's scheduled nozzle check option, keeps that in check, plus getting the Precision Color Ink system saves SO MUCH money in addition.
Very well explained Mallory. I will be purchasing this printer very soon. Question for anyone here: what is the smallest and largest this printer will do? Thanks in Advance!
So is the ink pigment or die that makes a huge difference it can't be called fine art if it's not pigment. I've been looking for a good printer to print my Astrophotography photos this printer is too small for me though so im looking into a large format printer to do 36 x infinity.
WOW you are over paying for the paper and ink per sheet cost. I have the 1000 and my cost is way less on the 17x22 and also I only pay 15 dollars for the maintenance cartridge.
I have the Pro 200 and it's great albeit a little expensive to run with the inks costing around £150.0 per set. The results are fantastic but I don't use it that much, I have smaller printers for smaller images and test prints. I would love to have the Pro 1000 but the ink costs are crazy for home use.
Good comments about owning a Pro 1000. I have owned one for about 1 1/2 years. I got it because I do print larger size prints....usually 16"x20" or 16"x24" of my astronomy photos which I sell. I also print any smaller sizes such as 8"x10" for my normal photo business.I also print small 4x6" prints for family photos such as vacations. I previously owned two Epson pro printers that could also print that size. Both had lots of problems with spitting of ink and finally both died.... that is why I went with the Canon which to date has been problem free. Those who think the printer uses a lot of ink don't realize that the ink is not used directly from the cartridges. Instead it is pumped into feeder tubes so a new print will draw ink into the tubes so it seems after loading the tubes you have used about 40% of the ink.... that isn't correct.... it is in the machine waiting to be used. The next set of inks you get will show a more realistic remaining ink in the printers display. The most important thing is you need to print every day or two.... doesn't have to be a big print.... a tiny print say 4"x6"is all it takes. Some even print a tiny 1" block but I like the idea of using all the nozzles to keep them cleanr. I use QPrint which is an excellent app to print from with some features beyond the built in one in Adobe Photo Shop. The neat part is you can setup an automatic print so it will print a very small print each day at a specific time using all the nozzles. The Qprint has that ability built in. The other way to reduce ink usage is DO NOT turn the printer off. If you do each time you start it up it will go through a purge cycle and waste ink. In my case I even got an inexpensive batter UPS that prevents the printer from turning off in the event of a power outage. You most likely won't be able to print but at least the printer will stay on as you wait for the power to come back on.
Many of these tips and tricks I learned from Jose Rodriguez who has some wonderful videos on TH-cam.
You implied this.... but I found it cheaper to buy the paper in rolls and than you can cut them to the exact sizes you need. I am a professional photographer and astronomer so I tend to print standard sizes as well as odd sized so being ablel to get the most efficient useage of my paper is an advantage. I recommend is taking those cut sheets and placing under a board with weight on it to flatten the sheets so they feed smoothly. I found that Epson doesn't have replaceable print heads whereas Canon Pro 1000 does. I haven't needed mine replaced but that is a nice advantage so you don't end up with a doorstop as my two previous Epsons. Finally MAKE sure you have updated the firmware of your Canon to the latest. The newer firmware has more efficient use of ink and now allows a maximum print size of 17"x48" so real panos are now possible. There are companies that sell aftermarket ink cartridges and also there is a couple of companies that sell what you need to use their cheaper inks and refill you old cartridges. I am not a proponent of that but there are any that do refill or use aftermarket inks. I have found on other printers you do save money but consistency or print life span may degrade. Some colors are very hard to match such as Canon Red and Purple so that may be problematic.
Finally while the Canon Pro 1000 is a fantastic printer people need to be realistic about how much they will use it and what print sizes. For hobbiests who only print a few prints it is not a smart choice. You would be better with an outside processing company or get a cheaper smaller max print size printer and use a print service for the few large prints.
The Canon has a utility that you an use to tell you exactly how much each print costs. That is a good tool to use to keep your printing costs in control.
