Love your vidio i got a 2006 impala put a lot of money into it lately but its still a good car cheaper than a new one YOUR VIDIOS ARE GREAT YOU GET RIGHT TO THE POINT AND I LOVE THAT
I have a P0172 on my 2006 impala also a service traction control light replaced intake manifold gasket upper and lower replace spark plugs and wires but i didnt change coil could that be my P0172 code its trowing service traction control could that be my front bearings allready changed the rear bearings??
Like the vid, 2 things tho. 1 What was the story on the car? 2 I understand you'll get better, but for us that are watching I'd like to see more exactly what ur doing. Other than that, I really like the vid. Better than most. Very thorough for a first time.
The wire harness under the passenger side tire I have a dark green and tan wire that were pinched and off I cant found where they go.. I didn’t seem them in the video with the rest of the wires hanging
I wish I could help but it's been a while since I did this one and can't remember that far back. Try alldata and see if you can find a wire diagram. Thanks for watching!
Either your shifter is not putting the transmission in park or something in the linkage inside your transmission is messed up. The torque converter has nothing to do with it not going in park.
You can probably see it by dropping the pan but im not sure. I would look at the shifter cable and see if it is moving the linkage back and forth all the way before I dropped the pan.
I'm not exactly sure of the interchangeability of those year models but if you search google you should be able to get some more information. Thanks for watching the video! Please subscribe and click the notification button. More videos coming soon!
@@thecardoctor when lining my engine up what should I be looking for to make sure its aligned up right and where do I go to find out the torque for the bolts
There should be some dowel pins on each side of the engine that will line up to the transmission and when they are fully seated the bolt holes should be lined up. As far as the torque specs go I usually use alldatadiy.com. It cost about $20 per vehicle but they have all the info you will need!
how many total hours in this project? would it not be cheaper to rebuild the tranny? and you have the room and lots of good stuff. why not get you a lift? i could never do this. I've always been great at tearing stuff apart but getting is back together is another story haha
I enjoy watching your videos it's the only one on TH-cam that answers my question I'm a DIY it's my first time doing a front wheel drive transmission have a 2009 Pontiac G6 and your video has given me direction on which way to attack my problem thank you very much hope to see more of your videos
Love your vidio i got a 2006 impala put a lot of money into it lately but its still a good car cheaper than a new one YOUR VIDIOS ARE GREAT YOU GET RIGHT TO THE POINT AND I LOVE THAT
Your a good mechanic and you. Have a lot of patience very good video
You are a great mechanic!
I have a P0172 on my 2006 impala also a service traction control light replaced intake manifold gasket upper and lower replace spark plugs and wires but i didnt change coil could that be my P0172 code its trowing service traction control could that be my front bearings allready changed the rear bearings??
Like the vid, 2 things tho. 1 What was the story on the car? 2 I understand you'll get better, but for us that are watching I'd like to see more exactly what ur doing. Other than that, I really like the vid. Better than most. Very thorough for a first time.
There is a part 1 video that explains the car in better detail. Thanks for watching!
Quiero saber si puedo ponerle este motor completo a un Chevrolet impala 2007. muchas gracias desde república dominicana
Put a few bolts in through the pan before you set the pan helps keep holes lined up. But good job brother.
Thanks for watching
The wire harness under the passenger side tire I have a dark green and tan wire that were pinched and off I cant found where they go.. I didn’t seem them in the video with the rest of the wires hanging
I wish I could help but it's been a while since I did this one and can't remember that far back. Try alldata and see if you can find a wire diagram. Thanks for watching!
Good job I couldn't do it better myself😅👏🏾👍🏾
Thanks for watching!
1:14:14 Looks like she was Overheating a lil
Car runs great and is still running great today! Thanks for watching!
Do you leave the bottom motor mount in the engine when dropping the engine in the car?? Or do you leave the mount in the car ?
I usually replace front pump seal or torque converter seal?
That bracket that you showed at the 5950 mark what is that for to bolt the trans down?
Looked at the 59:50 mark and I am holding the transmission cooler lines is that what you are talking about?
@@thecardoctor I'm sorry 21:50
Yea thats the transmission bracket for the mount there. Bolts on to the side of the transmission.
@@thecardoctor thank you
Yoh did an awesome job sir💯💯💯💯
Thanks for watching!
I.bolted my flywheel to the torque conver and when I take the car off the emergency brake it keeps rolling why is that?
Either your shifter is not putting the transmission in park or something in the linkage inside your transmission is messed up. The torque converter has nothing to do with it not going in park.
@@thecardoctor how do I check the linkage in the transmission
You can probably see it by dropping the pan but im not sure. I would look at the shifter cable and see if it is moving the linkage back and forth all the way before I dropped the pan.
@@thecardoctor I found the problem the cv axle on the driver side wasn't hooked in smh
Glad you figured it out!
Can you swap a 2006 chevy impala transmission to a 2009 impala?
My 2009 impala’s transmission stopped working
I'm not exactly sure of the interchangeability of those year models but if you search google you should be able to get some more information. Thanks for watching the video! Please subscribe and click the notification button. More videos coming soon!
What’s your total time if you can remember doing it this way?
About 7 or 8 hours total I think. Thanks for watching!
Do I have to torque the bolts on the engine when I drop it in the car
Not sure which bolts you are referring too but its a safe bet to torque all the bolts to spec.
@@thecardoctor when lining my engine up what should I be looking for to make sure its aligned up right and where do I go to find out the torque for the bolts
There should be some dowel pins on each side of the engine that will line up to the transmission and when they are fully seated the bolt holes should be lined up. As far as the torque specs go I usually use alldatadiy.com. It cost about $20 per vehicle but they have all the info you will need!
@@thecardoctor ok sounds good thanks for the help and keep making great vids
@@thecardoctor what year impala was that you was working on
Do I have to remove the engine as well ??
I did because I felt it was the easier option but you can probably find a video of someone just removing the transmission. Thanks for watching!
how many total hours in this project? would it not be cheaper to rebuild the tranny?
and you have the room and lots of good stuff. why not get you a lift?
i could never do this. I've always been great at tearing stuff apart but getting is back together is another story haha
I enjoy watching your videos it's the only one on TH-cam that answers my question I'm a DIY it's my first time doing a front wheel drive transmission have a 2009 Pontiac G6 and your video has given me direction on which way to attack my problem thank you very much hope to see more of your videos
@@mikekool5090 Thanks man! Dont forget to like and subscribe! More videos coming soon! Have a great day!
Where are you located
SC
Going through this myself, don't ever use the junk yard transaxles from these cars.
😂