How To EASILY Unclog Ink Jet Print Heads
ฝัง
- เผยแพร่เมื่อ 22 พ.ย. 2024
- How to unclog/clean dried up ink jet printer print head cartridges, best reliable method to get your ink flowing again, and the solution to printing blank or faded pages. When properly done according to this video, you should be able to unclog a dried out inkjet print head. This method will not repair a damaged inkjet print head, nor is any method 100% guaranteed to work on every print head. Have a bowl and paper towels on hand in the event you make a mess! **NOTE: If your print head is separate from the ink cartridge, it may still be possible to clean the print head installed in the printer. Use a piece of plastic under the print head, and apply a very warm and damp paper towel to the print head and follow the procedure as shown in this video.**
**For GREAT deals(Usually cheaper than EBAY) on neodymium magnets, Fidget Spinners, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
**Try this money saving coupon code: aff70ff
Thanks For Watching!
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**
**For GREAT deals(Usually cheaper than EBAY & Amazon) on printer ink cartridges & ink refills, test equipment, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
**Try these money saving coupon codes, or ask if other codes are available: 6% off everything: affiliate6 12% off Home & Garden: BGHome 12% off electronics: elec or measure 8% RC Toys & Hobbies: ToysHo
Hi,
I want to thank you for this tips.
I always had problem when refilling my ink cartridge and it clogged every time. Furthermore I had yo wait for hour before printing and even when I did that, it didn't work every time.
Now I am doing this (with a straw) and it worked so perfectly :)!
How about HP officejet pro 8500A plus printhead? Can you show a video of this printhead?
Throw those inkjet printers in the garbage. Get a color lazer printer. I have an HP 2025 color lazer printer for 9 years, never a problem. From Amazon I get a set of 4 cartridges for $85.00 and they last a whole year.
It is cheaper on eBay like $7.99 for all colors. I use five different colors including the photo print black.
Thank you!
i like this guy!sounds like an north easterner lol in a good way. thank you sir for making a video that is very clear and to the point. 7 years later and your video is still helping folks like myself.
Glad you enjoyed it!
Holy Cow!!! I have spent HOURS following HP's recommendations, aligning, cleaning printer heads (repeatedly), removing all the drivers and reinstalling the printer and drivers and HP smart onto my computer and NONE of it worked....and then (imagine magical angel chimes playing in the background) I watched your video and the problem was fixed in UNDER 30 SECONDS!!!! Thank you SO very much!!
Wow!! After watching dozens of other videos on how to fill cartridges, buying ink, doing all the things I thought would work, this guy comes along and says to push air through the little hole! Well, I could not get a tube to work, so I took the risk and just blew on the hole with my mouth held tight to the cartridge. It worked!! Thank you! I did not get any ink in my mouth, on my lips, or anywhere but the paper towel. It took one firm blow! Now I don't have to go buy ANYTHING!! Thank you soooo much!
You are so welcome Stef! Be sure to look over my wide range of video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No additional cost to you), and most importantly take one minute to share links to my videos with others on social networking sites. Thank you
th-cam.com/users/electronicsnmoreplaylists
You are a genius! I used an empty hair dye bottle and SLIGHTLY pulled back the sticker and used the fine tip on the empty hair dye bottle as a blower to blow out the clogged ink head and it TOTALLY WORKS!!!!
THANK YOU 🎉
Thank you so much for this! I have been refilling my cartridges for over 2 years and always ran into clogs that I could NEVER fix. I tried soaking in Windex, Alcohol, hot water, you name it! I always just ended up buying new cartridges, which defeated the purpose after only being able to refill it once. Who knew it would be as simple as blowing through a straw! You are a lifesaver!
For anyone reading this who uses Canon cartridges where the cyan and yellow chambers are open at the very top (244), this did not make either ink spill over into each others chambers, even after refilling them with 1.5ml of ink! That was my biggest concern when doing this!
BearBear Company Glad my video helped! Please return the favor by sharing my channel with others and rating thumbs up. Also be sure to look over my "useful tips" and "health related" video playlists. Thanks!