This is what I was looking for. I had heard that Canon upgraded the firmware to allow the printer to produce larger than 17X22. I bought a P800 at about the same time that the Pro 1000 came out for one reason; at the time, the Pro 1000 was limited to 17X22, but the P800 could not only print larger, it had the roll option. I recently sold my P800, but will be getting another printer. If my budget allows, it'll be the new 24" Canon printer, but if my budget says no, then I'll buy a Pro 1000.
You forgot to mention that to replace the printhead is $726...
I have been using Canon PRO printers for 15 years. Currently using a PRO 2000 24" but looking at getting a PRO 1000 for printing smaller cut sheet prints (The PRO 2000 does not have a paper tray for handling cut sheets) I love the results and the PRO 1000 uses the same inks, print head and processor as the PRO 2000...
512€ with tax here in germany for the print head of a 1000 pro
Hi Mallory. I sell prints and use an Epson P800. I bought it instead of the Pro1000 because at the time, the 1000 would only print 17x22 as you mentioned. The P800 had a roll paper option which swayed me to the Epson. Since then, Canon updated the firmware to allow the 1000 to print longer. One thing you might mention at some point is that the bigger the ink cartridge is, the less ink costs per milliliter. The ink cartridge for the old Pro 100 was about $1.30 per ml. My P800 with an 80ml cartridge is about $.70 per ml. Jump to the 160ml and beyond, the price per ml drops further.
For small prints, I really enjoy using the Canon Selphy CP1300.
That was very interesting and helpful. You have a calm demeanour and your videos are very easy to watch and I find that I absorb the messages in a lasting and simple way. I only produce imagery for my own personal use and find photography a valuable kind of therapy for the good of my mental health. But I admit that just viewing the results on a computer screen often feels somewhat pointless and I would probably benefit from displaying printed pictures from time to time. This particular printer certainly isn't aimed at the likes of me, but I now know more about what I could potentially get for my money and if I keep looking at lesser Canon models I ought to be able find something suitable. Your images are beautiful and I can see that the way you organise yourself maximises your many obvious talents. Thank you for sharing all this with us.
What kind words, Michael! I'm so glad you found this video helpful in your purchase journey. I can't recommend printing your work enough! Even if you send them to a local drug store or store for 4x6 ... there is something so magical in completing the cycle of - starting with an idea, using the camera to capture an image, then holding that image in your hand later. Happy shooting and thank you again for the kind words and tuning in :)
Thank you very much Mallory for your video, I am an amateur landscape photographer but when I think about sending out to make a print I always cringe at the cost of big prints... I was hesitant to buy the pro1000 until now but the more I see videos like yours I am more and more convinced that I need to print my own work... Thank you!!!!
So glad this was helpful for you, Massimo! It truly brings the photography experience full circle :) Thanks so much for watching!
Hi Mallory, great that you mentioned the ink going into the maintenance cartridge. I print a moderate frequency, but I still have more ink going into the maintenance cartridge than onto paper! I previously had an Epson P900, which used much, much less ink. But its paper feed mechanism was terribly unreliable, so I got the Pro-1000, which has proven very reliable. Even with the ink the Pro-1000 "wastes", ink is still a relatively small cost of a big print (including paper and mounting, and really you should camera and lenses and time taken) and is tiny compared to the price the print is sold for.
