People have been asking for a list of what I used to mod this helmet so here you go! Superglue Car body filler (easily sandable stuff) Milliput Polypropelene plastic sheet (from ebay) Hot glue Medium and fine grit sandpaper Fine grit ‘wet and dry’ sandpaper Automotive painters masking tape White plastic primer White and red spray paints Grey and black enamel paint Mirrored window tint And packing foam for the inside of the helmet. The materials for the rangefinder are small strip of wood, polypropelene plastic sheet and some spare EVA foam
Commander Fox yes I understand this I’m a little young to know about that but I still know because when I was younger they were just taking the full helmet off of the shelves and replacing them with the shitty masks
I have the red shock trooper version that had the flashlight and the red diamond on the forehead of it. I'm doing this mod as soon as I go to Lowes or Ace hardware, because I'm gonna do a few things differently and they have the materials anyhoo
pro tip when applying vinyl or film like the reflective visor vinyl use a 80/20 mix of water and dish sosp and spray lightly on the surface you are applying the vinyl this allows the viny to "float" and you can easily push air bubbles and creases out to the edge the water will evaporate leaving you with a perfect result cheers
But alot of people think that it would ruin immersion with rainbow colors of troops running around the battlefield. Like all the legions are together 501st, 212th, 91st, etc.....
Looks much better 👌 a suggestion, when removing masking tape, peel it backwards, not pull it away, it is less likely to lift the paint off the surface 😎
@@nickmontage1127 I think he was referring as to a joke, Since in the original trilogy's stormtroopers SUCK at aiming, Or maybe I'm retarded. Who knows?
Nice conversion. Also fun fact, Captain Rex’s helmet is a hybrid of phase 1 and phase 2 clone helmets. He also did it with his body armor, I’m guessing because phase 1 was very strong but really clunky and phase 2 was protective in certain areas, but really ergonomic.
Thanks for posting this! I’ve gotten a good start on a mod of my own, but the way you did your visor looks a ton easier than how I was planning on doing mine.
Great work Ace, love the finish you acheived. However, I really wish I hadn't seen this vid, because now I'm going to have to get my partialy finished Hasbro Clone trooper helmet out and get it finished, dang you Ace, LOL!
Well done. I got to thinking of you the other day while I was dusting off and boxing up some of my custom LEGO sets, remembering the influence your OT Stormtrooper armour paint scheme seems to have had in the designing of one of the LEGO Stormtrooper minifigures. Hadn't subscribed to your channel and couldn't remember your screen name. Then this afternoon, while scrolling through videos on TH-cam's home screen I saw you name, watched this video and have subscribed. The Force is with you.
I have taken a year to track down a complete set of these for a "wall Display in my (soon to be) projection home cinema with my black series helmets, and I must admit yours looks good with the smaller eye slits.
Not first. Also I'm going to be Kylo Ren for Halloween, and cosplay as him to all my conventions. Could you make a video with tips to make a screen accurate Kylo Ren? That last part cracked me up.
Really cool! Two things I would have done differently: use the magnets to keep the cap on when you're not using the range finder and use CA glue to hold the plastic on the visor.
Ok sooo i have 2 of these helmets that were given to me back in 08, but due to the back ground music in this video i wasnt sure if i should start dancing or crafting :/
Amazing Design i remember getting one of those helmets as a kid back in 2009 as a gift for Christmas. I love the art you put into the helmet realy fascinating, keep up your great work!
Sigma Maverick That is true but Stormtroopers are mostly recognised as recruited soldiers. The Clones that did transfer did not live much longer. Also, the Pop culture image of a Stormtrooper isn't one of a clone inside the armour.
After all the years i still have the helmet standing on the left side of my pc. I distinctly remember me cutting out some paper to first make the visor look more like a actuall phase 1 and after watching episode 3 for the first time into a phase 2. always hated the original look and everytime i saw the helmet it bothered me. But now that i've seen this video im gonna make my childhood dream of this being a proper helmet come true. Thank you
Not only am I envious of your skills to be able to make something like this happen BUT your hair... It's perfect *_OwO_* ps: You could add like a sketch/quote to the side of the helmet, to make it more personal just like some of the clone troopers.