You just saved me a new printer. Epic. This is why TH-cam is the most valuable resource on the planet. Thank you
Hi-I can't thank you enough for your method for getting dried out inkjets to work. Your instructions were the clearest I came across and uncomplicated. I'm sure I'll be needing to do this again since it's a common problem and I always had to buy new and expensive inkjets. Thank you, thank you, thank you! N
Glad you liked the video! The best way to thank me, would be by sharing links to my YT channel with many others. Thank you
This is a 8 year old video and it's incredible how this method still work like a charmed on my canon cartridge. I was having problem printing black and white pages. I took the narrow plastic tube of my daughter's water bottle and blew into the hole where I would normally put the syringe and viola, it worked. My pages are now perfect! Thanks for sharing this method!
Thank you for this video! I ran the cartridge cleaner on my HP printer over and over trying to get the black cartridge to print more than half of a line. Probably used half the cartridge trying to get it to work. Decided to check TH-cam and found your video. Used the soaking method and in about one minute have a perfectly working cartridge! Awesome video - thanks again!
Great to hear! Please share my channel with others, and look over my extensive video playlists below for many other videos of interest to you. Thanks for watching
th-cam.com/users/electronicsnmoreplaylists
Just bought a used printer and had streaks on my prints.. I cleaned the cartridge as instructed and am now getting clear prints!! Thank you!
Omg you are a LIFE SAVER!!! I tried so many things and was about to smash my printer before I found your video! I tried for 3 hours to trouble shoot before I found this. THANK YOU!! Luckily the straw I used instead of the tube worked like a charm!
You can add me to the list of happy viewers!! My black and red inks were just not working at all, even after doing the basic and deep cleanings recommended by my printer manufacturer. It took a nice blow into the tube to get that ink running again! What a life saver because there is no place in town that sells the ink cartridges that my old printer uses. I was desperate!! Thank you again for having a very useful video to help us out. 😃👍
You're welcome! Glad you enjoyed the video!
Thank you! My red wasn't coming out either. Just a few blows directly on the red hole and the red came out!
Thank you so much :)
My printer sit unused for almost 2 years. Just before i replace the catridge, i saw your video and follow the instruction. It worked, instuctions is simple and very easy to follow. Thanks for uploading this video. God bless you.
Great to hear! Be sure to share the video link on social networking sites, and check out my wide range of helpful/educational videos. Thanks
Wow! After hours of troubleshooting and close to 20 Diagnostic pages printed, my red is finally printing!! Thank you!! My blue now has some streaks but the main problem was resolved haha!
Glad it helped!
Wow, now I have the same problem with my black ink. And then I vaguely remembered this video and I'm so glad I've found it! Time for this video to work its magic and save me again!
And it did! 🤩
Can confirm, my black ink cartridge on my Canon Pixma MX492 printer was clogged, tried this and it worked! Didn't have to blow into it, just soaking the print head in hot water did the trick. Thanks for the video!
Did a black cartridge and this works great. soak printhead in isopropyl alcohol for a day. open main front hole in top of cartridge. Make sure other holes are covered tight. put a air blower attachment on a air compressor or just use a canned air container from walmart. Aim the cartridge bottom away from u in the garage. Hold the air compressor air tool about 10" from the open hole. set pressure low on the compressor. make sure your thumb is on top of the plugged holes on the cartridge!! Aim at the open hole and blow for a few seconds. Clean the exterior very good. Fill cartridge, tape all holes with tape.
I was at wits end trying all the stuff recommended by the manufacturer with no luck. Thank you for the simple solution. My printer is now printing properly.
Perfect, thank you so much. Blowing through a straw worked! A pity I didn't come across this tip before. I've spent days soaking my cartridges to no avail. I got so desperate that today I ordered new HP cartridges (which I can now return for a refund). I have been refilling cartridges for years using good quality ink and a syringe.
DOES ANYONE KNOW THE BEST INK TO REFILL A KODAK 3250 PRINTER CARTRIDGE?
works like wonder!!! Just went to repair shop and was told to leave $100 for deposit and inspection, will contact in two days. If I don't want to fix it, they give me $40 refund, if i decide to fix, i need to pay whatever the problem costs. I could have used $60 to buy another one or two printers!!! This video literally saves my printer. Thx!!!!