Thanks for your video. It's IMPORTANT to use the Canon Accounting Management (CAM) software, made for these types/level of printers. Using the Canon Accounting management software, we can obtain more exact printing costs because it takes readings in real time from the printer based on parameters entered for the cost of paper and ink, which can be entered manually. It's pretty simple, except initial setup, not so much, and Canon doesn't offer proper support for setting up the CAM software. I'm happy to help if anyone needs! The CAM software is the BEST way to know what is being spent for ANY given photo. I have started an Iris Photography business, aside from my headshot and event photography. Iris as in one's eye. Pretty iris photos with a black background, mostly using luster paper, and mostly Black ink, Gray and some minor other color inks and Chrome Optimizer. For example, an 8 x10 inch print using Canon Pro Luster paper on 8.5 x 11 inch paper runs on average, $1.50 for ink and paper. Average cost using Pro Luster A3+ paper and printing an 11 x 14 inch photo (on A3+ paper) is $2.20 - $3.10 each (paper & ink). Again, this is Canon OEM ink and Canon paper. I have decided after long hours of research to now start using Precision Color Inks and the Precision Color Ink Warning System. Inks are on average, HALF the cost of Canon OEM! I am not an affiliate nor do I get any kick back from this company but the guy who runs/owns the company (Mike) is SUPER helpful with understanding how his warning system operates and his ink prices are a fraction of the Canon OEM inks. www.precisioncolors.com/ ALSO, QImage printing software is one of the best ways to print since it allows a higher level of control - PLUS - QImage allows a schedule to do a nozzle check so we're not wasting more ink for head cleanings. It can be set to run a full or half page nozzle check at any time of the day that works. Canon's Professional Print & Layout software is good but QImage is bit more straight forward. Sincerely! Richard
You deserve more likes. Thank you. I do not have this printer yet, but I'd love to own one.
I also had the Canon pro-1000 and bought a 17 inches roll Canon paper and cut it to size myself that works perfectly and saves a lot of money.
Now have the Canon pro-2100 and it is very nice that you can put a roll in it. It's a pity that you don't have a roller system on the pro-1000. I think it is possible an equal Epson. Nice video...
Great tip! I would have never thought about that!!! Maybe I could rig a system near the printer to hold a roll....... but then how would I do a clean cut.... all things to think about!!! Thanks for watching, Fred!
Yep, all the Epson photo printers can use roll paper. The Epson SureColor P906 (their smallest pro printer) can print up to 18 metres in length, 17 inches wide.
@@mallorydavisphotography you could have the print feed onto a paper trimmer.
What a great idea for a video. Haven’t seen anything like this from any other contributors. Perfect information for a dedicated amateur considering the expensive step into printing at home. Great quality production too. Really glad I found your channel!
Thank you so much, Steven!!! Great feedback and can't thank you enough for watching and hope to see you again :D
People get into/have videos on cost. I think it is Red River Papers have info on print cost. I also believe the Pro 1000 has some kind of cost/accounting software.
Love your videos. This is the second time I watched the Canon Pro 1000 vids. I just ordered it from B&H. Thanks for your help in making the decision.
Thinking about pulling the trigger on one of these, this was helpful. Great video.
Thank you for video and calculating cost. I don't print often, so it's not worth buying this printer. But I couldn't know without your video. Thank you very much. Greetings from the Czech Republic, Milan
Great video, that for sharing. I love my pro-1000 but can't seem to get it to print fully on 4 x 6 or 13 x 19 paper, the printer wants to add a margin around it and can't get it to bypass it. Any suggestions? Thx
Excellent video, but not clear to me is how you calculated the ink/print costs. Did you use an app to measure that? Or if not, the printer comes with ink cartridges that may only be filled partially and the purpose if that ink is to fill the lines between the ink cartridge and the print head/nozzles. There's some "bonus" in there but the cartridges will not be empty all at the same time, so making penny precise calculations, is difficult from this.
Anyhow, printing with an A2 printer too, my conclusion is the same. And we can choose whatever (top) paper quality we want, while using top quality inks. With the printing companies it is not always transparent that you get museum quality prints (or a notch less good "archival" quality, that still may be better than the print company's).
The maintenance cartridge is a fact of life and probably making one print per week already is enough to prevent the printer from ever going into maintenance mode to dump stale ink or prevent clogging of the nozzle.
Personally, I invested on top of the printer, inks, and paper in a calibration device for my monitor and for prints, too. That and making test prints adds to the costs and hassle. But with the calibration, testing is reduced to a minimum. No, I cannot earn back the material costs of calibration but not having to make as many test prints (time) is worth it.
