$25.00 DIY PORTABLE PANOPTICS Livescope Setup! EP 1622
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- NEW? Please SUBSCRIBE: / @asleepatthereel (Turn on 🔔)
I had an extra 1022, GLS10 Black Box and Livescope transducer so I decided to make a portable unit for two reasons. 1. A second angler can fish a different tree or not have to worry about staying in my cone during a tournament and 2. so I can take this in my flat bottom boat or on others boats. This is a very simply way to make it happen. To see the pole that I made a few years ago, check out this link. • $20 LIVESCOPE POLE MOU...
#CrappieCove #ACCCrappieStix #slabcrappie #Asleepatthereel
**MAKE SURE TO LIKE, COMMENT, SUBSCRIBE, AND HIT THE NOTIFICATION BELL TO SEE MORE**
If you would like more information or if you just want to keep up with my day to day you may also find me at my other social media links here:
Please visit our website at www.asleepatthereel.com
For Merch visit www.asleepatthe...
Facebook: / asleep-at-the-reel-cra...
Written permission obtained to use the Opening Song, "Faith And Freedom" by John Schlitt.
SPONSORS/AFFILIATES:
ACC Crappie Stix providing all Rods
Crappie Cove www.Crappiecove.com (Use Code “Asleep10” for 10% off purchases)
Beatdown Outdoor Products (Use code "AATR10” for 10% off purchases)
YOLOtek yolotek.com/?r... (Use Code "TheReel" For Free Shipping!)
Ampd Marine www.ampdmarine.com
Tyler Truck Accessories
BoneHead Tackle Baits
Jack O ’Diamonds Cars, Tyler, Texas
Poverty Canyon Ranch, San Angelo Texas
Skeeter ZX200 from Nautical Mile Marine 903-561-0388
Garmin/PanOptix Livescope installed by Nautical Mile Marine 903-561-0388
Thanks again for watching and if you like these videos don't forget to LIKE and SUBSCRIBE and turn Notifications on to get new content as soon as it’s up!
Asleep At The Reel
P.O. Box 131103
Tyler, TX 75713
LEGAL DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
I hope you enjoyed this video. If you have something that can be changed or improved upon, feel free to comment and let others know. This is a system that works for me but not for everyone. If you build this, let me know. I am always open to suggestions. Thanks for watching and I look forward to your comments!
Many thanks for a really nice video. Really enjoy your channel.
I don't own a Garmin yet but am looking seriously at them. One thing you might want to consider is some type of tie down strap if you have this unit sitting on the upper floor of the boat, so in case you accidently bump into it while fishing it doesn't go overboard. I think???? a simple nylon/velcro strap mounted to your deck area where you intend to set the box while fishing would do the trick.
@@helicopterjohns Thank you, that is a good idea. Honestly on my boat with a flat surface it sits flat and there is enough weight with the contents to include battery and the graph that you would have to kick it to make it move, but I like that idea, especially in a windy day and when I use it on my other boat. Thanks for watching and for the suggestion. I appreciate you!
Awesome rig-up!!!!!🤜🏼🤛🏼🏆🤙🏼.
You’re a beast brother!!!!!😎
Thank you my friend!
It worked great during the CAT tournament. Very stable and easy to move around. Thanks for the video.
Great to hear! You did a great job out there. The next one will be better!
I notched out the plywood to give the cables a little more room. I think I will also add an adel clamp on the back of the box to run the cables through to my uhd 93sv while in use. Thanks for the instruction on this video. I also enjoy watching your fishing videos.
Man those are great ideas. Thank You for sharing and thank you for watching and the comment. Have a great week and happy fishing.
Starting with just the echomap, will add the livescope soon. Thanks for this!
you are welcome. Hope you get it all set up soon!!! thanks for watching and commenting.
That is a great idea. Would love to see your next crappie tournament.
Thank you. You can see some of it in action in the last video I did. Will be shooting more as the year goes on! Thanks for watching my friend!
Great idea. You and I need to try it out on the Sand Bass run in your small aluminum boat up the river.
That would be cool! Might have to do that although it is hard to use in shallow water but you never know. Thanks for watching brother!
That is perfect for tournament fishing. Especially casting to single targets.
You got that right! now you need to get out here and fish with me!
@@AsleepAtTheReel I'll try and get a day off during the week pretty soon.
I like this setup better than ones I've seen with the screen attached inside the lid, but I worry about it being top-heavy and being anywhere near the side of the boat.
Thank you. It really is not that bad as the base has a lot of weight. I now use my 1222 on top of it and it holds pretty good. It I were in big waves that might be a problem. The other thing that could be done is just take a larger sheet of plywood and attach to the bottom which would give it more stability. We will be using it this weekend for a tournament. My partner will use that one and I will use the one attached to my trolling motor. We have learned that we just pull the transducer out of the water, move the unit to the inside of the boat when we are motoring, move it back when time to fish. I will be doing a video this weekend on it with the new Sniper Marine transducer pole so stay tuned and should have it posted later in the week or the start of next week. Thanks for the comments.
This is very good construction Sarge.. I can see how It can be used in many applications..good video buddy!!!
Thank you man, I appreciate it. It worked great on the water. A few things I could change if I were going to use it all the time, but not much. Thanks for watching and commenting.