Can't believe it but I've got a working printer now. Had an HP 3630 that I'd had in the box for a few years unopened. Has the 63 HP cartridges. When I tried to use it the first time, black was completely dried out and the color was about 60% dried with just blue and yellow coming out on test prints. Did your technique --with the color, soaked a couple of times then peeled back label and blew into hole with a straw--that got magenta going and it was good to go. The black took several soakings and a few straw applications but I eventually got it going. I had really thought that I wouldn't be able to get decent print from the black but I knew there was wet ink at the top of the pad. On the final soak of the black cartridge (25 minutes) I did see black ink floating around in the container so I thought maybe I had finally unclogged it. Then did one more straw application and I guess I had pushed enough ink down towards the bottom of it to get it operating normally. Result: The color output is near perfect and the black is about 90% OK with some faded print on the edges in places and some lines. But usable for sure and saved me 60 bucks. I think your comment that you had never not been able to get one of these going made me persist beyond what I normally would have. Mega-thanks for your video!!
This comment here is the best video 'review' ever
I tried a lot of TH-cam hacks , and one that advised to use soapy dishwasher liquid water, but none mentioned warm water. I did the hot to touch water fix, no soap, soaked for 10 minutes and it is printing as good as new. Thank you and God bless.
Never in my life I thought I had be troubleshooting ink cartridges lol
Life saver!! Needed ink for a church service, and the cartridge didn’t get shipped in time. This brought our cartridge back to a workable state until the new one comes. Might I add we hadn’t used this cartridge since pre-pandemic.
Thank you so much!! Five minutes of soaking and some mouth-to-mouth (was too impatient to find some tubing) and my cartridge is working like a charm!
One more subscriber from me, you saved me brother I was about to buy a new printer because my printer doesn’t print magenta color, thanks again and again, never enough to say thank you to you,God bless you and all of your family 🎉❤
Great video that works. Had color HP 60 cartridge that sat unused in the printer for a long time. Took effort between what you show here and also cleaning the electrical strip with rubbing alcohol, before I finally got it to print out all three colors. Really worth the effort considering how much these cartridges cost. I first had to refill the cartridge with ink before I realized the ink had dried out in the jets holes. Thanks for the great tutorial.
I tried and followed your instructions and it worked. It unclogged all of my blocked cartridges and they are all working again now.
I find for me using this way works much better than having to buy an online inkjet flushout liquid using a syringe. Thanks for your video, as it really works for me anyway.
Just coloured or black too?
I wasn't able to get enough pressure with a syringe, so I used compressed air. Worked perfectly for two clogged cartridges! Thank you
Glad it helped Amy! Be sure to share the video link with others. Thank you
works like magic! The first step didn't work so i tried blowing it without the tube. just use my mouth but with a tissue to prevent from getting the ink on my lips.. and now my cartridge works fine...thank you!
Great to hear!
This worked like a charm!! Didn’t have the rubber tube but a plastic drinking straw worked just fine!!! Thanks man!!!
Great to hear! I have many great videos on my channel covering many different subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share. Thanks
I have probably thrown away hundreds of dollars worth of cartridges due to a clogged color, not knowing that I could fix them. I left my HP printer for sitting too long I suppose, and my magenta dried up. I went through these steps and it fixed my cartridge. Thank you so much!
It doesn't always work, but I'm glad it worked for you! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making any purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you, and stay safe!
th-cam.com/users/electronicsnmoreplaylists
This video saved my life and my printer's life, as I was almost ready to start hacking it to pieces I was so frustrated
LOL. Thanks for watching! Be sure to share.
My cartridge was not printing Magenta and using the water soak worked beautifully... now all the colors are working... thank you!
Glad I could help!
Thank you!!! I thought I had to throw away my ink cartridge. It was new. Gave it a try with warm water and then with a straw. Worked like a charm.
worked like magic. was in the habit of buying new printers everytime am done with the re-re-re-re-filled cartridge. now I have 2 working printers!
Great to hear! Be sure to share my channel with others. Thanks
Thanks a lot man! I've done a lot of computer repair but I havent had much experience with printers and these ink cartridges seem to me to be a very inefficient design as well as a money racket. Your method worked for me, thanks again!