I now live about 3½ hours away from Austin and San Antonio, out in West Texas. I bought my Sony A7R2, used, from Precision Camera in Austin, back when I lived near their store. Being out in West Texas is definitely taking some getting used too. But I'm starting to think of some unique photo opportunities out here.
Glad to hear that!!! We're headed west in a few weeks (Big Bend!) and cannot wait!
How many prints 17x22" high quality typically you can get from one set of cartridges ?
This I would also love to know.
thank you for your perspective on the printer. Are you going to add more video's on this printer. such as set up and down loading of ICC files along with monitor and printer calibrations?
This is beyond helpful. Thank you so very much, Mallory.
Great review spot on! I have had this printer for about 2 years now and I can say for sure that you need to use this daily even if for a small print to keep it from going into a maintenance cycle. In the 2 years I have changed the maintenance cartridge twice and have about 1/4 full on the third. I have gone through 1 1/2 complete sets of ink and most of that went into the cartridges. So if you are thinking about this printer make sure you print daily! On top of the costs of the ink I also live on an island where we pay 22% import duty on most things so it gets even more expensive to not use it and dump ink vs using it!
Hi - Just to manage the issue of purging & not including bigger images or wall stuff.
Is there any merit in printing off a card ( A5 / A6 ) every couple of days - with a view to storing them & then using them at Christmas or some other festival. I send about 50 Christmas Cards so that's about 100 - 125 days ( If I print one every 2nd to 3rd day ) - then with the odd calendar ( 12 prints ) & other reasons I can meet the printing frequency - Perhaps one item on Mon / Wed / Fri each week.
Would this meet the requirement of regularity & avoid purging !!?
I'm definitely 'Over the Edge' ^_* - but just trying to choose between the Canon 300 & the 1000 - I don't like the smaller cartridges - I wonder what the maths is when comparing your sums between a 300 / 1000
Thank you for taking the time to make the video !
That is an EXCELLENT idea! And yes, would avoid going to the purge cycle. I wish I knew more about other canon models… but I think you’re on to something with the Christmas card idea!!!
I’m trying to decide between the 1000 and the 300. Cost is not a factor except that I hate the idea of wasting ink when not printing. Does the the 300 have the same maintenance cycle? I thought one printer effectively had to tossed once the ink bin was full but maybe that was an Epson. Finally, maybe a video on framing.
As you are using OEM inks you can get a more realistic ink usage by using the software in the printer. Also i am pretty sure there was a firmware update that allows a custom print size of up to 1.2mtrs (4ft) now .
I think I heard this too about the update! I will have to try it... and then find a piece of paper that long to print from (as I dont have a reel!) thanks for stopping by :D
@@mallorydavisphotography If you can get fotospeed papers in the USA? They sell panoramic sheets. If not then A2 ( 17x24 ) sheets can be cut length ways to create a panoramic sheet.
In yr 4x6 example how did you calculate the cost of ink per sheet? Ie vol of ink used per sheet? hence cost per sheet. If volume of ink is based on area sheet. This assumes equal colour usage which isn’t so. If the 4x6 print has a height of ink 0.75mm I can get your number. I assume it is a number provided by cannon? Can you clarify the 8 cents per sheet per print. Richard from Australia. Ditto larger sheet calc. Enjoyed your simple and clear explanation. Cheers Richard in Australia
I'm lucky as far as printer paper is concerned. I'm an old school buddy of the general manager of a major paper manufacturer here in Oz and I can get pretty much all of my paper at a substantial discount😊😊 Including all of the premium photo papers. I'm an Epson fan and I want to get myself their big desktop photo printer, the SureColor P5070. It's quite a bit more expensive than the Canon, but it's a fantastic printer. Though, the Canon is a good printer and if the cost is substantially less, then it could be an alternative. I could also get an Epson P906, which is pretty much like the Pro1000, but the inks are a lot cheaper than the Canon inks. $25 per cartridge cheaper. The printer is a little dearer, though, but not by much.