Friend of mine picked one of these up at a garage sale for me awhile back and i've always wanted to do something like this, great work and great video!
I own the captain Rex version, it has scratches everywhere from when I was a kid, used it a lot, it looks like it was in an actual battle, which makes it look more cool
My question is do you take commissions ? Haha i kid ... just a couple of things i need made clear -what did you reinforce the helmet parts with -what is wet and dry ? Thanks in advance :-)
just bought one on ebay for about $50 with shipping. I never had it as a kid, but I really want to paint it like the 332nd in the 7th season of clone wars
NCIS shirt, Mario pants, Star Wars cosplay, not to mention I've been going by the callsign Ace ever since I was the Emperor's Eyes of the Secret Order of the Emperor in TIE Fighter - I definitely sense a kindred spirit. Subscribing for sure!
One thing I've wondered is, what's up with the red light on the back of the fin? Is it for other troopers behind to see each other or something?.. or is it just for aesthetics? Because I've seen the light on in the Battlefront 2 trailer..
"This helmet is so pretty, even my poster of Director Krennic has fainted!" I absolutely lost it! Hilarious! Awesome job on the helmet! I've wanted to do a Fordo for a long time!
I have 4 screen accurate clone helmets, which are worth about 4-5 thousand all together. One is of one 400 ever made by EFX in 2007. Hate the crappy empire, long live the REPUBLIC!!!!
REPUBLIC REBORN I have a Boba Fett helmet that was fast in Germany, ive only ever seen the one I have so there aren't too many in the US. It was $90 and looks like it was hand painted
Thank God I bought one of those when they just came out during the first seasons of the clone wars, I still have it in my room cause it's that good. Today they would never make a toy helmet with that quality and detail.
People have been asking for a list of what I used to mod this helmet so here you go!
Superglue
Car body filler (easily sandable stuff)
Milliput
Polypropelene plastic sheet (from ebay)
Hot glue
Medium and fine grit sandpaper
Fine grit ‘wet and dry’ sandpaper
Automotive painters masking tape
White plastic primer
White and red spray paints
Grey and black enamel paint
Mirrored window tint
And packing foam for the inside of the helmet.
The materials for the rangefinder are small strip of wood, polypropelene plastic sheet and some spare EVA foam
What is the approximate price for all the things you need?
when you are older, join you to us... the 501!
Ace Cosplay Nerd in me needs to point out that since it's a Phase 1 helmet, red denotes rank not division. (Red means captain btw)
I ended up paying about 90€ for materials
Ace Cosplay what was the thickness of the polypropylene sheet?
Good thing the visibility is alright, so you can still WATCH THOSE WRIST ROCKETS!
wrong legion dude
lmfao
Lmao
Lets hope she can see if The Sector is Clear.
HellHound NOT CLEAR NOT CLEAR
just like the simulations
Watch those wrist rockets
We've lost a command post
Super battle droid take it down!
Set 'em up and knock 'em down!
They've sent in the supers
I miss when they made full helmets now they just Sell shity masks
Commander Fox so true
Commander Fox yes I understand this I’m a little young to know about that but I still know because when I was younger they were just taking the full helmet off of the shelves and replacing them with the shitty masks
Yes but, NOW THERES BLACK SERIES!!!!
Yeah and they are cheap plastic
At least we do have the black series helmets, when Hasbro will wake up and make clone helmets I don't know. They would sell.
See being a New Zealand i don't need a voice changer i already have the Jango Fett accent
HAHAHHA
More like the Waititi/Korg accent.
Oh you're subscribed to tagbacktv too!
Would "accent" be pronounced "hixent" for you? So cool.