Great to hear!
My printer had been stored away for three years because of covid-19. I thought it would be pretty hopeless but you saved the day so I didn't need to buy new black or colour printer ink. Thank you very much!
Kudos on your tutorial! I was about to head out to Walmart, but have saved on the trip and cartridge purchase, especially during this quarantine time where going out of the house is risky business.
Great to hear Juan! Be sure to share the video link on social networking sites. Thank you
This man is legend, I lost hours and hours trying everything and finally this gentleman helped me. thank you Boss
Great to hear the video helped! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks
th-cam.com/users/electronicsnmoreplaylists
Pretty good info. Definitely worth trying before buying another cartridge. Epson printheads are built into the printer...they are not removable. Also, only use distilled water. The minerals in tap water can cause the inks to seize (especially black inks) and solidify in the printheads. Be sure to dry all the water on and behind the flex circuit, as that can cause a short and make your cartridge unrecognizable in the printer.
It works a most of the time, but not all. Sometimes the ink cartridge is too far gone. Thanks for watching!
For a Canon PIXMA which like Epson has the nozzles on the printer itself I rubbed qtips with alcohol on the nozzles then a dry rub to soak up excess alcohol and ink and it worked again.
You're great! Many thanks. Don't worry if your print cartridge print head gets clogged. As you suggested: don't throw it away. Use this simple uncomplicated method. It worked first time. A perfect video and I like your beautiful English.
Glad you liked the video, and thanks for the nice comment! Be sure to rate thumbs up and share my YT channel with many others.
Thanks a bundle mate. Pushing air though the ink chamber was the ticket for me.
Quick soak and then blew it and all working perfectly again! You just saved me £50. Thanks again.
(I had nothing to seal on the air intakes so I just wrapped my lips round the thing lol)
Sorry I took so long to reply back. I just saw your comment. Glad to hear it worked doing it your way. :-)
electronicsNmore is that from a artisan inkjet
Since then I found a EASY way to seal a syringe into one of the holes. Wrap electricity tape around the tip of the refill needle and twist it into the hole and sharply push the plunger down and it'l work perfect.
No
no what? =/
Thank you. I tried cleaning the print head before watching this video and printed a blank page. These are basically brand-new cartridges, but they're rarely used. It's been at least 6 months since I last printed something, and likely over a year.
After soaking both print heads in water for about 30 minutes they're printing beautifully.
Great to hear! Be sure to rate thumbs up, check out my video playlists, and share my channel with others. Thanks
Thanks! This is one awesome trick :) I used the tube part from a pen to blow air in the chamber since I couldn't find a tube quickly.
i've been trying to fix this all day,yours worked straight away so simple,thank you saved me $80,I did'nt follow your method exactly could'nt find any plastic hose,used the syringe and placed over hole.
This does work.I have been in the audio and vid electronics repair for decades.Also pretty much any other thing as well.I spent years to master mind my printer because ink was just so darn high priced for paper that I burned off in one day.I been down the road with ink cartridges and all else.Unclogging as well, refills takes alot of Patience.It can be screwed up easy.Hot water and steam so to say brings out the ink.If it does not, do not skip step because it will help in the next steps.I have and use syringes without needle.Just plunger and the end of it is custom to fit hole I need and secure tight.I also long ago avoided newer printers.Of which are harder to crack or refill.Also contain like 4 or more darn cartridges.Still on my 90's 1 cartridge printer lol.
Dude, you're a genius and a life saver. The YELLOW in my HP Tricolor ink cartridge was clogged. Red & Blue worked perfectly. Watched 2 other vids and their solutions didn't work. Although HP cartridges are a little different than yours, I peeled back the sticker & found the yellow hole and used the straw from my WD40 can and blew gently and the yellow became unclogged. For some reason my red got clogged so I blew in that hole and I was back in business. Thanks so much!!!
Great to hear! Please return the favor by sharing my channel with many others. Also check out my "Useful Tips" video playlist below. Thank you
th-cam.com/video/I9dEwqAM2ws/w-d-xo.html
This worked for me too!!! Great work, man!I used this technique with the very expensive printheads for Deskjet GT 5820.I saved $100 from not having to buy new set of black and tri-color printheads which HP recommends whenever you have printing issues.