I am in between getting Pro 1000 used (closed box still) for $800 or !3k for pro 2100 large format
Hi Mallory, thanks for a very valuable clip: you set things out nicely, and your reasons are certainly valid. Writing from Australia, I was quite surprised to find - after checking current exchange rates - that the numbers for printer and paper were similar Down Under, although our ink replacement cost is around USD$180 less. I'm going through much the same thoughts and process as you do in this clip, and shall look up your "1 year on..." clip. Like you, I like the idea of the image made "real" in my hand or on my wall - I feel that the job is incomplete until I do.
Thank you for sharing. Love it a lot,
Thank you for the video, I like quality prints, but I don't print often enough. I got the answers to my dilemma , "to buy or not to buy". ;)
So what do you do when you are going to be away from your printer for a month or three?
That’s why I’ve got the Pro 300 instead. Does not need maintenance cycles. Never had issues so far, even when I didn’t use it for months.
Maybe we can look at it this way ... What is the overhead cost per day of just having the printer sit there not doing anything? How long would it take for the cleaning cycles to use up all the ink?
Approximately on avarage, how much ink does the printer use pr. square unit? Or sheet size if you like ;)
As plenty of others have written before me, what an amazing review! I'm literally inches (if not millimeters haha) from buying this printer and I loved this! However I have one question: where did the printing with ink cost come from? I mean, I understood the paper cost, but then I got lost on how for eg a 4x6 went from being $0.14 to $0.22c.
Thanks and great vid :D
Think she was reffering to the cost of the ink being $0.08c so add the cost of the paper at $0.14c the total is $0.22c
Dead Hollywood, Ca. photo labs are all closed now it's just not like the 80's anymore.. Samy's camera has a Pro 1000 that I'm interested in and you've answered all of my questions. Thank you.
I’m thinking about buying this product. I’d seen that B&H video a great deal on an open box product. But the associated cost of printing has me a little afraid to take this printer on.
Very informative, thank you. I hope to also find similar info on the 200 and 300 models.
I gave up on home printing years ago but still miss the convenience. Epson 740, Canon i960, ALPS sub dye … all suffered from infrequent use (and more).
May I ask how did you calculate ink costs for 17x22" ? In your calculations paper and ink for 1 print 17x22" costs $5.80, so $5.80- 2.40 (paper cost)= $3.40 for the ink only. So price of full set of cartridges is $700 / $3.40 = 205 prints from one set of cartridges. Did you calculate costs on low quality printing ? I'm asking because on other websites people says that they can get about 40 prints of one set of cartridges and you get 205.
curious about the same, not understanding the metric.
Love your videos on this printer! I have one myself. You can actually print panoramas up up to 47 inches
Have this printer. Love it. Do you have an idea on ink cost for 8x10? Printing a lot of those.
This video as such important information. THANK YOU! 😊🙏
Gracias, me ha servido de mucha ayuda. El costo por impresión compensa si imprimes unas copias cada semana.
Oh and one more thing. May share your framing process
Great call!!! I will add that one to the list :)
Thanks for the honest review and I hope Pro 1000 print heads are cheaper and last longer! My IPF6400 print heads need replacing every 4-5 years and they cost $490x2!! maintenance cartridge $80/year plus ink that runs approximately $85 for 130ml cartridge X 12 and I am not a heavy user!! But prints are gorgeous color or black white. I have not experienced head clogging with IPF6400 like I did with my Epson large format printer but certainly Epson print heads lasted much longer.
great video, thanks. I think you made a mistake calculating the ink cost for the 17x22 print.
Thanks Mallory...I absolutely have to take the process from beginning to end. Printing teaches you so much about your work. I exhibit my prints so I enjoy the best printer like the Canon Pro 1000.
Here in NYC you can buy this printer at BH for $1249.00 and the refill cartridge for $15.00. I print mostly very large but I love your tip of making small prints to keep the printer happy...something I only do as tests..sometimes I stick one of those images on a blank greeting card and it makes for a lovely presentation! Thanks again and keep printing. Im with you! Jan in NYC
Where you get refills for cartridges?