You and me both Kiwi boy
My mum never bought one for me when they where in stores. She said that I already have one
She was referring to a bloody paper mask
Bro...
That's dumb
And why was the mask bloody did you color it or what
StrangePerson12 Gaming I think he means “bloody” as in damn
StrangePerson12 Gaming British slang
Bruh
the actual kaminoan armorsmith
x)
Ooof
This showed up in my recommended 2 years after upload
A surprise to be sure, but a welcome one
Same thing but itsnt like old now
When a recommended pops up that you actually want to watch "hello there"
Yep happened to me as well a little later but it still happened to me
Fuck those Large-Ass Hasbro Visors. The less you can see, the more accurate it is :)
Glad you fixed it up real good!
Great work, man! WOOF WOOF
But Clones are REALLY GOOD shooters
CommanderWolffe i see u every where on youtube your videos are recommended for me there great vids btw but your every where
Well, you're not more accurate if you see less.
woof woof pmsl
CommanderWolffe I watch you all the time
i used to have this and wondered why the visor was so goddamn big
Zeus for little kids to see
Zeus I just found this vid and I was thinking the same thing along where my boba fett helmet just like this went fml
Damn! I actually have one of these helmets, literally all I want is to make the visor smaller. This is awesome!
Cardboard
wrong place for the word "literally". stay in school
GJL Creative Studios
No
I have the red shock trooper version that had the flashlight and the red diamond on the forehead of it. I'm doing this mod as soon as I go to Lowes or Ace hardware, because I'm gonna do a few things differently and they have the materials anyhoo
I have four different helmets, boba, death trooper, rex, and a red clone trooper helmet (don’t know the last one very well)
pro tip when applying vinyl or film like the reflective visor vinyl use a 80/20 mix of water and dish sosp and spray lightly on the surface you are applying the vinyl this allows the viny to "float" and you can easily push air bubbles and creases out to the edge the water will evaporate leaving you with a perfect result cheers
Who else wants this type of costimization in Battlefront 2
JustSomeGuy 666 and that's why Battlefront Elite Squadron is the best.
It's the Battlefront 3 we never had.
JustSomeGuy 666 haha I saw you before
JustSomeGuy 666 as long as i can be a 212th trooper, i dont really care lol
A customization menu has been datamined look it up :)
But alot of people think that it would ruin immersion with rainbow colors of troops running around the battlefield. Like all the legions are together 501st, 212th, 91st, etc.....
Looks much better 👌 a suggestion, when removing masking tape, peel it backwards, not pull it away, it is less likely to lift the paint off the surface 😎
thanks for the advice
Remove tape when the paint is wet for no paint lift.
can you elaborate more on peeling it backwards? Like roll it?
yes
ibasiclypwn yes
Safety warning always cut towards yourself ............. Wait a minute
Commander Lakar its always run with sharp objects....wait
Always try to die
Wait
Commander Lakar remember stick a fork and the electrical socket wait
In Soviet Russia , you don't cut blyat, blyat cuts yuo ))))
Always make sure the knife is near your fingers!..... Wait
Holy crap that's the coolest shit I've ever seen.
Hikari ও Phase 1 Helmets look pretty menacing
You need to get out more.
_When the helmet is in pieces_
"We're taking heavy fire!"
:D
You also have the Hasbro blaster!! It's such an Awesome blaster
Hey, boss lady. Do you eyeball and freehand everything? Impressive, most impressive...
Clint Williams most of the time :)
In-fucking-credible
I can't even nail a nail into a piece of wood without bending it
Sergio Flores ok then you are aiming wrong
@@jamescorrington7216 you don't have to be rude he was just showing respect to ace
@@nickmontage1127 I think he was referring as to a joke, Since in the original trilogy's stormtroopers SUCK at aiming, Or maybe I'm retarded. Who knows?