Glad my video helped you! Please return the favor by watching my other videos, rating thumbs up, and sharing my channel with others. Thanks
Wanted to thank you. Have not used couple months printer said near full. I took out cleaned off. Tried to print about 3 times, nothing. Tried paper towel nothing came out. Put in warm water about 3 to 5 minutes. Wiped off and set in printer worked great? An easy fix saved me trip to store on weekend. So thanks.
I think, after 5 years, this is still one of the best videos on TH-cam
Thanks for the nice comment! 😀 Sharing the video link with others would be greatly appreciated.
yes
Thank you, you have just saved me £15 GBP, I was going to buy a new HP 304 cartridge. You're a star!
awesome!!! i just did this but i used a little plastic bottle (left over from a hair colouring kit, the kind that has a very small tip) i used to blow air into each hole, worked perfect!! thanks
Erith Gutierrez Great to hear! Be sure to rate thumbs up and share my channel with others.
I'm so happy that your method of soaking it in warm water, worked! First time, no problems!! Thank you so much!
Great to hear Amy! Also look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thank you
th-cam.com/users/electronicsnmoreplaylists
You sir, are a scholar. Thank you so much for those clear and helpful instructions, seriously man, I was about to go crazy. I just got a Deskjet 2541 AIO that hasn't been touched in probably 2 years, but had full cartridges, still wasn't printing pages, but by your instructions I was able to get it to print! It only took doing your steps about 3 times, but it's runnin' like a beaut now!! Thank you! Much love!
you are a printer saver! I watched so many different videos and your technique SAVED me the worlds biggest headache. THANK YOU!!!!!!
Glad I could help!
Oh my gosh this worked for me! Thanks so much man! I had to end up using the tube to unclog it but now it's printing like a dream. I just refilled it myself for the first time and fixed it, i feel accomplished lmao 😂
Glad I could help! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks
th-cam.com/users/electronicsnmoreplaylists
@@electronicsNmore ok thanks!
Many thanks, saved me a lot of headache. My black was on the fritz and the air pressure method fixed it right away. I was just about to toss the printer! I never would have found the ink port under the sticker without this video. Thanks again!
Great to hear! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you Greg
th-cam.com/users/electronicsnmoreplaylists
Best video out of the dozens I have watched on this subject. Thanks a lot.🙏🏼👍🏻
Glad to hear that! You're welcome. Be sure to look over my extensive video playlists below for other helpful/very informative videos of interest to you, and most importantly share my channel with many others. Thank you
th-cam.com/users/electronicsnmoreplaylists
Thank you! I just soaked the clogged cartridges in hot water for a minute and the problem was solved. No alcohol. Just filtered, boiled water.
Thank you very much! I was just about to toss out a set of dried cartridges, I actually have new set installed, which works fine, but I'll need that too for converting it to an all black set of cartridges for better result in my PCB making process... :) I've figured out that in order to get black enough traces for blocking UV light I need to print the image in high resolution photo settings, on paper or film, but in high resolution photo mode the black color is actually not black since it's mixed of all 4 colors, which makes a litle bit greenish, which doesn't exactly blocks UV light... If I print it using high resolution photo settigns, but I take out the color cartridge it is black, but still transparent since it doesn't gets enough ink pomped into the paper. The best result I've got was with both black and color cartridges all compartment filled with black ink, but once I've converted the color cartridge to black, I was able to print 0.008" lines, but I was unable to print color images. I hope that won't be the case now. :)
RPBCACUEAIIBH njioi899
Thank you so much! I've been working on fixing my printer for a couple of months. I've watched so many videos & couldn't figure out how to fix it. This was such an easy fix I couldn't believe it. I really appreciate you taking the time to make the video to help so many of us fighting with our printers. I am guilty of tossing printers out in the past. I will forever be thankful.