@@2k9flash It's not an ink cartridge. It's the ink waste cartridge, which run $15 each.
Question, can you flush the pront head, and then not print for a week or so? Ie after cleaning do you need to reclean every few days? Ie print a load of prints, then flush to clean the head then hibernate for a while??
Would you recommend canon pro 200 or 300 for color photos mainly for home use? I love the vivid color of the 200 and the speed of print, but the color realism, black (on color prints) and longevity of print on the 300 is nice too.
Mal - would you project the same costs for the new pro 1100?
Do you know for 17” x 22” size paper … how many page I can print by one set of cartridges?
What a wonderful video. When I saw the astrophotography images I wondered if you lived out in the country. I agree owning the whole process certainly adds more to the craft. I myself went for the Pro-300 which uses the same pigment ink as the Pro-1000 and will print A3+ and apparently panoramic rolls (to a certain length). I was shocked when you said how much the Pro-1000 ink costs, that is the price of the Pro-300 printer!!, You do get a lot more ink though, the Pro-300 cartridges are 14 ml each. Also being in the UK I have to ask, those sweets called Smarties on your desk, here in the UK smarties are similar to M&M's (the chocolate only ones) the Smarties you have on your desk look like a sweet we call refreshers.
This would be fun and saves more with film photography also!
so printing a 4x6 every other day will prevent the maintenance cycle?
Correct! This is what I have done (typically with film scans so I don't have to pay to print my film images at the lab) to keep waste down and I've noticed a big difference!
Plus the cost of the printer?
Do printing services, such as MPIX for example, use a high-quality printer such as the PRO-1000 when a customer orders a print from them? Generally, the prints I have had made through many of these printing services have not been good. I spend a great deal of time editing my photos to the colors I desire. So many of the prints come back not even close--often even muddy colored. And then when I ask the printing services what photo printer is used, it is less quality then the Canon 1000. If a printing service uses the Pro-1000, I would gladly order from them. So far I haven't found one.
Yes helpful. I too have this printer and printing is the closer to any photography journey on any given day.
Absolutely! Thank you so much for watching, Jennifer!
Excelent, thank you very much for putting down the numbers!
What kind of ink does it use? Idk it pigment, inkjet or something else?
The cost breakdown is helpful info. Trying to justify a printer purchase now.
So glad it helped! thanks for watching!
Thank you for the detailed breakdown on printing costs. You did a fantastic job!!! Cheers. I have question about the printer head replacement? Someone is selling this printer for $200 however, it’s been collecting dust for a minute so there is a good chance the printer head will need to be replaced. At a glance, the printer head costs almost $800!!! Have u had issues with printer head errors etc? Moreover, do you think the printer’s existing printer head is salvageable with a good cleaning? Please advise when time permits. Thanks MD Xx
Thanks for the video. I'm trying to get motivated to print again! These 17x22" prints are such an impactful way to show our work, much better than a website when showing someone in person.
100%!!!! I couldn't agree more. I want to overhaul my entire wall and re-print a new selection ... perhaps I should do a video on that!?
@@mallorydavisphotography If you will print several images and put them up on the same wall, a video about how you select them to fit together and create the mood you want would be great. Thanks!
Such a cool video... I've been into photography both professional and personal for about 20 years and the amount of printing I do is about 1% of ALLL photos I take. I archive everything on hard drives and my iPhone but yea it totally gets lost in the mix. I know that outsourcing some larger prints is for sure $$$ and I like that control which is sometimes hard to find and consistency. Photography isn't my main source of income but I wouldn't mind selling or trying to sell a few larger prints here and there. I Do however like the idea of your photo album.... I have two girls under 2 and I've created a cool photo book of the 1st one being a year but I think moving forward it would be cool to create books like you shared to look back on just like I remember growing up with when I was growing up. Would you say you need to print something pretty much weekly to keep up with the maintenance?
thank you for touching on costs. I am coming to grips with replacing an older printer
Glad to help!! Good luck in your decision journey :)
@@mallorydavisphotography research is cheaper ;) either of the big two choices would actually work lol
How does it compare to the TC-20? I know the Pro 1000 is better, but it's double the price.
