How to Take Apart your Hot Wheels Step by Step
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In this video i explain how to take apart your HOT WHEELS for Wheel Swaps , Paint Etc...
.
.
Here is a description of the tools im currently using.
.
Drill Bit- 9/64 (metal bit)
Currently using a Dremel but a drill will work too and is preferred.
IG - @3rdeye_diecast
**MY WEBSITE WHERE YOU CAN PURCHASE MY CUSTOMS!**
3rdeyediecastc...
#hotwheels #diecast #wheelswaps
God I wish they would make it simple for us and just put two screws on each end. Phillips But no they want to make us struggle.
CashRulez Dollas haha this is true 😩
I really hate all the scale car makers for that. Hopefully someone, someday will teach them a lesson and will have her/his own scale car maker with a screw on each end and make it easy for everyone just to swap the wheels
Frfr
Its because they dont want you to open it
No, it's because of cheaper and faster production process 🤦🏻♂️
Imagine putting mini hydraulics inside 😂
Just put little springs lmao
liljay jt lmao
That would be sick😂
Little motors
Tomica cars have it
Anybody else notice that he was drilling in reverse.
How funny.
Magic!
Dude you definetly *USED A HAND DRILL*
That's a harbor freight bootleg dremel........
No i used a cheap dremel from harbor freight
Same difference.(Lol)😊
@@GMO--ge4ir Definitely not. Just a rotary tool with a drill bit attached...
Its a dremmel
over 8 minutes long to show how to drill the 2 screws out???
Thanks for watching all 8 minutes! 💙
hey! as a fellow hot wheel customer i just wanted to let you know that the mini pilot holes are also to put a screw into :) it makes it much easier to thread it
Indeed my friend 🤙🏽
And i never asked what your IG is if you have one for your customs
You can find me @3rdeye_diecast 🤙🏽
My thumb is now bleeding uncontrollably and my hot wheels is now on the other side of my room
🤣🤣🤣 🤷🏽♂️ new video much better take a look.
the pre-drill is to drill the post and tap in treads to add screws for refitting body to chassis and easyer for future customising
I just glue
🔥🔥🔥🔥
When you have more chunk of metal on one half of the rivet than the other, you know that you're in trouble; I experienced this a few times myself. It's a pain....
TOM indeed
Yeah. I just f*cked up my ice charger. Idk what the f to do. I litterally messed up the base.
Really 9 minutes to drill out two rivets 🤦🏽♂️
Jaime Vasquez normally its less that 1-2 minutes.
Jaime Vasquez the reason it was 9 minute is because he was being helpful and saying what he used and getting prepared so really it would take around 3 minutes
How not to use tools for 9 minutes
You definitely need to learn how to use tools before doing a video, never grab the business end of anything, and then you had your bad on the power end, and that razor, take care of that cars paint when taking it apart, even if your going to repaint the body you still don’t want scratches in it. And I hope your wearing glasses of some sort.
Mike Kennett thanks for your concern but no issues here though. over a year now and countless cars have been opened still have all my fingers lol
Got a Hotwheels the other day, very nice body with a nice shade of green and tons of stickers, how I like them. But the seats are banana yellow, and so effin ugly. It's a single piece of plastic, as usual, so I just wanna paint it black, or even tan, but banana yellow is just too much.
Hahaha yeah hit it with a black would look good! 💪🏽
YOUR DRILL BIT IS >> Dull >> *It,
Needs Sharpening. My drill bit takes about 3 seconds...
This video is old and was using an weak dremel . I have since upgraded and now use a drill. 123 please see my latest video using drill ... thanks for watching
you talk to much just do the job!!!
I prefer when people talk when doing a tutorial
Thank you!! I agree!
Thanks for watching ! 😘
Thats boring but still luv it
🤣🤣
Waaaaaay too much backstory and unnecessary info.
Thanks for watching ! 😘
How do you put it back together though ?
Locutz M some people tap the posts for screws to go in but i just use a little super glue... only downside is you cant open it up after unless you drill again
Great job! It’s not easy and it takes practice. Well done👊🏻
Thanks bud!