Holy shit thank you!!!! I’ve been trying to get my printer to work for over an hour now!! This worked like a gem, thank you
Great to hear Ben! Be sure to share my channel with many others, and look over my extensive video playlists below for many other videos of interest to you. Thanks
th-cam.com/users/electronicsnmoreplaylists
Thanks so much for this. I had an urgent print job and the cyan (blue) on my new (but out of date) genuine HP 78 tri-colour cartridge was blocked. Soaking in warm water didn't help so I tried the blow-through method. I had to drill a small hole through the filler plug in the top of the cartridge to reach the cyan tank, as there was no other way in. I used a straw to blow through the hole and hey presto! Cyan ink appeared in the bowl! I dried off the cartridge, put some sticky tape over the hole, installed the cartridge and printed off twenty perfect colour pages. Couldn't have done it without you!
Glad my video helped you. :-) Be sure to share my channel with others, rate thumbs up, and check out my video playlists. Thanks!
works very good...Didn't have a plastic tube so I used a straw..Thank you very much
+John S JaSå! I wondered about that! So much handier than having to locate and purchase some kind of rubber tube! ಥ‿ಥ
John S I
Worked perfectly, left mine in for 15 minutes and now printing again, thanks.
The water thing didn't work for me but when I blew with a straw it was unclogged completely! Thank you.
Same here. I was in disbelief that it worked because every other method I tried failed.
I did a refill yesterday and tried it today and got yellowish purple and yellow colors only from the color cartridge, saw your video and did exactly what you said and bingoooo it works now like charm, thank you so much that was really helpful.
Glad to hear my video was helpful! Be sure to check out my "Useful Tips" video playlists, rate thumbs up, and share my channel with friends. Thanks
Thanks you so much , such an informative and easy video ! I’ve watched several videos to fix this issue , couldn’t imagine it was this simple with instructions ! 👍
Glad it helped!
Need this tonight. Can't believe this worked just as shown. Nice. Thank you!
Thanks man this works
I did it with my black ink and it worked
Thanks again
Great to hear! I have many helpful and highly interesting videos on my channel that cover a wide range of subjects, so be sure to look over my video playlists below and most importantly share my channel with many others. Thanks
th-cam.com/users/electronicsnmoreplaylists
@@electronicsNmore definitely
Thank you for this video. I have a tool called a snap and vac from an after market bulk ink supplier- but the down side is it sucks out all the colors and not just the one that is clogged. In my case- I was getting yellow only briefly after cleaning. I used a little piece of small engine fuel line tubing that works perfectly. My cartridge was so clogged, I had to do this several times, but finally the yellow was completely clear- so clear that it put the blue and red to shame! Both of these are more of a purple and maroon, so my guess is that both of these heads are only partially clogged, so I will now do the tube method on each of these until they improve. Thanks again for taking the time to put this video out, and assisting us thrifty printer re-fillers!
Thanks for watching! Be sure to share the link to this video on other websites.
It seems that when I need a new ink cartridge, they are out, so when I see them in stock, I pick up one to have as a spare. Put a new black in that I had as a spare and won't print. Ran the print head clear way too many times (wasted a lot of color because the color cartridge was printing fine), nothing. Finally thought to check TH-cam and came across this video. Literally two minutes of a warm water soak and it is printing as if nothing was ever wrong. THANK YOU!!
This is a good video! I wanna suggest the use of a seringe if no tube available.
I've stop using ink a long time ago, it's too costy for me. I hear that companies manage to make 90 K dollars with 1 gallon of ink and then some.
Thank you so much for your video. I was getting so frustrated with my printer.
Glad I could help! Be sure to share my wide range of videos with others. Thanks
Your blowing in the holes did the trick! Thank you so much! You were the third video I had to try until I had a successful result!
Its always the friggin blue nozzle lol.
maaaaannnnn.....I have no words that will be enough to show my gratitude to you. I was extremely worried about my printer and this technique has just proved to be a miracle. Loads of love and prayers for you. Stay happy and keep making such magical movies....😍😍💕💖
Glad the video was able to help! Be sure to share. Thank you!
Anything to avoid buying from printer companies, the price they sell ink is a RIPOFF, a STEAL.... I buy a printer that will accept easy refills, for most the work I perform with printers, even lower grade ink will do...
At $20 - 30 per quart for cheaper, and $30 - 50 for excellent quality, you can save a bundle, knowing that most cartridges use about 4 to 8 ml. of ink and sell it for $25.