If all I did was print a nozzle check every two days, would that be enough to keep the nozzles clean and stave off "The Purge"?
Should be!!! I actually hadn't thought of that!
Be aware that Canon offers NO REPAIR SERVICE whatsoever on the Pro 1000 printer. If you have a significant issue and the printer is out of warranty your ONLY option is to purchase a new printer (they will replace the printer under warranty). My Pro 1000 refused to power on and Canon tech support ultimately said it was dead. The rep said they DO NOT offer ANY repairs on the Pro 1000 so my only option was to purchase a new printer.
I'm now looking at the Epson SC5000 since Epson does offer repair services on their printers.
Wow!!! So sorry to hear about your Canon issue! Great PSA though….
thank. you .... your info was very helpful I do have a P1000 and will start using it more
So glad to hear that!! Happy shooting :) and thanks for watching!
Does the pixma pro 300 also need to make 1 print every 60 hours??
Thanks, Mallory for an informative review. I'm waiting for an upgrade to the Pro-1000 which is overdue.
You're not the only one to have commented about this... seems Canon is funneling most of their R&D dollars to digital cameras these days... hopefully soon!
So we have to print something every 48 hours ?
I have pro-100. What I do when not printing is to unplug the printer from the grid to reduce pouring ink.
nice!!! only concern there is this could potentially clog the lines and decrease print quality... but I could be mistaken!
V/good information, so very well presented. Keep it going and good luck ........👌🤞
How much pictures size 4x6 inch can be printed by this print ?
Very helpful! I’ve been thinking about this printer, a long time.
Glad it was helpful! Catch you on the next vid, T-Bone!!!
Super helpful video! Thank you for the detailed cost breakdown.
Glad it was helpful! Thank you for watching!
You did not cover the cost of ink per photo. The paper is cheap. And I don’t understand about the maintenance cartridge.
Thank you for such a comprehensive review, all the best.
Thanks for your informative video. I am close to investing in the Pro 1000. Your sums were very helpful.
I do have questions. How will this printer perform on canvas and will just printing black and white reduce ink costs ie by just replacing black. Cheers from Australia.
My problem is the issue of the ability to frame the photos. I am not sure how complicated it is to frame paper prints. Do you frame the photos yourself and if so can you summarise the process. I also happen to live the country and it would be great if I can control the entire process at least where framing simple paper prints are involved. Finally do you have any experience using the Canon PRO-2100 - would it be fair to say that it's a more advanced printer than the pro 1000? Thanks in advance :-)
Hi there!!! First, thank you for watching! As for the framing, I am doing very simple frames in my home from IKEA for my large 17x22 prints. I can share the link if you’re curious? Unfortunately I’m not familiar with the 2100… I imagine it does reel printing??
Best!
Agreed!
I'm a second-generation, film-to-digital photographer and have started exploring doing the printing myself. I lived in Buffalo for a bit and am a huge fan of a family print business (iprintfromhome) - decent prices, good selection of print options, excellent work and studiously careful handling and shipping.
For me, the real sticker shock has always been the framing. IKEA (_love those guys!!_), God bless 'em... they do have very reasonable frames. But if you're aiming for top drawer, it's a huge bite out of the wallet. I'm tempted to take up woodworking and learn to do the framing myself... ;-)
Cheers, mates!
J
I am a photographer who wants to invest in a printer that prints canvas. is this printer capable in printing canvas? if yes, Pre cut or roller canvas? what type of canvas is best for it? thank you.
Thanks for the informative video. Figuring the cost of ink per ml is easy enough, but how did you figure the amount of ink it takes to print a, lets say, 17 x 22? I also am a new subscriber.
Thank you for breaking down the costs, this video was really helpful! I'm buying a second hand pro 1000 next week from a professional photographer so I'll hopefully save a little money there!