Awesome video Sarge. If I ever get the money I think that system would work great on my kayak. Great information, thanks
Right on, it probably would. I might do the holes a little different. You probably do not need to have the breathing holes like I had and put some rubber stopper in that the wires go through, something a little more water proof, but yeah I think it would work great! thanks for watching and commenting.
Great video! When I built it I was able to fit a 50AH ecowoorthy battery and the gls 10 by using front and back of box instead of side to side. This saved me so much over a shuttle where the GLS is just out in the open!
That sounds great! Unfortunatly my box is not big enough to mount them the other way, it is to narrow, but it would have been nice to have a little wider box. I have not had a problem, but can see how rough water may make it unstable. One thing that I have changed is the RAM Mount. I have removed that since I needed it for another project and simply mounted it straight to the top. It actually works better and is a little more stable. Thanks for the comments and the watch. Have a great day!
Exact same setup I have except I added outside switches for the graph and gls10. As well I added a clear bowl up top to keep the transducer cord from having such a hard bend in it and I can see the light on the gls10 box.
That is a good idea on the bowl up top. I thought about using the switches, but honestly the only time I would use it is the beginning of the day and the end of the day and I have to open it up anyway to get the battery out to charge. Great minds think alike! 😂 Thanks for watching and commenting!
That is what I was going to do for my boat. I love that video and keep up the great videos and information about fishing and God bless you and your family
I think you will like it! Thank you so much and God Bless you and your family as well!
Great job Sarge! Now you are giving me an excuse to buy the new LS transducer! Lol see you on the water brother!
Ha Ha I already have the 34 on order!!! It is going to be great. We had to use John's transducer as mine was under the weather! ha ha
@@AsleepAtTheReel it is on my list I'm working toward now.
Man.... what a great idea 💡💡💡
Glad you liked it! Thanks for watching and commenting my friend!
NICE!!!!!!!!!
Thanks!!
Great video no electronics yet but looks like good idea. Only one suggestion. Sending it to me to try it out lol. Hey i tried lol
ha ha ha You a funny man! 😂 It is practical. If I were using it all the time I would put switches in it and a charging port so I would not have to get the battery out, but honestly might use it once a month. Def something to look at when you get electronics and you want them to be portable like for ice fishing! Thanks for watching!
@@AsleepAtTheReel t never works 😂😂 those moods sound awesome.
Good video
Is there another video for the ice fishing pole mount?
No Sir, I live in Texas so we do not have any ice. I would say that this could still be a good use for that. Just cut everything shorter. Still use the Ram mount but attached it to your portable unit someone. Great question!
Nice boat! I just saw you at my fishing place!
Thank You. You should have yelled at me!
@@AsleepAtTheReel Did you catch anything? I was on the fishing pier . I haven’t gotten one bite.
Hello, I just bought that same box with a 30Ah battery. Should I use a fuse block or stick with multiple in-line fuses?
Either is fine but would probably go with the in-line fuses. I say that simply because I think each one comes with a fuse built-in. No need to spend more. Not sure if they are different amps or not, but they are already set. If you want to put another in that is fine, just gives you more to check if something goes wrong.
Simple set up. Curious as I want a similar set up. Does the module heat up in the box? Is that something you need to worry about?
Thank You for the question. We have used this all day for a tournament in the June time frame. It really did not get that hot, for sure did not give any warnings or show signs of over heating. One thing to note is there are holes cut on both sides for wires but there is plenty of room for air flow.
@@AsleepAtTheReel that’s great. Where are you located just for weather reference?
How would you mount the pole to a boat that is not yours? Like you said using on another person boat?
Not really sure. The way I have it on one of my other videos is simply removing one screw and placing the ram mount there and running the mount off a ram mount. Other that that I am sure you could figure a way out to put a pole on the unit. I have not had to do this as I run it in my boat. Good question and something to think about!!
Hey does the transducer cable and other cable clear when the lid is close it just look kinda tight from the video I wanna do the same set up thank you
yes they do. There is a bend but I had the bend because of the original install. One guy sent me a picture of his top, he did the exact same thing, only took a piece of basically a plastic bowl and mounted it there. He cut the top and wood around the connections and put the clear plastic bowl on top with glue. That kept is water tight and he was able to see in to see the indicator light if there was a problem. That is something that I will add to this, but other than that, it works perfect. Thanks for watching and asking a question. Great question and hope I gave a good answer!
@@AsleepAtTheReel oh really dang wish you had a picture of it
@@atrboi8171 I don’t but basically cut a rectangle in the lid right above the cable connectors and get a rectangle plastic disposable bow and mount it above
What length is that ram mount? 6” ?
This one I believe is 12 inches, but really what matters is how much room do you have between your mounting location and where the pole should go. Hope that makes sense. Thanks for watching.
Gotcha! Thank you sir! Keep up the good work
Did you use a Amped Outdoors LIFEPO4 or NMC battery in your setup? Also what has been the battery life so far with the Livecope? Thanks, Mike.
I used the Amped Outdoors 30 AH. I believe the cost is $184.00. I have had it for over 2 years and it is still plugging along. Thanks for watching and for the question.
What # Plano box? Thanks!
I honestly do not know. I will look on it when I am at my storage building next time and see if it says.
Plano Tactical Series Ammo Crate Hunting Shooting Range Gear Box 1071600 BLK.