I'm buying one soon. I'm a major starwars fan. And I wish 100% accurate ones were affordable lol
This channel has inspired me to try and to repainting and such for myself. I don't have a lot of money, so I appreciate how practical these builds are
Kids run into lots of walls
The Wallalorian.
*Mandalorian* *Wall* *banging* *cover.*
Nice conversion. Also fun fact, Captain Rex’s helmet is a hybrid of phase 1 and phase 2 clone helmets. He also did it with his body armor, I’m guessing because phase 1 was very strong but really clunky and phase 2 was protective in certain areas, but really ergonomic.
nice mario pants.
Thanks for posting this! I’ve gotten a good start on a mod of my own, but the way you did your visor looks a ton easier than how I was planning on doing mine.
Secure your battery pack with adhesive velcro strips.
Amazing how a couple of pieces of plastic at the front can completely change the look of the helmet. Amazing work!
Great work Ace, love the finish you acheived. However, I really wish I hadn't seen this vid, because now I'm going to have to get my partialy finished Hasbro Clone trooper helmet out and get it finished, dang you Ace, LOL!
Teesixhundred I'm currently working on a mandalorian helmet from scratch, ugh, long term project lol
Just bought one of these bad boys and i’m looking to convert it into either w coruscant guard or 501st
Well done.
I got to thinking of you the other day while I was dusting off and boxing up some of my custom LEGO sets, remembering the influence your OT Stormtrooper armour paint scheme seems to have had in the designing of one of the LEGO Stormtrooper minifigures. Hadn't subscribed to your channel and couldn't remember your screen name. Then this afternoon, while scrolling through videos on TH-cam's home screen I saw you name, watched this video and have subscribed.
The Force is with you.
I have one of these!! It was a gift from my grandpa as a kid. Funnily enough, he also bought one for himself and painted it to look similar to yours!
Why am I just now finding this?? This is awesome
Boba Boy to be fair, it only came out a few weeks ago, lmao
they made a monster you made a masterpiece
the original looks more like the swtor republic trooper helmets
It's for kids not adult cosplay
@@hoohaa559 No where in my post did i say it did
@@hoohaa559 you stupid look at the words more like you can't read it clearly doesn't have adult cosplay in it stupid
Lol
If you did a full body build this would look so good!
Love this diy, i actually think i might diy this myself lol
I have taken a year to track down a complete set of these for a "wall Display in my (soon to be) projection home cinema with my black series helmets, and I must admit yours looks good with the smaller eye slits.
phase 1 armor is best armor
natureman494 Then you haven’t seen phase 2 armor it’s lit
Honestly I like the Phase 1 helmet much more but the actual Armour Phase 2 nails it
natureman494 ARC trooper phase 1.5 armour is the best
Phase 1 65th corousant guard
This is awesome! I love your wood flooring too, and i gotta peep that art in back.
Wore one of these in the clone wars ( Halloween )
Leaving the visor black would have been a bit better. But overall it looks really good
Not first.
Also I'm going to be Kylo Ren for Halloween, and cosplay as him to all my conventions. Could you make a video with tips to make a screen accurate Kylo Ren?
That last part cracked me up.
10 years ago I got 2 of these helmets and that was an awesome childhood its awesome how you change this helmet to look so clean great vid
God i need this
I used to have this toy as a kid, and you have brought back so many memories of my childhood that I forgot about hahah.
Dang I got captain Rex helmet at a thrift store 😂
wow im super impressed with what you did to modify that helmet
Amazing work girl! Congrats!
Girl!? I thought it was a teenage lad ? fuck I need to go the dentist.
ojl10 why the dentist? 😂
Caped _Crusade989 That's where you get hearing aids from... silly billy.
ojl10 oh my God, lmao
ojl10 wut
this helmet brings back so many memories (,:
I got bullied because of the visor ::::::::’)
Teenagers; The future of our people.
I can,t even imagine how much patience that even requiered Super thumbs up Ace Cosplay
Are you gonna make/get a captain fordo armor set? Also that's a pretty dang cool looking helmet
Really cool! Two things I would have done differently: use the magnets to keep the cap on when you're not using the range finder and use CA glue to hold the plastic on the visor.
