Good straight forward video but some steps need to be mentioned. The used cooking oil needs to be filtered to remove any large food chunks or sediments left over from cooking. Also the biodiesel is still not yet suitable to be put into any engine as needs to be cleaned with water to remove the methyl alcohol from it.
@@Champagne_on_1ce You just need to put the biodiesel into a bottle or something that you can shake then add water and shake it. The water will separate from the oil in a separate layer from the (now cleaner) biodiesel. You need to repeat this a couple of times to really clean it. It should become less yellow as you clean it.
Try salting out your alcohol to remove water to increase your percent alcohol prior to use to improve yield and help reduce cloudiness of the biodiesel product.
i tried anhydrous ethanol and it didn't work! You could even use less than 70% ethanol if you add a stoichiometric amount, because both water and ethanol aren't soluble in biodiesel.
@@slashshake2371 The presence of water in the biodiesel reaction is detrimental in the process as part of the oil becomes soap. Ingredients to be reacted should be as dry as possible to avoid this side reaction. If possible try using methanol too.
Hey, what type of ethyl/ethanol should be used? Like, ethyl alcohol 96%? Or absolute ethanol alcohol? Im confused. And if methanol is used instead, would I have to change any steps or are there any things that shall be noted?
Try a volumetric ratio of between 1 to 4 to about 1 to 5 of methanol to used cooking oil as trial ratio for starter. Just make sure your reactants are as water free as possible to avoid soap formation which will make separation harder to achieve.
@@xenonhexafluoride9951 hi! I would like to have your paper for reference po since we're conducting an experiment related to this. Your reply would be greatly appreciated ☺️
@@josephespinosa7352 hey can u help me out, i have some questions about it bcs we use it as our research and badly need some1 to entertain some questions. can i have ur email
@@ThienDo-cg2tk If you chose alcohol Then after mixing naoh you will see that the water is getting separated from the alcohol solution and pure alcohol will float above the water, just like oil does..... Then you can reduce the amount of pure alcohol easily
You will have to remove the water in the ethanol to achieve the phase separation between the glycerol byproduct and the ethyl ester fuel. Using any alcohol that is less polar than methanol will require near anhydrous conditions and minimal soap formation for the separation to occur. Isopropanol will be even more difficult since it is even less polar than ethanol. Scaling up the production of fuel with these alcohols will be extremely difficult, especially when using hydroxide catalysts that form water when mixed with any alcohol
Chemical na cya, it's a strong base. You can buy it on shoppe or Lazada. White powder like and be careful, always wear gloves cause it can cause burns. 😊
Hello, can I ask po about dyan sa by product ng biodiesel, which is glycerol? Meron po bang pinaggagamitan dyan? like is it possible po to become a wax and maging component for making candles?
Olá parabéns pelo seu projeto gostaria de saber se o fogo ficou constante no banho maria no aquecimento do óleo por 30 minutos enquanto estava mexendo para a menstruação
hi, @@xenonhexafluoride9951 We’re going to conduct a study similar to this, and I was wondering if you could advise on what type of alcohol we should use for the process. Your response would be greatly appreciated. Thank you!
....IMPORTANT INFORMATION....I think you would do much better by harnessing methane, instead of making alcohol from the grass. Just put a hay bail in a tub of water, put a plastic tarp (trash bag) over the top of the straw / hail bail, with a tube attached sealed not to leak, and as the straw rots, methane will be released, and fill up a tank or bag above, this will give you a constant supply of methane for many weeks....Add some pressure on the bag, that runs your engine, and bingo, cheap gas made from grass, and on you go....What does a hay bail cost 7.00???? Methane is what we see bubbling up from decaying peat in the swamps.....The decaying process burns up the oxygen in the water....So the gas should automatically be separated...
clear and brief, thank you for sharing you idea, since some people do not have all the apparatus, you made our life lot easier, God Bless
Good straight forward video but some steps need to be mentioned. The used cooking oil needs to be filtered to remove any large food chunks or sediments left over from cooking.
Also the biodiesel is still not yet suitable to be put into any engine as needs to be cleaned with water to remove the methyl alcohol from it.
Hi, what procedure needs to be done in washing it with water?, thank you
How would one clean the biodiesel with water? Please lmk, thanks !
@@Champagne_on_1ce You just need to put the biodiesel into a bottle or something that you can shake then add water and shake it. The water will separate from the oil in a separate layer from the (now cleaner) biodiesel. You need to repeat this a couple of times to really clean it.
It should become less yellow as you clean it.
Good work .👌
Try salting out your alcohol to remove water to increase your percent alcohol prior to use to improve yield and help reduce cloudiness of the biodiesel product.
i tried anhydrous ethanol and it didn't work! You could even use less than 70% ethanol if you add a stoichiometric amount, because both water and ethanol aren't soluble in biodiesel.
@@slashshake2371 The presence of water in the biodiesel reaction is detrimental in the process as part of the oil becomes soap. Ingredients to be reacted should be as dry as possible to avoid this side reaction. If possible try using methanol too.
Hi joseph, is there any other way I can contact you? I have questions regarding the process of making biodiesel :>
@@elay4856 are you also from the Philippines?
@@elay4856 my reply with my email address keeps on getting removed
Hello, may I know where dis you get the reference from the procedure of the experiment? Is it by book etc?
Good job sister..
Add conc. H2so4 for crystal clear material and take temp to 130 to 150 degree c
Mam i have one question
This process is success but i will try this process mam thank you mam
Nice I like it .As it is not costly than diesel.