I simply hate to be taken hostage that way......!!!!!!
I bought a 3rd party cartridge and that's the reason my printer is now screwed. I'm a techsavvy, and probably out of luck.
Wherever you are right now, may your life be blessed always...You saved me! There is no way i can find a new ink in the middle of the night, i am thankful to find your video tonight. the blow technique worked like charm. thank you dear sir
Thank you very much, it is really a helpful video.
Glad my video helped you. Be sure to share my channel with others, subscribe, and rate thumbs up. Thanks!
When my HP printer utility indicated my black cartridge was 80 percent full I was about to toss it out until I found your video and 10 minutes later it printed like a charm! Thanks!
Be sure to rate thumbs up, share my channel with others, and check out my "Useful Tips" video playlist for other great videos of interest to you. Thanks!
I tried another cartridge. It had no ports or even a mark where to drill, so I just decided to suck on it :D That worked too, save for the mouthful of ink.
Mikko Tamminen has
Thank you!!! Got my black ink cartridge unclogged with your help.
You are my human !!!!! thank you so much. I felt so hopeless.
Glad my video was helpful. Be sure to share my channel with othrrs, and rate thumbs up. Thanks!
Thank you! My HP printer was not dispensing magenta ink and I tried soaking the printhead in water many many times. Blowing into the tube is what finally fixed it!
Thaaaaanx a lot, that worked very well..you don't know how much you've helped me❤
You're welcome. Be sure to look over my extensive video playlists below for other helpful/very informative videos of interest to you, and most importantly share my channel with many others. Thanks
th-cam.com/users/electronicsnmoreplaylists
Nice, thanks for the info. I dipped the ink jet head in hot-warm water and blew out some ink and it's working again. Much appreciated!
This method works wonders. Next I tried the same with an ultrasonic cleaner and that was even better.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
It was hard to find what the problem was but once I figured out that it's the cartridge, this did the trick to clean it. Thanks
if you want to get technical cyan and magenta lol i say blue and red also nothing wrong with that gr8 vid :D
Thanks that worked great, the only thing i would add is since a badly clogged cartidge might not print perfect after the cleaning people should open a word document and insert several shapes filled with the color they are trying to unclog and print several prints untill its perfect ! Thank you again it worked perfect!
From my experience, just don't buy a HP printer....
Yes, they're troublesome, and the ink is more of a rip-off than other manufacturers. Thanks for watching! Be sure to share the video link with others.
@@electronicsNmore what are the best but cheapest printer for document printing only? thanks
@@ernjastia3854 I have a 50 dollar used HP deskjet 450 portable printer that I've been using for years with cheap ink. No problems at all.
HP specialises in making printers that stop working in 3 months. Never going to buy HP again in life
Always pay the $10 to get the 3 year warranty if buying via Amazon
DAMN... thank you so much! I was about to give up after multiple tries on cleaning the nozzles, and was about to throw my cartridge in the trash!
The blowing into the hole using a pipe worked like a charm!
aha.......thankssssss
YES! i know its an old video but i tried it after watching and trying about 10 other videos on youtube. THIS ONE WORKED! :)
Better solution is to not buy HP in the first place. I think HP stands for High Prices!
Most ink cartridges are a big rip off, but HP gets the award.
But there is at least one good thing about them:
Their driver support ist EXCELLENT! My 25 year old printer has STILL drivers for Windows 10! And also my HP PSC1410 works quite well with Windows 7. Also they have very good Linux support.
So I think this is quite good, other companies force you to buy a new printer that way.
But I have switched to a laser printer, bought a used Brother HL6050 for 20€, thats less than a color cartridge for my HP DJ 3050
Great buddy. It worked by simply blowing air in the cartridge. You are a genius. Thanks once again.
Glad it helped! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you
th-cam.com/users/electronicsnmoreplaylists
Some posts say use alcohol or Windex to soak the print head,, that is not a good idea because these chemicals corrode the head and contact pins. I just soaked the head in warm water for 15 minutes, added fresh ink , it did the trick. Thank you for the post.
Thanks for watching! Be sure to share.
Enjoy your educating vids. Never been disappointed. Thanks. :)