Ok sooo i have 2 of these helmets that were given to me back in 08, but due to the back ground music in this video i wasnt sure if i should start dancing or crafting :/
Andre Montelongo why not both?
I think I might try this
Do you maybe have a link or recommendation on what kind of plastic you used to cover up some of the visor?
she used PP, I am guessing 2-3mm thick, but where I live that stuff is quite expensive for it's size. I guess you could use PE but I can't gurantee
He*
Realnyankidgaming nope, its she
@@yoamal1187
Sounds like a she
@@nsl_black8053 what's pp and pe?
Amazing Design i remember getting one of those helmets as a kid back in 2009 as a gift for Christmas. I love the art you put into the helmet realy fascinating, keep up your great work!
How do you learn to do this
hazardtrooper ! Make a deal with the devil.
Arts and crafts is probably a good start probably know I'm late but it's better than a smart ass answer
This was awesome. I love how clearly and thoughtfully you narrate the project.
Does your shirt say "cloned to be wild" with a picture of a fucking StormTrooper?
Fusi0nZ most of the stormtroopers were clones during early empire
Sigma Maverick That is true but Stormtroopers are mostly recognised as recruited soldiers. The Clones that did transfer did not live much longer. Also, the Pop culture image of a Stormtrooper isn't one of a clone inside the armour.
+Fusi0nZ Clones were phased out around 5 years before episode 4. For most of the empire's rule they had clones.
Fusi0nZ yes yes she is
Keep in mind a great handful of clones did die on the first death star! Probably wrong but makes sense to me!
Just came across this video because I’ve been stumped on how to get the range finder to rotate and stay in place. The magnets are such a good idea
0:42 thats why they miss all their shots
Phase 1 helms are and will always be the best looking helm in star wars period brilliant job you did.
So this is how they make the helmets for "Attack of the Clones" right?
Ryan Nguyen it’s all CGI in the movies
Sadly, all cgi clones in episodes 2 and 3
wADE just Commander Cody is not
@@leon-501st2 No, all of the clone armor shown in the movies were cgi
Just finished this. It actually makes quite a good tutorial. Now moving on to the body armour
I have that sitting in my closet. Dang
YaBoiRevan Same, but I've got the one with the rangefinder on it.
YaBoiRevan ya better get to work, my dude!
me too. I'm gonna do a conversion on mine this summer.
After all the years i still have the helmet standing on the left side of my pc. I distinctly remember me cutting out some paper to first make the visor look more like a actuall phase 1 and after watching episode 3 for the first time into a phase 2. always hated the original look and everytime i saw the helmet it bothered me. But now that i've seen this video im gonna make my childhood dream of this being a proper helmet come true.
Thank you
the scuffs are from battles lol
Looks like ARC-77's helmet from Star Wars Clone Wars (2002)! Good job man!
Where did you get the blaster rifle?
Star Commander it’s a dc15 blaster rifle that has been modified black.
Star Commander they sold them a couple years ago or something but she painted it black
Not only am I envious of your skills to be able to make something like this happen BUT your hair... It's perfect *_OwO_*
ps: You could add like a sketch/quote to the side of the helmet, to make it more personal just like some of the clone troopers.
Eternal Evening Shut the fuck up creepy ass loser
@@imafishbish1346 calm down my dude
The rangefinder is a little off.
I thought he escaped, or was that Legends?
Currently dead because of disney but disney will find a way to bring him back cause they would get rich off boba merchandise
True.
MINORASSASSIN bitch, he survived that! Before, he fell in 5 times, so sthu.
Friend of mine picked one of these up at a garage sale for me awhile back and i've always wanted to do something like this, great work and great video!