Hey, what type of ethyl/ethanol should be used? Like, ethyl alcohol 96%? Or absolute ethanol alcohol? Im confused. And if methanol is used instead, would I have to change any steps or are there any things that shall be noted?
I would like to ask if what should I do for the washing and drying of the biodiesel? do you have a recommended step by step process?
Nice biodiesel 👍
How much will it cost?
can i ask po? where can we use biodiesel po ung gagana po sana
I have a question about the quantity of methyl alcohol, how do you determine this value? Thank you for your video!
Try a volumetric ratio of between 1 to 4 to about 1 to 5 of methanol to used cooking oil as trial ratio for starter. Just make sure your reactants are as water free as possible to avoid soap formation which will make separation harder to achieve.
I used the ratio of 100mL oil for 20mL alcohol catalyst mixture. Supported by different rrls in my dissertation.
@@xenonhexafluoride9951 hi! I would like to have your paper for reference po since we're conducting an experiment related to this. Your reply would be greatly appreciated ☺️
@@josephespinosa7352 hey can u help me out, i have some questions about it bcs we use it as our research and badly need some1 to entertain some questions. can i have ur email
How to do calculation for addition of reagents
Hi maam can i also use metanol or metahane alcohol
I'm using methanol in my dissertation together with NaOH.
Excellent
Is there any risk during this experiment? I mean which precautions should we tack during this experience?
Wear gloves while handling sodium hydroxide
@@indibro1909 what should i fix if i put alcohol kinda much 😢
@@ThienDo-cg2tk U should better go for 85% ethanol solution
@@ThienDo-cg2tk If you chose alcohol
Then after mixing naoh you will see that the water is getting separated from the alcohol solution and pure alcohol will float above the water, just like oil does.....
Then you can reduce the amount of pure alcohol easily
@@indibro1909 ok ty bro, i will try again
Good video,. Did you say Methoxide?, it should be Ethoxide.
a question whats the temperature for the low heat she mentioned
Concentrate ethyl alcohol ya dilute ethyl alcohol
Concentrated
How to test American standard test?
Is they have any device?
Can you please mention refrence for this test
Is it possible to use a substitute of sodium hydroxide,if so then what can be used as a possible substitute Po thank youu
Potassium hydroxide, lol. Strong base is needed.
How hight must the flame be?
will adding naoh pellets to ethanol result in formation of meth oxide solution?
It will result in ethoxide not methoxide
If you mix naoh with methanol then it will form methoxide.
Put a tap on the bottom and drain off the glycerin
Has anybody tried it??
can i use ethanol 96% or isopropanol?
You will have to remove the water in the ethanol to achieve the phase separation between the glycerol byproduct and the ethyl ester fuel. Using any alcohol that is less polar than methanol will require near anhydrous conditions and minimal soap formation for the separation to occur.
Isopropanol will be even more difficult since it is even less polar than ethanol. Scaling up the production of fuel with these alcohols will be extremely difficult, especially when using hydroxide catalysts that form water when mixed with any alcohol
What is the way to recycle the oil used by car
Look up Black Diesel
ate ano po yang sodium hydroxide may experiment din po kasi kami eh. thank you. :)
Chemical na cya, it's a strong base. You can buy it on shoppe or Lazada. White powder like and be careful, always wear gloves cause it can cause burns. 😊
You can also buy it at places where they sel drain cleaner stuff. It is the same thing.
Paanu Kung 50liter Ang gagawin mu na biodisiel panu po sikat at Ilan litro ng alcohol ilalagay at yun powder
Hello i have questions
Hello, can I ask po about dyan sa by product ng biodiesel, which is glycerol? Meron po bang pinaggagamitan dyan? like is it possible po to become a wax and maging component for making candles?
Glycerol is in the bottom layer kasi mas dense siya compared sa biodiesel. Ang commercial use ng glycerol is sa soap industry.
Olá parabéns pelo seu projeto gostaria de saber se o fogo ficou constante no banho maria no aquecimento do óleo por 30 minutos enquanto estava mexendo para a menstruação
Increas music more
Di ba bawal mag bili po ng sodium hydroxide ma'am?
Meron po sa shopee, boss
Mam ok lang po ba ang 70% ethyl alcohol? Balak ko kasigu gawa ng Biodiesel para sa pump stove namin.
As much as possible hindi dapat diluted yung alcohol na gagamitin mo since the reaction will tend to favor saponification if h20 is involved.
hi, @@xenonhexafluoride9951
We’re going to conduct a study similar to this, and I was wondering if you could advise on what type of alcohol we should use for the process. Your response would be greatly appreciated. Thank you!
I have done in 2002
Lets work together? I got 5 tonne used cooking oil.
It is working
Thanks alot, but you realy need to explain a little more
....IMPORTANT INFORMATION....I think you would do much better by harnessing methane, instead of making alcohol from the grass. Just put a hay bail in a tub of water, put a plastic tarp (trash bag) over the top of the straw / hail bail, with a tube attached sealed not to leak, and as the straw rots, methane will be released, and fill up a tank or bag above, this will give you a constant supply of methane for many weeks....Add some pressure on the bag, that runs your engine, and bingo, cheap gas made from grass, and on you go....What does a hay bail cost 7.00???? Methane is what we see bubbling up from decaying peat in the swamps.....The decaying process burns up the oxygen in the water....So the gas should automatically be separated...