BMW F10/F11 Diesel Fuel Filter Replacement DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2025

ความคิดเห็น • 30

  • @PonderingOne
    @PonderingOne ปีที่แล้ว +5

    Francesco, thank you for sharing your information with us. This is another helpful video.
    I respectfully suggest that you use jack stands when working under your car. The hydraulics in the floor jack can fail, which would injure you badly or possibly kill you. Please be safe!

  • @skreech01
    @skreech01 10 ชั่วโมงที่ผ่านมา

    Where did you got the ISTA ?

  • @Stefano_C_Pli
    @Stefano_C_Pli ปีที่แล้ว +1

    Ciao. Volevo chiederti se è possibile cambiare il filtro senza usare la diagnosi oppure se serve per forza usarla per attivare la pompa del gasolio per fare il riempimento del filtro?

  • @bazforbes8545
    @bazforbes8545 2 หลายเดือนก่อน

    Good afternoon. I carried out the fuel filter change on an F11 520d without realising that there was procedure for bleeding... I did 10 ignition cycles and tried to start, nothing. Looking online and saw all the info about the bleed procedure.
    The correct bleed procedure has now been carried out twice but the car still won't start.
    The first time the bleed was carried out you could hear the air and fuel being purged through. No air sounds on the second run.
    Any info or advice would be much appreciated. Cheers.

  • @br0leg274
    @br0leg274 2 ปีที่แล้ว +1

    Hello Francesco , could you tell me which type of Car-jack you are using?
    I own also a 530d xDrive and do the most service stuff on my own, but due to Corona my workshop closed and I need to these things on the street.

  • @alessiopaganelli
    @alessiopaganelli ปีที่แล้ว +2

    Ciao ho visto il video, volevo sapere se è possibile sostituire il filtro senza usare il PC per la procedura di svuotamento aria, grazie

    • @SchemAytas-te7st
      @SchemAytas-te7st 8 หลายเดือนก่อน

      No your hpfp will be smoked after crank the car without bleed the system

  • @HamzaGuzel690
    @HamzaGuzel690 5 หลายเดือนก่อน

    OBDeleven just added a fuel priming app for this car. Is that pretty much the same thing? Is that safe? It only does it for 30 seconds

  • @nailgafarov236
    @nailgafarov236 2 ปีที่แล้ว

    I replace it last year, run ista procedure for remove air during procedure I hear pump and stream into filter, but car start from 3rd attempt. On next day same 3rd attempt for start. But after I dont have any problems. Why bleeding didnt remove air? Maybe High pressure pump issue?

  • @mirkomz
    @mirkomz 2 ปีที่แล้ว +2

    God job 👍 Is it possible do this maintance without Ista use?

    • @phoenixosprey7455
      @phoenixosprey7455 2 ปีที่แล้ว +1

      Yes but you risking the CR pump running on air.

    • @mihaicaliman1867
      @mihaicaliman1867 2 ปีที่แล้ว +5

      Yes you can , I have done it for 3 times without the ISTA , make sure you clamp end of the hose , even if you forgot about that it's fine the car will start a bit slower . What you can do ... Put ignition on for couple of times and then start the car and enjoy your ride!

    • @seanmccarthy407
      @seanmccarthy407 ปีที่แล้ว

      Some scan tools also have a 3min low pressure pump run programme prior to start to remove any air I recommend you get one of these for fault codes and battery replacement too

  • @Junglefever71
    @Junglefever71 2 ปีที่แล้ว +2

    Nice job. Can i ask where you got Ista+ from? I have an F11would like this software. Thanks

    • @paulroman7587
      @paulroman7587 ปีที่แล้ว

      Yes , that will help us a lot, If somebody will explain how to install ista+

  • @vilimyllykangas1027
    @vilimyllykangas1027 2 ปีที่แล้ว

    Can you make a video how to change serpentine belt

  • @dinhvanpham8102
    @dinhvanpham8102 9 หลายเดือนก่อน

    Hi, Thank you very much for another fantastic video. Your videos are the best👍 Can I ask where you got Ista+ from? I have an F11would like this software.

  • @paulroman7587
    @paulroman7587 ปีที่แล้ว

    This is great job and well explained, thanks!

  • @DaddysPlay
    @DaddysPlay 2 ปีที่แล้ว +1

    Without ISTA, I try to start engine. after no push the brake and start key on & off 4~5 times. There's no problem driving my car. I upload my youtube this processing. thks^^

    • @marianogambardella668
      @marianogambardella668 2 ปีที่แล้ว +2

      Please, do not try to start the engine without performing a bleeding procedure. This can cause high pressure fuel pump damage.

    • @DaddysPlay
      @DaddysPlay 2 ปีที่แล้ว +2

      @@marianogambardella668 Yes, you're right. I'll perform bleed air procedure next time. 😊

    • @dpayne8611
      @dpayne8611 ปีที่แล้ว +1

      @@marianogambardella668Not even the BMW mechanic does it, they just fill back the fuel and starts it.

  • @HNZKFK
    @HNZKFK 10 หลายเดือนก่อน

    Thanks for video, ista works good

  • @DefJamDead
    @DefJamDead ปีที่แล้ว

    Nice tutorial, thank you

  • @lerafessayeur9111
    @lerafessayeur9111 2 ปีที่แล้ว

    Bonne vidéo 👍.

  • @adigerlaprasad5348
    @adigerlaprasad5348 2 ปีที่แล้ว

    Nice video sir🙏🙏🙏🇮🇳

  • @nonickname99eking45
    @nonickname99eking45 2 ปีที่แล้ว

    hello brother i saw your videos and i work with bmw cars programmer and i like to work with you if we can chat together or if you have an insta page