ASAP LOCK

Mobile fall arrester with locking function.
The ASAP LOCK is used with an ASAP’SORBER AXESS energy absorber to work at a distance from the rope and can be used for loads of up to 250 kg in two-person rescue situations.
Further information must be read prior to use at the manufacturer's instruction manual.
www.petzl.com/...
Correct management of back-up devices is essential at all times to ensure their successful deployment in the event of a fall.
Trainees must demonstrate correct use of a back-up device (and device lanyard, where appropriate) in accordance with best practice, and the manufacturer’s instructions. This includes checking the position and function of the back-up device at appropriate times.
NOTE: Some countries may have specific requirements for the selection of back-up systems.
Level 2 and Level 3 candidates shall demonstrate familiarity with a range of back-up devices and alternative systems, e.g. descent on two descending devices; controlling a safety line.
• Correct use and handling of the back-up system including, where applicable:
• Device lanyard selection and use;
• Placement in a high position to minimize any potential fall;
• Avoiding unnecessary handling;
• Avoiding dropping the device;
• Avoidance of tangles;
• CLEARANCE DISTANCE!!!
When using a back-up device during rescue, hauling and lowering, observe the need to minimize potential fall distances and resultant impact loads.

[@NickyHendriks]

I like the explanation of these videos but one detail is wrong, the carabiner should've been connecter the other way around to your harness so the spine of the biner faces out when falling. At least that's what everybody has been telling me over the years and on my IRATA course.

[@ropeaccessacademy]

Thanks for the feedback!
There are many old practices that are not necessarily beneficial with modern devices, this may be one of them.
Petzl does not specify which direction the carabiner should face. Ultimately the direction of the carabiner is up to the individual technician, as long as it is used in line with Petzl recommendations.
www.petzl.com/sfc/servlet.shepherd/version/download/06868000007jgobAAA

[@bntr1632]

AsapAbsorber it is disposable, do you need to buy another one?

[@NickyHendriks]

Yes, in the technical notice it says it can be used for 10 years after manufacturing date and has to be disposed of after that. The ASAP Lock itself can be used until it is worn out.