I left my like and my comment because you just gain another subscriber great video man thank you for sharing from California a huge hello to you man
HuntingHotWheels247 thank you man i appreciate the support...check out my IG @3rdeye_diecast
You need a sharper bit for starters, wholy crap! and a cordless drill.
Lol this video is old I have definitely got a better bit and a cordless drill now check out my latest video you will see
They’re called rivets. And they suck. I restore real cars for a living and I encounter them on some stuff.
Yes rivets indeed ... in this case a 9/64 drill bit handles them well... i made a mew video using a drill as opposed to a dremel enjoy
@@3rdeyediecast644 I’m not concerned how to drill them out I’m sure I can do that, it’s getting them back together again after that I wanna know first
Fun fact
You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more.
Please don’t use cheap harbor freight drill bits.
Lol this video is 4 years old now, i have since updated many things my bro. But i thank you bud….You follow me on IG by the way .. @3rdeye_diecast 💪🏽
Do you have an updated video? @@3rdeyediecast644
am i the only one how tries to take it apart by my teeth and my nails
Saqib Sayyed yeah
Yes you are the only one and you will never be able to do it that way
🤣🤣🤣
Also just starting out.
I HAVE a drill,& I can tell you,it ain't easy,AT ALL‼️😒
Is your,umm,"DREMEL",cordless?🤭🤔
GMO-1974 no it plugs into the wall..
Bit size 1:54 I agree but only tried once.
Awesome!!
But can you put the car together without it falling apart?
put superglue on the bottom, or drill the pilot hole into it and thread a tiny screw into the hole :)
Yes with a pilot hole and screws see my IG page @3rdeye_diecast
I dont have a drill the only thing i have is a few pack of scredrivers and 3 glues
I dont think thats gonna cut it :(
@@3rdeyediecast644 well i did cut a few cars with a flat head screw driver
Where’s the mini one that was inside
This video could be thirty seconds.
Thanks for watching !
I got hot wheel car
Awesome!
Please use some of your TH-cam money to buy a drill
🤣🤣🤣🤣 this video is old I have since upgraded! Lol
How can i take apart my lionel racing car?
Hmmm thats a good question ive never done one of those
You talk too much before doing anything lol
Lol thanks for watching 😉
That skufone throwie tho
Steve R you know!
Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.
Yeah this video is old now i have since upgraded to a drill works great. Watch my newest video im using it there
i have the same hot wheels as the video
Awesome!!!
Time to prove my parents wrong
🤣🤣🤣🤣
Latest Video with Updated tools.
th-cam.com/video/BtWV7Ct8jbg/w-d-xo.html
Can you you yous Anything else
No the dremel is the bare minimum you can use. I now use a 20V drill now which makes it so much easier . I will post a new video soon!
What #
I have a small bit, and it’s good to get started, but it doesn’t get any bigger
You need to use the 9/64 bit in order to completely take apart.
MATE! what the fUK waz that!
? Not sure what you mean ?
I want to do a repaint on two old dairy deliveries the blue buggs bunny and the white York peppermint. 3D Botmaker sent me to other channels to learn
🔥🔥🔥🔥
Hmm. 🤔 5/32. Got it.
💯
Mine doesn't get apart
Really? Make sure the ring from rivet is totally removed ... i have a new video up take a look
What do you write??
🤐
Are you suppose to drill into the car or pulling it out?
No just the rivets
I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill
Well its either metal base or plastic you will definitely be able to tell
Gosh, that dremel is loud!
It is!! I hated it! I have a new video up now using a drill
P
Q
Thanks so much i bought a hot wheels and it was like tilted of the base
Sweet!
#usescrewforhotwheels
👇
I do now this video is very old
Skiff ykk in the cut 👀
Yeee! You see it 😎💪🏽
Why do u wanna take apart ur Hot Wheel
To customize
Sounds like my dad 🤣💀
9 64 srill bit
Yes 👍🏽
you crazy yes
🤪🤪🤪
Hi. I recently got into this hobby. I borrowed my dad's Dremel to open up my rx7 but it doesn't seem like I'm making any progress. I also asked my dad to help me drill but he also made no progress. If anyone knows what's wrong, I would really appreciate it if you could tell me how to do it correctly. Thanks.
damonchaywj I’m going to try to make another video soon subscribe this way you can stay posted
Like he said they aren't all equal. Try drilling the 55 Chevy Belair base isn't great drilling on.