It looks so much like a epsode 2 clone
Linda Brewer thats the point sergeant
Linda Brewer bro it is
Captain fordo helmet
Amazing work! You made it look so much better! My largest complaint, same with the Boba Fett version, was the visor was too wide! Brilliant! :D
Your gun sounds are the ones for cannons not rifles
Tipsy Knight Your profile deserves to be framed
the gun came sounding like that
I own the captain Rex version, it has scratches everywhere from when I was a kid, used it a lot, it looks like it was in an actual battle, which makes it look more cool
I still have this Lol
Enjoyed the video a lot. Proud member of the Imperial Outlanders. I'm going to try and recreate the build as Captain Rex's phase II helmet.
The way thay could hit compared to storm troopers
The way you joke is so stupid
Gonna try to make a Clone Commander Ganch Helmet
Would this be 501st approved?
No, 501st/Vader's Fist have blue markings. This is an ARC Trooper helmet.
Slender Man No, I meant like the 501st trooping and costumeing organization. I know it's an ARC trooper helmet lol.
RIPGUTProduction It can be. There are specifications on the 501st website where this is allowed
Cosplay material very well done
Oooo where did you get the dc15a rifle 😮
iamsavinsky its an modified hasbro dc-15 that they used to sell a couple years back
HaloMotionStudios thanks dad
iamsavinsky you’re welcome, son.
NEOAVENIR *daddy
I'm pretty sure I saw this in the Haywards Heath BHF store. Glad to know it went to a better home than whatever I could have provided!
My question is do you take commissions ? Haha i kid ... just a couple of things i need made clear
-what did you reinforce the helmet parts with
-what is wet and dry ?
Thanks in advance :-)
Oh I know one of these :D wet and dry is basically a special type of sandpaper and it can be used wet or dry (hence the name).
just bought one on ebay for about $50 with shipping. I never had it as a kid, but I really want to paint it like the 332nd in the 7th season of clone wars
wow that was amazing......could i buy one of these from u lol
NCIS shirt, Mario pants, Star Wars cosplay, not to mention I've been going by the callsign Ace ever since I was the Emperor's Eyes of the Secret Order of the Emperor in TIE Fighter - I definitely sense a kindred spirit. Subscribing for sure!
One thing I've wondered is, what's up with the red light on the back of the fin? Is it for other troopers behind to see each other or something?.. or is it just for aesthetics? Because I've seen the light on in the Battlefront 2 trailer..
KrazyKat 03 I think it's a friend or foe kind of deal for covering fire and snipers
It's like reflective tape, prevents friendly fire from behind.
"This helmet is so pretty, even my poster of Director Krennic has fainted!"
I absolutely lost it! Hilarious!
Awesome job on the helmet! I've wanted to do a Fordo for a long time!
anyone else come here from recommended after watching to much William jakespear
medievalGamer Gamer nope
Well,it can stay white if you want like a 501st template on it,love the transformation so keep up the amazing work!
I have 4 screen accurate clone helmets, which are worth about 4-5 thousand all together. One is of one 400 ever made by EFX in 2007. Hate the crappy empire, long live the REPUBLIC!!!!
REPUBLIC REBORN I have a Boba Fett helmet that was fast in Germany, ive only ever seen the one I have so there aren't too many in the US. It was $90 and looks like it was hand painted
Don’t come to a Stormtroopers channel shouting hate for the Empire XD
Ace Cosplay Maybe you didn’t realise this is a ‘Clone Trooper’ video...
REPUBLIC REBORN Was quite aware of that when I made it :P I can like both... just been a stormtrooper for a lot longer :P
I like the empire tho :/
That looks great! Reminds me of the 2003 Clone Wars cartoon ARC trooper captain.
A women clone trooper impossible
There is a captain Rex version of this helmet with range finder already fitted. Great job. Looks awesome
*clicks on video
"This is where the fun begins"
Thank God I bought one of those when they just came out during the first seasons of the clone wars, I still have it in my room cause it's that good. Today they would never make a toy helmet with that quality and detail.