Natural Gas Burner Setup 200,000 BTU

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ส.ค. 2020
  • www.homedepot.com/p/KitchenAi...
    Home Depot Natural Gas Conversion Kit
    tejassmokers.com/Pilots-Gas-M...
    Tejas Smokers T-PILOT - Gas Burner Pilot Light, complete burner pilot and burner control assembly with dual needle valves, 24" of gas tubing, stainless steel pilot light head, stainless steel zip ties, gas inlet fitting, burner gas orifice fitting.
    Burner is from Ebay, just input 200,000 BTU burners and a bunch of burners will pop up.

ความคิดเห็น • 12

  • @user-zf4qs2jy3n
    @user-zf4qs2jy3n 2 ปีที่แล้ว +3

    Pro tip: use galvanized pipe if running outdoors or in wet locations.

  • @henryfrederick3485
    @henryfrederick3485 7 หลายเดือนก่อน

    put a "Y" at the input, a propane orifice and a natural gas orifice, a valve and quick connect on each. 1 burner, dual gas.

  • @bermudezdevelopment
    @bermudezdevelopment 4 ปีที่แล้ว

    Thanks for the video!!
    I mest up on the orofices.. lol

  • @Khaladas
    @Khaladas 3 ปีที่แล้ว +1

    So did you just take a propane fitting and drill it out? Can you share the fitting you used?

  • @oneundecided
    @oneundecided 2 ปีที่แล้ว

    Thank you for this video. I have found a similar gas burner on eBay, however it comes without the pilot light. Did you buy the pilot light from eBay too? What about the regulator? I could not find these on Ebay.

  • @ALLBOUTTHUGLIFE
    @ALLBOUTTHUGLIFE 3 ปีที่แล้ว +2

    That quick connect is set for ½lb. Psi rating 😬 Be careful...

  • @aldojr5552
    @aldojr5552 5 หลายเดือนก่อน

    What size drill bit did you use?

  • @chrisharrison3245
    @chrisharrison3245 ปีที่แล้ว

    how do you regulate the flow? I want to use a pressure canner and each time the flame needs to be adjusted . is the propane regulator ok to use as long as you drill large enough hole in the orifice?

    • @frankgeeves
      @frankgeeves  ปีที่แล้ว

      It was designed for propane so I had to drill orifice for natural gas. If your using propane you don't need to drill orifice

  • @renesteitz575
    @renesteitz575 3 ปีที่แล้ว

    tooo much power !

  • @PatrickSwayzeOnDbol
    @PatrickSwayzeOnDbol ปีที่แล้ว

    You are losing heat as the gas/flame is burning incorrectly.
    edit: you want only blue flame, not orange tips.

    • @frankgeeves
      @frankgeeves  ปีที่แล้ว

      the burner has an air intake, i do get blue flame when I allow les air in. Its ok for high heat