Congratulations for 970 subscribers
Thank you!!
No problem
A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.
Definitely! I have since upgraded since this video! 💪🏽💪🏽💪🏽
Oi
🔥🔥🔥🔥
Thx bro
Thank you for watching!
Wohoo!
Yeeee! 🤙🏽
You sure make something that easy look hard.
Lol this is an old video when I first started I have since evolved. Thanks for watching though. 😘
What brand of drill bits??
Brand does not matter just make sure not wood drill bits
and how can i do for remake it. _.
I just purchased a Dream Van XGW. Rear tires aren’t the best, and could stand replacing. This only has one clear bit on the underside.
Awesome ! Some casting will only have one rivet but most will have 2
You can use a dremmel, but at a lower speed., on this video it was too fast.
I agree, i use a drill now new video up if you want to check it out
The best tool to use would be a small drill press from Harbor Freight and have a small vice attached to the work table. You would be able to make clean straight holes.
I use a hand held drill now much better
come on guys we need to get this awesome guy to 1000 subs we can do it
💙💙💙
Do what you got to I take mine's apart with a screw driver
eduardo torres oh wow nice!
eduardo torres how?
Damn, i really need to know
Can i do this on a normal hot wheels which isnt custom?
Absolutely!!
Yeah that's what happened to my sports gruppo car
💯💯
*So you get your 17 inch 500 dollar drill*
Lol drill was $30 new video is up check it out!
Use a heat gun from harbor freight you heat the pin and they come off neatly
Oh aight very cool imma see if i try that in the future 🤙🏽
This car is a plastic body with plastic base?
HWED Hotwheel-Ed no metal body plastic base
Good job it really helped!
Awesome!
Enjoyed the vid
Thank you!
This man take so long i wish there was a more simple way
⏳⏳⏳
Skuf ykk sheesh that’s a gem right there 🔥🤘🏼
💯💯💯
How do you put it back
Danielle Millman there are a few things you can do. The easy way would be to super glue them back together or you can get self tapping screws i dont remember the exact size at the moment but i will repost here soon... but you can screw them back together
Stop
Go ?
What type of drill did you use
Im using a 20 Volt Black&Decker now. Here is the link to my new updated video
th-cam.com/video/BtWV7Ct8jbg/w-d-xo.html
@@3rdeyediecast644 Is it this type of drill you use th-cam.com/video/U1O0MeG7HiM/w-d-xo.html
Can u post a ling to the dremmel please?
Hardeep Rahil i dont have the link offhand but go to www.harborfreight.com
Who else drilled through the bonnet
Lol!
Привет круто. 👍👍👍👍
🔥🔥🔥
U talk a lot
🗣🗣🗣
Does it click on
Chris Cruz yes it has a switch
Nice man
Thanks bud!
So a "Drill Master" is not a drill, but a Dremel. Got it.
Hahah dumb right lol
👍👍👍💯
🙏🏽🙏🏽🤙🏽🤙🏽🔥🔥🔥
But yet again how do you put it together!😂
A few ways sometimes they snap back together , you cal also use super glue in rivet holes, or the best option is to drill pilot holes and use screws!
Exacto
🤙🏽🤙🏽🤙🏽
I destroyed my nissan skyline by trying to put nail polish on its tailights tried to remove then with vipes and it destroyed one of my shinning rim, I am deviated that nissan skyline from fast and furious was a rarer piece...
😭😭😭
Now I have learned there is a ring and to drill straight. Instead of sitting I think now I will use a table to get a straighter drill movement. Thanks man.
Wooo!! Awesome ! Yes straight is definitely the key ...glad i could help! Thanks for watching i need to put up a new video using my drill now
Are you gonna do a corvette??
kching consulting eventually yes i will. I have a few projects in line. Do you have any Corvette you like in particular?
Nice skuf sticker, that's a gem💎🔥!!
Indeed 😎
When you were a kid and did the water bottle thing with your bike 3:29
🤣🤣
Which dremel?
Rendered Rex was a cheap one i got from harbor freight $5