Awesome you found one second hand!! Glad the video helped - HAPPY PRINTING!
I think as a photographer you have to decide if the convenience is worth the cost. To me, it absolutely is, and to have the freedom and ability to control the process from beginning to end is invaluable. Great video!
Totally agree! I want to control the entire process. Thanks for watching and sending some love, Nick!
Thanks for your video. Here is my experience using the pro 1000 printer the past 2.5 years. Yes, print a lot and never switch it off. This printer is very reliable. I print about 800- 900 prints a year. Mostly A4, A3+, A2 and some panos up to 1.2m. Never smeard or failed so far. If you only print up to A3, the Epson ET8550 is a good alternative or ET8500 up to A4.
Great info with a fantastic video presence. You flow through the info very nicely. Keep it up.
Greatly appreciate it, Mike! this one was a little more challenging to shoot so glad you enjoyed it :)
Thank you for sharing this information. I am pretty new to the field of photography but has been a passion of mine for most of my life.
I am actually about to purchase one of these printers and have been sleeping on the idea of wether or not to do so, mainly due to the cost.
I am a new subscriber to your channel and will probably be viewing more of it over the next few days but perhaps if you wouldn’t mind maybe answering a few questions that I may have about the business and operation of this particular printer in the near future.
Also, your photos are top notch. I’m impressed.
Again, thank you for sharing, many blessings to you and yours.
Peace
Hi Anthony! Thanks so much for watching and the comment! I can't emphasize it enough, if you aren't printing regularly (several times a week), you will lose money with this printer! I wish there was another way around the ink purging... but that's the way it was designed. Happy to support your decision with any questions you may have though!
@@mallorydavisphotography thank you more for producing this video for me to watch lol, it was definitely the most helpful one I ran across.
I am actually hoping to be printing mostly full time. That is my hopes anyway.
Thank you for replying as well, you are the only one who has actually, but you answered my question. Several times a week shouldn’t be a big issue for me. So thank you again and many blessings to you and yours.
@@mallorydavisphotography "another way" exists Mallory, as my lengthy comment above explains. Using QImage to print and using it's scheduled nozzle check option, keeps that in check, plus getting the Precision Color Ink system saves SO MUCH money in addition.
So, youll be fine if you print one 6x4 every 60 hours?
Very well explained Mallory. I will be purchasing this printer very soon. Question for anyone here: what is the smallest and largest this printer will do? Thanks in Advance!
This was useful information
Glad you think so! Thanks for watching, Michael!
Great review and production level is up in each video!
Glad you think so! Thank you for watching!!
Awesome review! I had no idea about the 60 hour window on these printers.
Crazy, right?! I don't print THAT often but definitely try to do at least a 4x6 2x a week or so to avoid the dreaded maintenance!
Simply love your video Mallory.
Well said I'm customer Canon with my Pixma Pro 200 that I print on un-conventional papers, but a great results :)
print every 2 days or just before the cleaning cycle
1x1 inch full colour image to avoid the cleaning cycle, saves A LOT of ink
So is the ink pigment or die that makes a huge difference it can't be called fine art if it's not pigment. I've been looking for a good printer to print my Astrophotography photos this printer is too small for me though so im looking into a large format printer to do 36 x infinity.
Thank you 👍
I wish I had watched this video 6 months ago. Thank you for the tips and hope ya'll are safe after Beryl
Thanks for such a detailed explanation, much appreciated.
You are welcome! Glad it was helpful, Tony!
WOW you are over paying for the paper and ink per sheet cost. I have the 1000 and my cost is way less on the 17x22 and also I only pay 15 dollars for the maintenance cartridge.
I have the Pro 200 and it's great albeit a little expensive to run with the inks costing around £150.0 per set. The results are fantastic but I don't use it that much, I have smaller printers for smaller images and test prints. I would love to have the Pro 1000 but the ink costs are crazy for home use.
Great video! Thanks